mfd: syscon: Removed unneeded field "dev" from private driver structure
Subsystems (2)
PATCH v6 1/2 mfd: syscon: Removed unneeded field "dev" from private driver structure
--- drivers/mfd/syscon.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/mfd/syscon.c +1 -4
@@ -25,17 +25,15 @@static struct platform_driver syscon_driver;struct syscon { -struct device *dev;void __iomem *base;struct regmap *regmap; };static int syscon_match (struct device *dev,void *data) { -struct syscon *syscon =dev_get_drvdata (dev);struct device_node *dn = data; -return (syscon->dev->of_node == dn) ?1 :0 ; +return (dev->of_node == dn) ?1 :0 ; }struct regmap *syscon_node_to_regmap (struct device_node *np)
@@ -130,7 +128,6 @@ static int syscon_probe(struct platform_device *pdev)return PTR_ERR (syscon->regmap); } - syscon->dev = dev;platform_set_drvdata (pdev, syscon); dev_info(dev, "syscon regmap start 0x%x end 0x%x registered\n",
Signature · 1 line
1.7.12.4
PATCH v6 2/2 mfd: syscon: Add non-DT support
This patch allow using syscon driver from the platform data, i.e. possibility using driver on systems without oftree support. For search syscon device from the client drivers, "syscon_regmap_lookup_by_pdevname" function was added.
--- drivers/mfd/Kconfig | 1 - drivers/mfd/syscon.c | 77 +++++++++++++++++++++++++++------------------- include/linux/mfd/syscon.h | 1 + 3 files changed, 47 insertions(+), 32 deletions(-)
drivers/mfd/Kconfig +0 -1
@@ -1070,7 +1070,6 @@ config MFD_STA2X11 config MFD_SYSCON bool "System Controller Register R/W Based on Regmap" - depends on OF select REGMAP_MMIO help Select this option to enable accessing system control registers
drivers/mfd/syscon.c +46 -31
125 lines not on this page · raw message
include/linux/mfd/syscon.h +1 -0
@@ -17,6 +17,7 @@extern struct regmap *syscon_node_to_regmap (struct device_node *np);extern struct regmap *syscon_regmap_lookup_by_compatible (const char *s); +extern struct regmap *syscon_regmap_lookup_by_pdevname (const char *s);extern struct regmap *syscon_regmap_lookup_by_phandle (struct device_node *np,const char *property);
Signature · 1 line
1.7.12.4
Re: [PATCH v6 2/2] mfd: syscon: Add non-DT support
Quoted 61 lines · Alexander Shiyan
This patch allow using syscon driver from the platform data, i.e. possibility using driver on systems without oftree support. For search syscon device from the client drivers, "
syscon_regmap_lookup_by_pdevname" function was added.Signed-off-by Alexander Shiyan <[email protected]>--- drivers/mfd/Kconfig | 1 - drivers/mfd/syscon.c | 77 +++++++++++++++++++++++++++------------------- include/linux/mfd/syscon.h | 1 + 3 files changed, 47 insertions(+), 32 deletions(-)drivers/mfd/Kconfig +0
-1@@ -1070,7 +1070,6 @@ config MFD_STA2X11 config MFD_SYSCON bool "System Controller Register R/W Based on Regmap" - depends on OF select REGMAP_MMIO help Select this option to enable accessing system control registersdrivers/mfd/syscon.c +13
-2@@ -29,7 +29,7 @@ struct syscon {struct regmap *regmap; }; -static int syscon_match (struct device *dev,void *data) +static int syscon_match_node (struct device *dev,void *data) {struct device_node *dn = data;@@ -42,7 +42,7 @@ struct regmap *syscon_node_to_regmap(struct device_node *np)struct device *dev; dev =driver_find_device (&syscon_driver.driver,NULL , np, - syscon_match); + syscon_match_node);if (!dev)return ERR_PTR (-EPROBE_DEFER );@@ -68,6 +68,34 @@ struct regmap *syscon_regmap_lookup_by_compatible(const char *s) }EXPORT_SYMBOL_GPL (syscon_regmap_lookup_by_compatible); +static int syscon_match_pdevname (struct device *dev,void *data) +{ +struct platform_device *pdev =to_platform_device (dev); +const struct platform_device_id *id =platform_get_device_id (pdev); + +if (id) +if (!strcmp (id->name, (const char *)data)) +return 1 ; + +return !strcmp (dev_name (dev), (const char *)data); +}
drivers/mfd/syscon.c struct regmap *syscon_regmap_lookup_by_compatible(const char *s) · line 91
Quoted 10 lines
drivers/mfd/syscon.c +10
-0+ +struct regmap *syscon_regmap_lookup_by_pdevname (const char *s) +{ +struct device *dev; +struct syscon *syscon; + + dev =driver_find_device (&syscon_driver.driver,NULL , (void *)s, + syscon_match_pdevname); +if (!dev) +return ERR_PTR (-ENODEV );
Should it be ERR_PTR(-EPROBE_DEFER)?
