mei: revamp mei_data2slots
Subsystems (2)
PATCH 1/2 mei: revamp mei_data2slots
1. Move the mei_data2slots to mei_dev.h as it will be used by the all supported HW.
2. Change return value from u8 to u32 to catch possible overflows
3. Eliminate computing the slots number twice in the same function
Signed-off-by Tomas Winkler <[email protected]>
--- drivers/misc/mei/amthif.c | 11 +++++----- drivers/misc/mei/hw-me.c | 3 ++- drivers/misc/mei/hw-me.h | 6 ------ drivers/misc/mei/interrupt.c | 50 +++++++++++++++++++++++++------------------- drivers/misc/mei/mei_dev.h | 11 ++++++++++ 5 files changed, 47 insertions(+), 34 deletions(-)
drivers/misc/mei/amthif.c +6 -5
@@ -449,7 +449,7 @@ int mei_amthif_irq_write_complete(struct mei_device *dev, s32 *slots,struct mei_msg_hdr mei_hdr;struct mei_cl *cl = cb->cl;size_t len = dev->iamthif_msg_buf_size - dev->iamthif_msg_buf_index; -size_t msg_slots =mei_data2slots (len); +u32 msg_slots =mei_data2slots (len); mei_hdr.host_addr = cl->host_client_id; mei_hdr.me_addr = cl->me_client_id;
@@ -566,12 +566,13 @@ int mei_amthif_irq_read_message(struct mei_cl_cb *complete_list,*/ int mei_amthif_irq_read (struct mei_device *dev,s32 *slots) { +u32 msg_slots =mei_data2slots (sizeof (struct hbm_flow_control )); -if (((*slots) *sizeof (u32)) < (sizeof (struct mei_msg_hdr ) - +sizeof (struct hbm_flow_control ))) { +if (*slots < msg_slots)return -EMSGSIZE ; - } - *slots -=mei_data2slots (sizeof (struct hbm_flow_control )); + + *slots -= msg_slots; +if (mei_hbm_cl_flow_control_req (dev, &dev->iamthif_cl)) {dev_dbg (&dev->pdev->dev,"iamthif flow control failed\n" );return -EIO ;
drivers/misc/mei/hw-me.c +2 -1
@@ -305,10 +305,11 @@ static int mei_me_write_message(struct mei_device *dev, unsigned char *buf) {struct mei_me_hw *hw =to_me_hw (dev); -unsigned long rem, dw_cnt; +unsigned long rem;unsigned long length = header->length;u32 *reg_buf = (u32 *)buf;u32 hcsr; +u32 dw_cnt;int i;int empty_slots;
drivers/misc/mei/hw-me.h +0 -6
@@ -36,12 +36,6 @@ struct mei_me_hw {struct mei_device *mei_me_dev_init (struct pci_dev *pdev); -/* get slots (dwords) from a message length + header (bytes) */ -static inline unsigned char mei_data2slots (size_t length) -{ -return DIV_ROUND_UP (sizeof (struct mei_msg_hdr ) + length,4 ); -} -irqreturn_t mei_me_irq_quick_handler (int irq,void *dev_id);irqreturn_t mei_me_irq_thread_handler (int irq,void *dev_id);
drivers/misc/mei/interrupt.c +28 -22
97 lines not on this page · raw message
drivers/misc/mei/mei_dev.h +11 -0
@@ -374,6 +374,17 @@ static inline unsigned long mei_secs_to_jiffies(unsigned long sec)return msecs_to_jiffies (sec *MSEC_PER_SEC ); } +/** +* mei_data2slots - get slots - number of (dwords) from a message length +* + size of the mei header +* @length - size of the messages in bytes +* returns - number of slots +*/ +static inline u32 mei_data2slots (size_t length) +{ +return DIV_ROUND_UP (sizeof (struct mei_msg_hdr ) + length,4 ); +} +/* * mei init function prototypes
Signature · 1 line
1.8.1.3
PATCH 2/2 mei: add hw start callback
This callback wraps up hardware dependent details of the hardware initialization.
This callback also contains host ready setting so we can remove host_set_ready callback
In ME we switch to waiting on event so
we can streamline the initialization flow.
