regulator: twl: Convert fixed voltage to use regulator_list_voltage_linear
Subsystems (2)
PATCH 1/1 regulator: twl: Convert fixed voltage to use regulator_list_voltage_linear
Signed-off-by Axel Lin <[email protected]>
--- drivers/regulator/twl-regulator.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)
drivers/regulator/twl-regulator.c +3 -9
@@ -612,15 +612,8 @@ static struct regulator_ops twl6030ldo_ops = {/* * Fixed voltage LDOs don't have a VSEL field to update. */ -static int twlfixed_list_voltage (struct regulator_dev *rdev,unsigned index) -{ -struct twlreg_info *info =rdev_get_drvdata (rdev); - -return info->min_mV *1000 ; -} -static struct regulator_ops twl4030fixed_ops = { - .list_voltage = twlfixed_list_voltage, + .list_voltage = regulator_list_voltage_linear, .enable = twl4030reg_enable, .disable = twl4030reg_disable,
@@ -632,7 +625,7 @@ static struct regulator_ops twl4030fixed_ops = { };static struct regulator_ops twl6030fixed_ops = { - .list_voltage = twlfixed_list_voltage, + .list_voltage = regulator_list_voltage_linear, .enable = twl6030reg_enable, .disable = twl6030reg_disable,
@@ -935,6 +928,7 @@ static const struct twlreg_info TWLFIXED_INFO_##label = { \ .name = #label, \ .id = family##_REG_##label, \ .n_voltages = 1, \ + .min_uV = mVolts * 1000, \ .ops = &operations, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \
Signature · 1 line
1.7.9.5
Quoted 1 line · Axel Lin
Signed-off-by Axel Lin <[email protected]>
I didn't apply this as there was an earlier version sitting in my tree which for some reason had never been pushed out and merged. Sorry about that.