Quoted 38 lines
drivers/mfd/syscon.c +12
-13+ + syscon =dev_get_drvdata (dev); + +return syscon->regmap; +} +EXPORT_SYMBOL_GPL (syscon_regmap_lookup_by_pdevname); +struct regmap *syscon_regmap_lookup_by_phandle (struct device_node *np,const char *property) {@@ -99,30 +127,24 @@ static struct regmap_config syscon_regmap_config = {static int syscon_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev; -struct device_node *np = dev->of_node;struct syscon *syscon; -struct resource res; -int ret; - -if (!np) -return -ENOENT ; +struct resource *res; - syscon =devm_kzalloc (dev,sizeof (struct syscon ), -GFP_KERNEL ); + syscon =devm_kzalloc (dev,sizeof (struct syscon ),GFP_KERNEL );if (!syscon)return -ENOMEM ; - syscon->base =of_iomap (np,0 ); -if (!syscon->base) -return -EADDRNOTAVAIL ; + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!res) +return -ENOENT ; - ret =of_address_to_resource (np,0 , &res); -if (ret)
drivers/mfd/syscon.c static struct regmap_config syscon_regmap_config = { · line 147
Quoted 10 lines
drivers/mfd/syscon.c +5
-3-return ret; + syscon->base =devm_ioremap (dev, res->start,resource_size (res)); +if (!syscon->base) +return -ENOMEM ; - syscon_regmap_config.max_register = res.end - res.start -3 ; + syscon_regmap_config.max_register = res->end - res->start -3 ; syscon->regmap =devm_regmap_init_mmio (dev, syscon->base, - &syscon_regmap_config); + &syscon_regmap_config);
Unneeded change to me
drivers/mfd/syscon.c static int syscon_probe(struct platform_device *pdev) · line 155
Quoted 10 lines
drivers/mfd/syscon.c +1
-2if (IS_ERR (syscon->regmap)) {dev_err (dev,"regmap init failed\n" );return PTR_ERR (syscon->regmap);@@ -130,22 +152,15 @@ static int syscon_probe(struct platform_device *pdev)platform_set_drvdata (pdev, syscon); -dev_info (dev,"syscon regmap start 0x%x end 0x%x registered\n" , - res.start, res.end); +dev_info (dev,"regmap 0x%x-0x%x registered\n" , res->start, res->end);
Doesn't with a 'syscon' prefix look better?
Quoted 22 lines
drivers/mfd/syscon.c +4
-10return 0 ; } -static int syscon_remove (struct platform_device *pdev) -{ -struct syscon *syscon; - - syscon =platform_get_drvdata (pdev); -iounmap (syscon->base); -platform_set_drvdata (pdev,NULL ); - -return 0 ; -} +static const struct platform_device_id syscon_ids[] = { + {"syscon" , }, + { } +};static struct platform_driver syscon_driver = { .driver = {
drivers/mfd/syscon.c static struct platform_driver syscon_driver = { · line 157
Quoted 4 lines
drivers/mfd/syscon.c +0
-1@@ -154,7 +169,7 @@ static struct platform_driver syscon_driver = { .of_match_table = of_syscon_match, }, .probe = syscon_probe, - .remove = syscon_remove,
So you reply on the managed resource to address the resource leak issue raised by Dmitry on doing manually unbind here, right?
this looks ok to me.
