Skip to contentSkip to conversation

ARM: OMAP2+: System timer updates

PATCH Superseded Jon Hunter 2 participants 11 messages Feb 4, 2013

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Jon Hunter

author
#0 lore raw

v2 cover ARM: OMAP2+: System timer updates

This series consists mainly of clean-ups for clockevents and clocksource timers on OMAP2+ devices. The most significant change in functionality comes from the 5th patch which is changing the selection of the clocksource timer for OMAP3 and AM335x devices when gptimers are used for clocksource. This change came about from Vaibhav Bedia's series for AM335x [1]. See patch for more details on the exact nature of the change.

Boot tested with and without device-tree on OMAP2420 H4, OMAP3430 SDP, OMAP3430 Beagle Board, OMAP4430 SDP and AM335x EVM (AM335x only supports device-tree boot). Also boot tested boards with kernel boot parameter "clocksource=gp_timer".

This series is based upon ARM-SoC next branch.

V2 changes:
- Fixed bug in patch that updates clocksource and clockevents timer names to use the hwmod timer names (thanks Vaibhav Bedia!)
- Updated patch that removes the hard-coded ID test to return an error as soon as clk_set_parent fails instead of waiting for the end of the function.
- Fixed bug in patches that "simplify system timer clock definitions" and "simplify system timer definitions" that was prevent omap4/5 boards from booting with kernel boot parameter "clocksource=gp_timer".
- Updated changelog for patch "simplify system timer definitions" per feedback received from Igor.
- Added new patch to store the timer ID in the omap_dm_timer structure to clean-up the code.
- Added new patch to fix a sparse warning seen in ARM-SOC next.

[1] https://patchwork.kernel.org/patch/1921421/

Jon Hunter (7):
ARM: OMAP2+: Fix selection of clockevent timer when using device-tree
ARM: OMAP2+: Display correct system timer name
ARM: OMAP2+: Remove hard-coded test on timer ID
ARM: OMAP2+: Simplify system timer clock definitions
ARM: OMAP2+: Simplify system timers definitions
ARM: OMAP2+: Store ID of system timers in timer structure
ARM: OMAP4+: Fix sparse warning in system timers

 arch/arm/mach-omap2/board-cm-t3517.c |    2 +-
 arch/arm/mach-omap2/board-generic.c  |    2 +-
 arch/arm/mach-omap2/common.h         |    3 +-
 arch/arm/mach-omap2/timer.c          |  121 +++++++++++++++++-----------------
 4 files changed, 65 insertions(+), 63 deletions(-)
Signature · 1 line
1.7.10.4
author
#1 lore raw

PATCH v2 1/7 ARM: OMAP2+: Fix selection of clockevent timer when using device-tree

Commit 9725f44 (ARM: OMAP: Add DT support for timer driver) added device-tree support for selecting a clockevent timer by property. However, the code is currently ignoring the property passed and selecting the first available timer found. Hence, for the OMAP3 beagle board timer-12 is not being selected as expected. Fix this problem by ensuring the timer property is passed to omap_get_timer_dt().

---
 arch/arm/mach-omap2/timer.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-omap2/timer.c +1 -1
index 2822833..72c2ca1 100644
@@ -227,7 +227,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	int r = 0;
 
 	if (of_have_populated_dt()) {
-		np = omap_get_timer_dt(omap_timer_match, NULL);
+		np = omap_get_timer_dt(omap_timer_match, property);
 		if (!np)
 			return -ENODEV;
 
Signature · 1 line
1.7.10.4
author
#2 lore raw

PATCH v2 2/7 ARM: OMAP2+: Display correct system timer name

In reply to Jon Hunter

Currently on boot, when displaying the name of the gptimer used for clockevents and clocksource timers, the timer ID is shown. However, when booting with device-tree, the timer ID is not used to select a gptimer but a timer property. Hence, it is possible that the timer selected when booting with device-tree does not match the ID shown. Therefore, instead display the HWMOD name of the gptimer and use the HWMOD name as the name of clockevent and clocksource timer (if a gptimer is used).

