perf stat: add interval counter printing
cover perf stat: add interval counter printing
This small patchset extends perf stat with the -T option.
The -T option enables interval printing. It expects an interval duration in milliseconds. Minimum is 100ms. Once, activated perf stat prints events deltas since last printout. All modes are supported.
$ perf stat -T 1000 -e cycles noploop 10 noploop for 10 seconds 1.000086918 2385155642 cycles # 0.000 GHz 2.000267937 2392279774 cycles # 0.000 GHz 3.000385400 2390971450 cycles # 0.000 GHz 4.000504408 2390996752 cycles # 0.000 GHz 5.000626878 2390853097 cycles # 0.000 GHz
The output format makes it easy to feed into a plotting program such as gnuplot when the -T option is used in combination with the -x option:
$ perf stat -x, -T 1000 -e cycles noploop 10 noploop for 10 seconds 1.000084113,2378775498,cycles 2.000245798,2391056897,cycles 3.000354445,2392089414,cycles 4.000459115,2390936603,cycles 5.000565341,2392108173,cycles
The first patch adds the code to keep previous counts. The second is the actual extension of perf stat.
Stephane Eranian (2):
perf tools: add evsel prev_raw_count field
perf stat: add interval printing
tools/perf/Documentation/perf-stat.txt | 3 + tools/perf/builtin-stat.c | 156 ++++++++++++++++++++++++++++---- tools/perf/util/evsel.c | 21 +++++ tools/perf/util/evsel.h | 1 + 4 files changed, 165 insertions(+), 16 deletions(-)
Signature · 1 line
1.7.9.5
PATCH 1/2 perf tools: add evsel prev_raw_count field
This field will be used by commands which print
counter deltas on regular timer intervals,
such as perf stat -T.
--- tools/perf/util/evsel.c | 21 +++++++++++++++++++++ tools/perf/util/evsel.h | 1 + 2 files changed, 22 insertions(+)
tools/perf/util/evsel.c +21 -0
@@ -646,6 +646,17 @@ int __perf_evsel__read_on_cpu(struct perf_evsel *evsel,if (readn (FD (evsel, cpu, thread), &count, nv *sizeof (u64)) <0 )return -errno; +if (evsel->prev_raw_counts) { +struct perf_counts_values tmp; + + tmp = evsel->prev_raw_counts->cpu[cpu]; + evsel->prev_raw_counts->cpu[cpu] = count; + + count.val = count.val - tmp.val; + count.ena = count.ena - tmp.ena; + count.run = count.run - tmp.run; + } +if (scale) {if (count.run ==0 ) count.val =0 ;
@@ -684,6 +695,16 @@ int __perf_evsel__read(struct perf_evsel *evsel, } } +if (evsel->prev_raw_counts) { +struct perf_counts_values tmp = evsel->prev_raw_counts->aggr; + + evsel->prev_raw_counts->aggr = *aggr; + + aggr->val = aggr->val - tmp.val; + aggr->ena = aggr->ena - tmp.ena; + aggr->run = aggr->run - tmp.run; + } + evsel->counts->scaled =0 ;if (scale) {if (aggr->run ==0 ) {
tools/perf/util/evsel.h +1 -0
@@ -53,6 +53,7 @@ struct perf_evsel {struct xyarray *sample_id;u64 *id;struct perf_counts *counts; +struct perf_counts *prev_raw_counts;int idx;u32 ids;struct hists hists;
Signature · 1 line
1.7.9.5
PATCH 2/2 perf stat: add interval printing
In reply to Stephane EranianThis patch adds a new printing mode for perf stat. It allows internval printing. That means perf stat can now print event deltas at regular time interval. This is useful to detect phases in programs.
The -T option enables interval printing. It expects an interval duration in milliseconds. Minimum is 100ms. Once, activated perf stat prints events deltas since last printout. All modes are supported.
$ perf stat -T 1000 -e cycles noploop 10 noploop for 10 seconds 1.000086918 2385155642 cycles # 0.000 GHz 2.000267937 2392279774 cycles # 0.000 GHz 3.000385400 2390971450 cycles # 0.000 GHz 4.000504408 2390996752 cycles # 0.000 GHz 5.000626878 2390853097 cycles # 0.000 GHz
The output format makes it easy to feed into a plotting program such as gnuplot when the -T option is used in combination with the -x option:
$ perf stat -x, -T 1000 -e cycles noploop 10 noploop for 10 seconds 1.000084113,2378775498,cycles 2.000245798,2391056897,cycles 3.000354445,2392089414,cycles 4.000459115,2390936603,cycles 5.000565341,2392108173,cycles
--- tools/perf/Documentation/perf-stat.txt | 3 + tools/perf/builtin-stat.c | 157 ++++++++++++++++++++++++++++---- 2 files changed, 144 insertions(+), 16 deletions(-)
tools/perf/Documentation/perf-stat.txt +3 -0
@@ -114,6 +114,9 @@ Log output to fd, instead of stderr. Complementary to --output, and mutually ex perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' -- make -s -j64 O=defconfig-build/ bzImage +-T:: +--print-interval msec:: + print count deltas every N milliseconds (minimu: 100ms) EXAMPLES --------
tools/perf/builtin-stat.c +141 -16
306 lines not on this page · raw message
Signature · 1 line
1.7.9.5
Quoted 1 line · Stephane Eranian
This small patchset extends perf stat with the -T option.
I already use that option for my haswell patchkit for transactional monitoring. Sorry, please use something else.
I agree it's a useful feature, although it can be simulated today.
-Andi
Quoted 6 lines · Andi Kleen
Quoted 1 line · Stephane Eranian
This small patchset extends perf stat with the -T option.
I already use that option for my haswell patchkit for transactional monitoring. Sorry, please use something else.
Fine. I'll find another single letter option.
Quoted 2 lines
I agree it's a useful feature, although it can be simulated today.
You an simulate in system-wide, not clear for per-thread mode.
Quoted 1 line
-Andi