So, besides above minor comments,
Regards
Dong Aisheng
Quoted 25 lines
drivers/mfd/syscon.c +1
-0+ .id_table = syscon_ids, };static int __init syscon_init (void )include/linux/mfd/syscon.h +1
-0@@ -17,6 +17,7 @@extern struct regmap *syscon_node_to_regmap (struct device_node *np);extern struct regmap *syscon_regmap_lookup_by_compatible (const char *s); +extern struct regmap *syscon_regmap_lookup_by_pdevname (const char *s);extern struct regmap *syscon_regmap_lookup_by_phandle (struct device_node *np,const char *property);Signature · 7 lines
1.7.12.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v6 2/2] mfd: syscon: Add non-DT support
Quoted 66 lines · Alexander Shiyan
Quoted 65 lines
This patch allow using syscon driver from the platform data, i.e. possibility using driver on systems without oftree support. For search syscon device from the client drivers, "
syscon_regmap_lookup_by_pdevname" function was added.Signed-off-by Alexander Shiyan <[email protected]>--- drivers/mfd/Kconfig | 1 - drivers/mfd/syscon.c | 77 +++++++++++++++++++++++++++------------------- include/linux/mfd/syscon.h | 1 + 3 files changed, 47 insertions(+), 32 deletions(-)drivers/mfd/Kconfig +0
-1@@ -1070,7 +1070,6 @@ config MFD_STA2X11 config MFD_SYSCON bool "System Controller Register R/W Based on Regmap" - depends on OF select REGMAP_MMIO help Select this option to enable accessing system control registersdrivers/mfd/syscon.c +17
-2@@ -29,7 +29,7 @@ struct syscon {struct regmap *regmap; }; -static int syscon_match (struct device *dev,void *data) +static int syscon_match_node (struct device *dev,void *data) {struct device_node *dn = data;@@ -42,7 +42,7 @@ struct regmap *syscon_node_to_regmap(struct device_node *np)struct device *dev; dev =driver_find_device (&syscon_driver.driver,NULL , np, - syscon_match); + syscon_match_node);if (!dev)return ERR_PTR (-EPROBE_DEFER );@@ -68,6 +68,34 @@ struct regmap *syscon_regmap_lookup_by_compatible(const char *s) }EXPORT_SYMBOL_GPL (syscon_regmap_lookup_by_compatible); +static int syscon_match_pdevname (struct device *dev,void *data) +{ +struct platform_device *pdev =to_platform_device (dev); +const struct platform_device_id *id =platform_get_device_id (pdev); + +if (id) +if (!strcmp (id->name, (const char *)data)) +return 1 ; + +return !strcmp (dev_name (dev), (const char *)data); +} + +struct regmap *syscon_regmap_lookup_by_pdevname (const char *s) +{ +struct device *dev;
Quoted 8 lines
drivers/mfd/syscon.c struct regmap *syscon_regmap_lookup_by_compatible(const char *s) · line 91
Quoted 6 lines
drivers/mfd/syscon.c +6
-0+struct syscon *syscon; + + dev =driver_find_device (&syscon_driver.driver,NULL , (void *)s, + syscon_match_pdevname); +if (!dev) +return ERR_PTR (-ENODEV );Should it be
ERR_PTR(-EPROBE_DEFER)?
I have no idea what better using here. Think that is not so important since we may have only one possible error code here.