---
 arch/arm/mach-omap2/timer.c |   24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)
arch/arm/mach-omap2/timer.c +13 -11
index 72c2ca1..83118fb 100644
@@ -129,7 +129,6 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 }
 
 static struct clock_event_device clockevent_gpt = {
-	.name		= "gp_timer",
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.rating		= 300,
 	.set_next_event	= omap2_gp_timer_set_next_event,
@@ -214,10 +213,11 @@ static u32 __init omap_dm_timer_get_errata(void)
 }
 
 static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
-						int gptimer_id,
-						const char *fck_source,
-						const char *property,
-						int posted)
+					 int gptimer_id,
+					 const char *fck_source,
+					 const char *property,
+					 const char **timer_name,
+					 int posted)
 {
 	char name[10]; /* 10 = sizeof("gptXX_Xck0") */
 	const char *oh_name;
@@ -254,6 +254,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (!oh)
 		return -ENODEV;
 
+	*timer_name = oh->name;
+
 	if (!of_have_populated_dt()) {
 		r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL,
 						   &irq);
@@ -327,7 +329,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 	__omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);
 
 	res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property,
-				     OMAP_TIMER_POSTED);
+				     &clockevent_gpt.name, OMAP_TIMER_POSTED);
 	BUG_ON(res);
 
 	omap2_gp_timer_irq.dev_id = &clkev;
@@ -341,8 +343,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 					3, /* Timer internal resynch latency */
 					0xffffffff);
 
-	pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n",
-		gptimer_id, clkev.rate);
+	pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name,
+		clkev.rate);
 }
 
 /* Clocksource code */
@@ -359,7 +361,6 @@ static cycle_t clocksource_read_cycles(struct clocksource *cs)
 }
 
 static struct clocksource clocksource_gpt = {
-	.name		= "gp_timer",
 	.rating		= 300,
 	.read		= clocksource_read_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
@@ -449,6 +450,7 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
 	clksrc.errata = omap_dm_timer_get_errata();
 
 	res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL,
+				     &clocksource_gpt.name,
 				     OMAP_TIMER_NONPOSTED);
 	BUG_ON(res);
 
@@ -461,8 +463,8 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
 		pr_err("Could not register clocksource %s\n",
 			clocksource_gpt.name);
 	else
-		pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
-			gptimer_id, clksrc.rate);
+		pr_info("OMAP clocksource: %s at %lu Hz\n",
+			clocksource_gpt.name, clksrc.rate);
 }
 
 #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
Signature · 1 line
1.7.10.4
author
#3 lore raw

PATCH v2 3/7 ARM: OMAP2+: Remove hard-coded test on timer ID

In reply to Jon Hunter

Currently, when configuring the clock-events and clock-source timers for OMAP2+ devices, we check whether the timer ID is 12 before attempting to set the parent clock for the timer.

This test was added for OMAP3 general purpose devices (no security features enabled) that a 12th timer available but unlike the other timers only has a single functional clock source. Calling clk_set_parent() for this 12th timer would always return an error because there is only one choice for a parent clock. Therefore, this hard-coded timer ID test was added.

To avoid this timer ID test, simply check to see if the timer's current parent clock is the desired parent clock and only call clk_set_parent() if this is not the case.

---
 arch/arm/mach-omap2/timer.c |   25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)
arch/arm/mach-omap2/timer.c +13 -12
index 83118fb..ec2fb80 100644
@@ -224,6 +224,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	struct device_node *np;
 	struct omap_hwmod *oh;
 	struct resource irq, mem;
+	struct clk *src;
 	int r = 0;
 
 	if (of_have_populated_dt()) {
@@ -280,22 +281,22 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (IS_ERR(timer->fclk))
 		return -ENODEV;
 
-	/* FIXME: Need to remove hard-coded test on timer ID */
-	if (gptimer_id != 12) {
-		struct clk *src;
-
-		src = clk_get(NULL, fck_source);
-		if (IS_ERR(src)) {
-			r = -EINVAL;
-		} else {
-			r = clk_set_parent(timer->fclk, src);
-			if (IS_ERR_VALUE(r))
-				pr_warn("%s: %s cannot set source\n",
-					__func__, oh->name);
+	src = clk_get(NULL, fck_source);
+	if (IS_ERR(src))
+		return -EINVAL;
+
+	if (clk_get_parent(timer->fclk) != src) {
+		r = clk_set_parent(timer->fclk, src);
+		if (IS_ERR_VALUE(r)) {
+			pr_warn("%s: %s cannot set source\n", __func__,
+				oh->name);
 			clk_put(src);
+			return r;
 		}
 	}
 
+	clk_put(src);
+
 	omap_hwmod_setup_one(oh_name);
 	omap_hwmod_enable(oh);
 	__omap_dm_timer_init_regs(timer);
Signature · 1 line
1.7.10.4
author
#6 lore raw

PATCH v2 4/7 ARM: OMAP2+: Simplify system timer clock definitions

In reply to Jon Hunter

In commit c59b537 (ARM: OMAP2+: Simplify dmtimer clock aliases), new clock aliases for dmtimers were added to simplify the code. These clock aliases can also be used when configuring the system timers and allow us to remove the current definitions, simplifying the code.