Quoted 56 lines
Quoted 38 lines
drivers/mfd/syscon.c +12
-13+ + syscon =dev_get_drvdata (dev); + +return syscon->regmap; +} +EXPORT_SYMBOL_GPL (syscon_regmap_lookup_by_pdevname); +struct regmap *syscon_regmap_lookup_by_phandle (struct device_node *np,const char *property) {@@ -99,30 +127,24 @@ static struct regmap_config syscon_regmap_config = {static int syscon_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev; -struct device_node *np = dev->of_node;struct syscon *syscon; -struct resource res; -int ret; - -if (!np) -return -ENOENT ; +struct resource *res; - syscon =devm_kzalloc (dev,sizeof (struct syscon ), -GFP_KERNEL ); + syscon =devm_kzalloc (dev,sizeof (struct syscon ),GFP_KERNEL );if (!syscon)return -ENOMEM ; - syscon->base =of_iomap (np,0 ); -if (!syscon->base) -return -EADDRNOTAVAIL ; + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!res) +return -ENOENT ; - ret =of_address_to_resource (np,0 , &res); -if (ret)drivers/mfd/syscon.c static struct regmap_config syscon_regmap_config = { · line 147
Quoted 10 lines
drivers/mfd/syscon.c +5
-3-return ret; + syscon->base =devm_ioremap (dev, res->start,resource_size (res)); +if (!syscon->base) +return -ENOMEM ; - syscon_regmap_config.max_register = res.end - res.start -3 ; + syscon_regmap_config.max_register = res->end - res->start -3 ; syscon->regmap =devm_regmap_init_mmio (dev, syscon->base, - &syscon_regmap_config); + &syscon_regmap_config);Unneeded change to me
Quoted 5 lines
drivers/mfd/syscon.c +0
-0if (IS_ERR (syscon->regmap)) {dev_err (dev,"regmap init failed\n" );return PTR_ERR (syscon->regmap);@@ -130,22 +152,15 @@ static int syscon_probe(struct platform_device *pdev)
Quoted 7 lines
drivers/mfd/syscon.c static int syscon_probe(struct platform_device *pdev) · line 155
Quoted 5 lines
drivers/mfd/syscon.c +1
-2platform_set_drvdata (pdev, syscon); -dev_info (dev,"syscon regmap start 0x%x end 0x%x registered\n" , - res.start, res.end); +dev_info (dev,"regmap 0x%x-0x%x registered\n" , res->start, res->end);Doesn't with a 'syscon' prefix look better?
Prefix is added by dev_info, so no need to print it twice.
Quoted 19 lines
Quoted 19 lines
drivers/mfd/syscon.c +4
-10return 0 ; } -static int syscon_remove (struct platform_device *pdev) -{ -struct syscon *syscon; - - syscon =platform_get_drvdata (pdev); -iounmap (syscon->base); -platform_set_drvdata (pdev,NULL ); - -return 0 ; -} +static const struct platform_device_id syscon_ids[] = { + {"syscon" , }, + { } +};
Quoted 10 lines
drivers/mfd/syscon.c static struct platform_driver syscon_driver = { · line 157
Quoted 7 lines
drivers/mfd/syscon.c +0
-1static struct platform_driver syscon_driver = { .driver = {@@ -154,7 +169,7 @@ static struct platform_driver syscon_driver = { .of_match_table = of_syscon_match, }, .probe = syscon_probe, - .remove = syscon_remove,So you reply on the managed resource to address the resource leak issue raised by Dmitry on doing manually unbind here, right?
Yes. We are killing "remove"-entry since all our resources are "managed" now.
Quoted 18 lines
this looks ok to me.
So, besides above minor comments,
Acked-by Dong Aisheng <[email protected]>Regards
Dong AishengQuoted 10 lines
drivers/mfd/syscon.c +1
-0+ .id_table = syscon_ids, };static int __init syscon_init (void )include/linux/mfd/syscon.h +0
-0@@ -17,6 +17,7 @@
Quoted 8 lines
Quoted 8 lines
include/linux/mfd/syscon.h +1
-0extern struct regmap *syscon_node_to_regmap (struct device_node *np);extern struct regmap *syscon_regmap_lookup_by_compatible (const char *s); +extern struct regmap *syscon_regmap_lookup_by_pdevname (const char *s);extern struct regmap *syscon_regmap_lookup_by_phandle (struct device_node *np,const char *property);Signature · 1 line
1.7.12.4
---
���{.n�+�������+%�����ݶ��w��{.n�+����{��G�����{ay�ʇڙ�,j��f���h��������z_�(�階�ݢj"���m������G������?����&���~��iO��z��v�^�m����������?�I�
Re: [PATCH v6 2/2] mfd: syscon: Add non-DT support
Quoted 75 lines · Alexander Shiyan
Quoted 66 lines · Alexander Shiyan
Quoted 65 lines
This patch allow using syscon driver from the platform data, i.e. possibility using driver on systems without oftree support. For search syscon device from the client drivers, "
syscon_regmap_lookup_by_pdevname" function was added.Signed-off-by Alexander Shiyan <[email protected]>--- drivers/mfd/Kconfig | 1 - drivers/mfd/syscon.c | 77 +++++++++++++++++++++++++++------------------- include/linux/mfd/syscon.h | 1 + 3 files changed, 47 insertions(+), 32 deletions(-)drivers/mfd/Kconfig +0
-1@@ -1070,7 +1070,6 @@ config MFD_STA2X11 config MFD_SYSCON bool "System Controller Register R/W Based on Regmap" - depends on OF select REGMAP_MMIO help Select this option to enable accessing system control registersdrivers/mfd/syscon.c +17
-2@@ -29,7 +29,7 @@ struct syscon {struct regmap *regmap; }; -static int syscon_match (struct device *dev,void *data) +static int syscon_match_node (struct device *dev,void *data) {struct device_node *dn = data;@@ -42,7 +42,7 @@ struct regmap *syscon_node_to_regmap(struct device_node *np)struct device *dev; dev =driver_find_device (&syscon_driver.driver,NULL , np, - syscon_match); + syscon_match_node);if (!dev)return ERR_PTR (-EPROBE_DEFER );@@ -68,6 +68,34 @@ struct regmap *syscon_regmap_lookup_by_compatible(const char *s) }EXPORT_SYMBOL_GPL (syscon_regmap_lookup_by_compatible); +static int syscon_match_pdevname (struct device *dev,void *data) +{ +struct platform_device *pdev =to_platform_device (dev); +const struct platform_device_id *id =platform_get_device_id (pdev); + +if (id) +if (!strcmp (id->name, (const char *)data)) +return 1 ; + +return !strcmp (dev_name (dev), (const char *)data); +} + +struct regmap *syscon_regmap_lookup_by_pdevname (const char *s) +{ +struct device *dev;Quoted 8 lines
drivers/mfd/syscon.c struct regmap *syscon_regmap_lookup_by_compatible(const char *s) · line 91
Quoted 6 lines
drivers/mfd/syscon.c +6
-0+struct syscon *syscon; + + dev =driver_find_device (&syscon_driver.driver,NULL , (void *)s, + syscon_match_pdevname); +if (!dev) +return ERR_PTR (-ENODEV );Should it be
ERR_PTR(-EPROBE_DEFER)?
Quoted 2 lines
I have no idea what better using here. Think that is not so important since we may have only one possible error code here.
I'm not quite understand your meaning.
Since the syscon device may be still not registered, so it may be better to return a EPROBE_DERFER which is the same as dt version.