Please note that for OMAP4/5 devices (unlike OMAP2/3 devices), there is no clock alias for "timer_sys_ck" with NULL as the device name. Therefore we still need to use the alias "sys_clkin_ck" for these devices.

---
 arch/arm/mach-omap2/timer.c |   37 ++++++++++++++-----------------------
 1 file changed, 14 insertions(+), 23 deletions(-)
arch/arm/mach-omap2/timer.c +14 -23
index ec2fb80..4213bf4 100644
@@ -57,15 +57,6 @@
 #include "common.h"
 #include "powerdomain.h"
 
-/* Parent clocks, eventually these will come from the clock framework */
-
-#define OMAP2_MPU_SOURCE	"sys_ck"
-#define OMAP3_MPU_SOURCE	OMAP2_MPU_SOURCE
-#define OMAP4_MPU_SOURCE	"sys_clkin_ck"
-#define OMAP2_32K_SOURCE	"func_32k_ck"
-#define OMAP3_32K_SOURCE	"omap_32k_fck"
-#define OMAP4_32K_SOURCE	"sys_32k_ck"
-
 #define REALTIME_COUNTER_BASE				0x48243200
 #define INCREMENTER_NUMERATOR_OFFSET			0x10
 #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET		0x14
@@ -569,27 +560,27 @@ void __init omap##name##_sync32k_timer_init(void)		\
 }
 
 #ifdef CONFIG_ARCH_OMAP2
-OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon",
-			2, OMAP2_MPU_SOURCE);
+OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon",
+			2, "timer_sys_ck");
 #endif /* CONFIG_ARCH_OMAP2 */
 
 #ifdef CONFIG_ARCH_OMAP3
-OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon",
-			2, OMAP3_MPU_SOURCE);
-OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure",
-			2, OMAP3_MPU_SOURCE);
-OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon",
-		       2, OMAP3_MPU_SOURCE);
+OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon",
+			2, "timer_sys_ck");
+OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
+			2, "timer_sys_ck");
+OMAP_SYS_GP_TIMER_INIT(3_gp, 1, "timer_sys_ck", "ti,timer-alwon",
+		       2, "timer_sys_ck");
 #endif /* CONFIG_ARCH_OMAP3 */
 
 #ifdef CONFIG_SOC_AM33XX
-OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon",
-		       2, OMAP4_MPU_SOURCE);
+OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, "timer_sys_ck", "ti,timer-alwon",
+		       2, "timer_sys_ck");
 #endif /* CONFIG_SOC_AM33XX */
 
 #ifdef CONFIG_ARCH_OMAP4
-OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
-			2, OMAP4_MPU_SOURCE);
+OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
+			2, "sys_clkin_ck");
 #ifdef CONFIG_LOCAL_TIMERS
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29);
 void __init omap4_local_timer_init(void)
@@ -618,8 +609,8 @@ void __init omap4_local_timer_init(void)
 #endif /* CONFIG_ARCH_OMAP4 */
 
 #ifdef CONFIG_SOC_OMAP5
-OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
-			2, OMAP4_MPU_SOURCE);
+OMAP_SYS_32K_TIMER_INIT(5, 1, "timer_32k_ck", "ti,timer-alwon",
+			2, "sys_clkin_ck");
 void __init omap5_realtime_timer_init(void)
 {
 	int err;
Signature · 1 line
1.7.10.4
author
#7 lore raw

PATCH v2 5/7 ARM: OMAP2+: Simplify system timers definitions

In reply to Jon Hunter

There is a lot of redundancy in the definitions for the various system timers for OMAP2+ devices. For example, the omap3_am33xx_gptimer_timer_init() function is the same as the omap3_gp_gptimer_timer_init() function and the function omap4_sync32k_timer_init() can be re-used for OMAP5 devices. Therefore, consolidate the definitions to simplify the code.