Quoted 59 lines
Quoted 59 lines
Quoted 39 lines
drivers/mfd/syscon.c +12
-13+ + syscon =dev_get_drvdata (dev); + +return syscon->regmap; +} +EXPORT_SYMBOL_GPL (syscon_regmap_lookup_by_pdevname); +struct regmap *syscon_regmap_lookup_by_phandle (struct device_node *np,const char *property) {@@ -99,30 +127,24 @@ static struct regmap_config syscon_regmap_config = {static int syscon_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev; -struct device_node *np = dev->of_node;struct syscon *syscon; -struct resource res; -int ret; - -if (!np) -return -ENOENT ; +struct resource *res; - syscon =devm_kzalloc (dev,sizeof (struct syscon ), -GFP_KERNEL ); + syscon =devm_kzalloc (dev,sizeof (struct syscon ),GFP_KERNEL );if (!syscon)return -ENOMEM ; - syscon->base =of_iomap (np,0 ); -if (!syscon->base) -return -EADDRNOTAVAIL ; + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!res) +return -ENOENT ; - ret =of_address_to_resource (np,0 , &res); -if (ret)drivers/mfd/syscon.c static struct regmap_config syscon_regmap_config = { · line 147
Quoted 10 lines
drivers/mfd/syscon.c +5
-3-return ret; + syscon->base =devm_ioremap (dev, res->start,resource_size (res)); +if (!syscon->base) +return -ENOMEM ; - syscon_regmap_config.max_register = res.end - res.start -3 ; + syscon_regmap_config.max_register = res->end - res->start -3 ; syscon->regmap =devm_regmap_init_mmio (dev, syscon->base, - &syscon_regmap_config); + &syscon_regmap_config);Unneeded change to me
Quoted 7 lines
drivers/mfd/syscon.c +0
-0if (IS_ERR (syscon->regmap)) {dev_err (dev,"regmap init failed\n" );return PTR_ERR (syscon->regmap);@@ -130,22 +152,15 @@ static int syscon_probe(struct platform_device *pdev)platform_set_drvdata (pdev, syscon);
Quoted 7 lines
Quoted 5 lines
drivers/mfd/syscon.c static int syscon_probe(struct platform_device *pdev) · line 155
Quoted 3 lines
drivers/mfd/syscon.c +1
-2-dev_info (dev,"syscon regmap start 0x%x end 0x%x registered\n" , - res.start, res.end); +dev_info (dev,"regmap 0x%x-0x%x registered\n" , res->start, res->end);Doesn't with a 'syscon' prefix look better?
Prefix is added by
dev_info, so no need to print it twice.
Reasonable to me.
Regards
Dong Aisheng
Quoted 60 lines
Quoted 19 lines
Quoted 19 lines
drivers/mfd/syscon.c +4
-10return 0 ; } -static int syscon_remove (struct platform_device *pdev) -{ -struct syscon *syscon; - - syscon =platform_get_drvdata (pdev); -iounmap (syscon->base); -platform_set_drvdata (pdev,NULL ); - -return 0 ; -} +static const struct platform_device_id syscon_ids[] = { + {"syscon" , }, + { } +};Quoted 10 lines
drivers/mfd/syscon.c static struct platform_driver syscon_driver = { · line 157
Quoted 7 lines
drivers/mfd/syscon.c +0
-1static struct platform_driver syscon_driver = { .driver = {@@ -154,7 +169,7 @@ static struct platform_driver syscon_driver = { .of_match_table = of_syscon_match, }, .probe = syscon_probe, - .remove = syscon_remove,So you reply on the managed resource to address the resource leak issue raised by Dmitry on doing manually unbind here, right?
Yes. We are killing "remove"-entry since all our resources are "managed" now.
Quoted 18 lines
this looks ok to me.
So, besides above minor comments,
Acked-by Dong Aisheng <[email protected]>Regards
Dong AishengQuoted 10 lines
drivers/mfd/syscon.c +1
-0+ .id_table = syscon_ids, };static int __init syscon_init (void )include/linux/mfd/syscon.h +0
-0@@ -17,6 +17,7 @@Quoted 8 lines
Quoted 8 lines
include/linux/mfd/syscon.h +1
-0extern struct regmap *syscon_node_to_regmap (struct device_node *np);extern struct regmap *syscon_regmap_lookup_by_compatible (const char *s); +extern struct regmap *syscon_regmap_lookup_by_pdevname (const char *s);extern struct regmap *syscon_regmap_lookup_by_phandle (struct device_node *np,const char *property);Signature · 1 line
1.7.12.4---
Arnd Bergmann
maintainerRe: [PATCH v6 2/2] mfd: syscon: Add non-DT support
Quoted 7 lines · Dong Aisheng
Quoted 7 lines
Quoted 6 lines
drivers/mfd/syscon.c struct regmap *syscon_regmap_lookup_by_compatible(const char *s) · line 91
Quoted 4 lines
+ dev = driver_find_device(&syscon_driver.driver, NULL, (void *)s,
drivers/mfd/syscon.c +3
-0+ syscon_match_pdevname); +if (!dev) +return ERR_PTR (-ENODEV );Should it be
ERR_PTR(-EPROBE_DEFER)?