---
 arch/arm/mach-omap2/board-cm-t3517.c |    2 +-
 arch/arm/mach-omap2/board-generic.c  |    2 +-
 arch/arm/mach-omap2/common.h         |    3 +--
 arch/arm/mach-omap2/timer.c          |   48 ++++++++++++++++++++--------------
 4 files changed, 31 insertions(+), 24 deletions(-)
arch/arm/mach-omap2/board-cm-t3517.c +1 -1
index 6a9529a..7c1ad68 100644
@@ -297,6 +297,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t3517_init,
 	.init_late	= am35xx_init_late,
-	.init_time	= omap3_gp_gptimer_timer_init,
+	.init_time	= omap3_gptimer_timer_init,
 	.restart	= omap3xxx_restart,
 MACHINE_END
arch/arm/mach-omap2/board-generic.c +1 -1
index 2590463..dfd9f48 100644
@@ -138,7 +138,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap3_am33xx_gptimer_timer_init,
+	.init_time	= omap3_gptimer_timer_init,
 	.dt_compat	= am33xx_boards_compat,
 MACHINE_END
 #endif
arch/arm/mach-omap2/common.h +1 -2
index b435027..594ab3b 100644
@@ -82,8 +82,7 @@ extern void omap2_init_common_infrastructure(void);
 extern void omap2_sync32k_timer_init(void);
 extern void omap3_sync32k_timer_init(void);
 extern void omap3_secure_sync32k_timer_init(void);
-extern void omap3_gp_gptimer_timer_init(void);
-extern void omap3_am33xx_gptimer_timer_init(void);
+extern void omap3_gptimer_timer_init(void);
 extern void omap4_local_timer_init(void);
 extern void omap5_realtime_timer_init(void);
 
arch/arm/mach-omap2/timer.c +28 -20

109 lines not on this page · raw message

Signature · 1 line
1.7.10.4
author
#8 lore raw

PATCH v2 6/7 ARM: OMAP2+: Store ID of system timers in timer structure

In reply to Jon Hunter

Currently, the timer ID is being passed to the function omap_dm_timer_init_one(). Instead of passing the ID separately, store it in the omap_dm_timer structure, that is also passed, and access the ID from this structure.

---
 arch/arm/mach-omap2/timer.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
arch/arm/mach-omap2/timer.c +6 -5
index 1b99b41..c5770ff 100644
@@ -210,7 +210,6 @@ static u32 __init omap_dm_timer_get_errata(void)
 }
 
 static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
-					 int gptimer_id,
 					 const char *fck_source,
 					 const char *property,
 					 const char **timer_name,
@@ -241,10 +240,10 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 
 		of_node_put(np);
 	} else {
-		if (omap_dm_timer_reserve_systimer(gptimer_id))
+		if (omap_dm_timer_reserve_systimer(timer->id))
 			return -ENODEV;
 
-		sprintf(name, "timer%d", gptimer_id);
+		sprintf(name, "timer%d", timer->id);
 		oh_name = name;
 	}
 
@@ -317,6 +316,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 {
 	int res;
 
+	clkev.id = gptimer_id;
 	clkev.errata = omap_dm_timer_get_errata();
 
 	/*
@@ -326,7 +326,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 	 */
 	__omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);
 
-	res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property,
+	res = omap_dm_timer_init_one(&clkev, fck_source, property,
 				     &clockevent_gpt.name, OMAP_TIMER_POSTED);
 	BUG_ON(res);
 
@@ -446,9 +446,10 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
 {
 	int res;
 
+	clksrc.id = gptimer_id;
 	clksrc.errata = omap_dm_timer_get_errata();
 
-	res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, property,
+	res = omap_dm_timer_init_one(&clksrc, fck_source, property,
 				     &clocksource_gpt.name,
 				     OMAP_TIMER_NONPOSTED);
 	BUG_ON(res);
Signature · 1 line
1.7.10.4
author
#9 lore raw

PATCH v2 7/7 ARM: OMAP4+: Fix sparse warning in system timers

In reply to Jon Hunter

Commit 6bb27d7 (ARM: delete struct sys_timer) changed the function created by the macro OMAP_SYS_32K_TIMER_INIT from static void to void. For OMAP4+ devices this created the following sparse warning ...

arch/arm/mach-omap2/timer.c:585:1: warning: symbol
'omap4_sync32k_timer_init' was not declared. Should it be static?

The function omap4_sync32k_timer_init() is not referenced outside of the file timer.c and so make this function static.