Quoted 7 lines
Quoted 2 lines
I have no idea what better using here. Think that is not so important since we may have only one possible error code here.
I'm not quite understand your meaning.
Since the syscon device may be still not registered, so it may be better to return aEPROBE_DERFERwhich is the same as dt version.
I'm guessing that Alexander has not encountered deferred probing yet. Alexander, the point here is that returning -EPROBE_DEFER has the advantage that a probe() callback calling this function can simply return that error code to the driver core. If the driver core sees -EPROBE_DEFER, it will retry the same probe function later, after all other device probe functions have been called and at least one of them was successful. This way you can load the syscon driver after loading a driver depending on it and everything will still work.
Arnd
Re[2]: [PATCH v6 2/2] mfd: syscon: Add non-DT support
Quoted 16 lines · Dong Aisheng
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
drivers/mfd/syscon.c struct regmap *syscon_regmap_lookup_by_compatible(const char *s) · line 91
Quoted 4 lines
+ dev = driver_find_device(&syscon_driver.driver, NULL, (void *)s,
drivers/mfd/syscon.c +3
-0+ syscon_match_pdevname); +if (!dev) +return ERR_PTR (-ENODEV );Should it be
ERR_PTR(-EPROBE_DEFER)?Quoted 7 lines
Quoted 2 lines
I have no idea what better using here. Think that is not so important since we may have only one possible error code here.
I'm not quite understand your meaning.
Since the syscon device may be still not registered, so it may be better to return aEPROBE_DERFERwhich is the same as dt version.
Quoted 9 lines
I'm guessing that Alexander has not encountered deferred probing yet. Alexander, the point here is that returning -EPROBE_DEFER has the advantage that a
probe()callback calling this function can simply return that error code to the driver core. If the driver core sees -EPROBE_DEFER, it will retry the same probe function later, after all other device probe functions have been called and at least one of them was successful. This way you can load the syscon driver after loading a driver depending on it and everything will still work.
You are right Arnd. I usually try to control the correct order of loading drivers. Using EPROBE_DEFER in this procedure is more correct. Probably time for v7... I hope it will finally be the last.
---
���{.n�+�������+%�����ݶ��w��{.n�+����{��G�����{ay�ʇڙ�,j��f���h��������z_�(�階�ݢj"���m������G������?����&���~��iO��z��v�^�m����������?�I�
Quoted 38 lines
Signed-off-by Alexander Shiyan <[email protected]>--- drivers/mfd/syscon.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)drivers/mfd/syscon.c +1
-4@@ -25,17 +25,15 @@static struct platform_driver syscon_driver;struct syscon { -struct device *dev;void __iomem *base;struct regmap *regmap; };static int syscon_match (struct device *dev,void *data) { -struct syscon *syscon =dev_get_drvdata (dev);struct device_node *dn = data; -return (syscon->dev->of_node == dn) ?1 :0 ; +return (dev->of_node == dn) ?1 :0 ; }struct regmap *syscon_node_to_regmap (struct device_node *np)@@ -130,7 +128,6 @@ static int syscon_probe(struct platform_device *pdev)return PTR_ERR (syscon->regmap); } - syscon->dev = dev;platform_set_drvdata (pdev, syscon); dev_info(dev, "syscon regmap start 0x%x end 0x%x registered\n",Signature · 1 line
1.7.12.4
ping
---
���{.n�+�������+%�����ݶ��w��{.n�+����{��G�����{ay�ʇڙ�,j��f���h��������z_�(�階�ݢj"���m������G������?����&���~��iO��z��v�^�m����������?�I�
Quoted 2 lines · Alexander Shiyan
Signed-off-by Alexander Shiyan <[email protected]>
Regards
Dong Aisheng