---
 arch/arm/mach-omap2/timer.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/mach-omap2/timer.c +2 -2
index c5770ff..a5f88b2 100644
@@ -587,8 +587,8 @@ OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
-OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
-			2, "sys_clkin_ck", NULL);
+static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
+			       2, "sys_clkin_ck", NULL);
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
Signature · 1 line
1.7.10.4
#4 lore raw

PATCH v2 3/7 ARM: OMAP2+: Remove hard-coded test on timer ID

In reply to Jon Hunter
Quoted 9 lines · Jon Hunter
arch/arm/mach-omap2/timer.c +0 -5
@@ -280,22 +281,22 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (IS_ERR(timer->fclk))
 		return -ENODEV;
 
-	/* FIXME: Need to remove hard-coded test on timer ID */
-	if (gptimer_id != 12) {
-		struct clk *src;
-
-		src = clk_get(NULL, fck_source);

arch/arm/mach-omap2/timer.c static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, · line 286

Quoted 10 lines
arch/arm/mach-omap2/timer.c +3 -7
-		if (IS_ERR(src)) {
-			r = -EINVAL;
-		} else {
-			r = clk_set_parent(timer->fclk, src);
-			if (IS_ERR_VALUE(r))
-				pr_warn("%s: %s cannot set source\n",
-					__func__, oh->name);
+	src = clk_get(NULL, fck_source);
+	if (IS_ERR(src))
+		return -EINVAL;

This should be:

		return PTR_ERR(src);

and should've been there previously...

author
#10 lore raw

v2 cover ARM: OMAP2+: System timer updates

In reply to Jon Hunter
Quoted 30 lines · Jon Hunter

This series consists mainly of clean-ups for clockevents and clocksource timers on OMAP2+ devices. The most significant change in functionality comes from the 5th patch which is changing the selection of the clocksource timer for OMAP3 and AM335x devices when gptimers are used for clocksource. This change came about from Vaibhav Bedia's series for AM335x [1]. See patch for more details on the exact nature of the change.

Boot tested with and without device-tree on OMAP2420 H4, OMAP3430 SDP, OMAP3430 Beagle Board, OMAP4430 SDP and AM335x EVM (AM335x only supports device-tree boot). Also boot tested boards with kernel boot parameter "clocksource=gp_timer".

This series is based upon ARM-SoC next branch.

V2 changes:
- Fixed bug in patch that updates clocksource and clockevents timer names to use the hwmod timer names (thanks Vaibhav Bedia!)
- Updated patch that removes the hard-coded ID test to return an error as soon as clk_set_parent fails instead of waiting for the end of the function.
- Fixed bug in patches that "simplify system timer clock definitions" and "simplify system timer definitions" that was prevent omap4/5 boards from booting with kernel boot parameter "clocksource=gp_timer".
- Updated changelog for patch "simplify system timer definitions" per feedback received from Igor.
- Added new patch to store the timer ID in the omap_dm_timer structure to clean-up the code.
- Added new patch to fix a sparse warning seen in ARM-SOC next.

Quoted 5 lines

[1] https://patchwork.kernel.org/patch/1921421/

Jon Hunter (7):
ARM: OMAP2+: Fix selection of clockevent timer when using device-tree

Ugh, sorry something got screwed up here. This was not meant to be included and I am missing another patch. Will resend this series.

Jon

author
#5 lore raw

PATCH v2 3/7 ARM: OMAP2+: Remove hard-coded test on timer ID

In reply to Russell King - ARM Linux
Quoted 22 lines · Russell King - ARM Linux
Quoted 9 lines · Jon Hunter
arch/arm/mach-omap2/timer.c +0 -5
@@ -280,22 +281,22 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (IS_ERR(timer->fclk))
 		return -ENODEV;
 
-	/* FIXME: Need to remove hard-coded test on timer ID */
-	if (gptimer_id != 12) {
-		struct clk *src;
-
-		src = clk_get(NULL, fck_source);

arch/arm/mach-omap2/timer.c static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, · line 286

Quoted 10 lines
arch/arm/mach-omap2/timer.c +3 -7
-		if (IS_ERR(src)) {
-			r = -EINVAL;
-		} else {
-			r = clk_set_parent(timer->fclk, src);
-			if (IS_ERR_VALUE(r))
-				pr_warn("%s: %s cannot set source\n",
-					__func__, oh->name);
+	src = clk_get(NULL, fck_source);
+	if (IS_ERR(src))
+		return -EINVAL;

This should be:

Quoted 3 lines
		return PTR_ERR(src);

and should've been there previously...

Thanks for the catch. I will include this and resend.

Cheers
Jon