Signed-off-by Tomas Winkler <[email protected]>
--- drivers/misc/mei/hw-me.c | 45 ++++++++++++++++++++++++++++++++++++--------- drivers/misc/mei/init.c | 16 ++++++++++++++++ drivers/misc/mei/mei_dev.h | 16 ++++++++++------ 3 files changed, 62 insertions(+), 15 deletions(-)
drivers/misc/mei/hw-me.c +36 -9
@@ -232,6 +232,38 @@ static bool mei_me_hw_is_ready(struct mei_device *dev)return (hw->me_hw_state &ME_RDY_HRA ) ==ME_RDY_HRA ; } +static int mei_me_hw_ready_wait (struct mei_device *dev) +{ +int err; +if (mei_me_hw_is_ready (dev)) +return 0 ; + +mutex_unlock (&dev->device_lock); + err =wait_event_interruptible_timeout (dev->wait_hw_ready, + dev->recvd_hw_ready,MEI_INTEROP_TIMEOUT ); +mutex_lock (&dev->device_lock); +if (!err && !dev->recvd_hw_ready) { +dev_err (&dev->pdev->dev, +"wait hw ready failed. status = 0x%x\n" , err); +return -ETIMEDOUT ; + } + + dev->recvd_hw_ready = false; +return 0 ; +} + +static int mei_me_hw_start (struct mei_device *dev) +{ +int ret =mei_me_hw_ready_wait (dev); +if (ret) +return ret; +dev_dbg (&dev->pdev->dev,"hw is ready\n" ); + +mei_me_host_set_ready (dev); +return ret; +} + +/** * mei_hbuf_filled_slots - gets number of device filled buffer slots *
@@ -466,14 +498,9 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)if (mei_hw_is_ready (dev)) {dev_dbg (&dev->pdev->dev,"we need to start the dev.\n" ); -mei_host_set_ready (dev); - -dev_dbg (&dev->pdev->dev,"link is established start sending messages.\n" ); -/* link is established * start sending messages. */ - - dev->dev_state =MEI_DEV_INIT_CLIENTS ; + dev->recvd_hw_ready = true; +wake_up_interruptible (&dev->wait_hw_ready); -mei_hbm_start_req (dev);mutex_unlock (&dev->device_lock);return IRQ_HANDLED ; }else {
@@ -532,12 +559,12 @@ end: }static const struct mei_hw_ops mei_me_hw_ops = { - .host_set_ready = mei_me_host_set_ready, .host_is_ready = mei_me_host_is_ready, .hw_is_ready = mei_me_hw_is_ready, .hw_reset = mei_me_hw_reset, - .hw_config = mei_me_hw_config, + .hw_config = mei_me_hw_config, + .hw_start = mei_me_hw_start, .intr_clear = mei_me_intr_clear, .intr_enable = mei_me_intr_enable,
drivers/misc/mei/init.c +16 -0
@@ -22,6 +22,7 @@#include <linux/mei.h> #include "mei_dev.h" +#include "hbm.h" #include "client.h" const char *mei_dev_state_str (int state)
@@ -47,6 +48,7 @@ void mei_device_init(struct mei_device *dev)/* setup our list array */ INIT_LIST_HEAD (&dev->file_list);mutex_init (&dev->device_lock); +init_waitqueue_head (&dev->wait_hw_ready);init_waitqueue_head (&dev->wait_recvd_msg);init_waitqueue_head (&dev->wait_stop_wd); dev->dev_state =MEI_DEV_INITIALIZING ;
@@ -176,6 +178,20 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled)dev_warn (&dev->pdev->dev,"unexpected reset: dev_state = %s\n" ,mei_dev_state_str (dev->dev_state)); +if (!interrupts_enabled) { +dev_dbg (&dev->pdev->dev,"intr not enabled end of reset\n" ); +return ; + } + +mei_hw_start (dev); + +dev_dbg (&dev->pdev->dev,"link is established start sending messages.\n" ); +/* link is established * start sending messages. */ + + dev->dev_state =MEI_DEV_INIT_CLIENTS ; + +mei_hbm_start_req (dev); +/* wake up all readings so they can be interrupted */ mei_cl_all_read_wakeup (dev);
drivers/misc/mei/mei_dev.h +10 -6
@@ -213,11 +213,11 @@ struct mei_cl {/** struct mei_hw_ops * -* @host_set_ready - notify FW that host side is ready * @host_is_ready - query for host readiness * @hw_is_ready - query if hw is ready * @hw_reset - reset hw +* @hw_start - start hw after reset * @hw_config - configure hw * @intr_clear - clear pending interrupts
@@ -237,11 +237,11 @@ struct mei_cl {*/ struct mei_hw_ops { -void (*host_set_ready) (struct mei_device *dev);bool (*host_is_ready) (struct mei_device *dev);bool (*hw_is_ready) (struct mei_device *dev);void (*hw_reset) (struct mei_device *dev,bool enable); +int (*hw_start) (struct mei_device *dev);void (*hw_config) (struct mei_device *dev);void (*intr_clear) (struct mei_device *dev);
@@ -296,11 +296,14 @@ struct mei_device {*/ struct mutex device_lock;/* device lock */ struct delayed_work timer_work;/* MEI timer delayed work (timeouts) */ + +bool recvd_hw_ready;bool recvd_msg;/* * waiting queue for receive message from FW */ +wait_queue_head_t wait_hw_ready;wait_queue_head_t wait_recvd_msg;wait_queue_head_t wait_stop_wd;
@@ -466,6 +469,11 @@ static inline void mei_hw_reset(struct mei_device *dev, bool enable) dev->ops->hw_reset (dev, enable); } +static inline void mei_hw_start (struct mei_device *dev) +{ + dev->ops->hw_start (dev); +} +static inline void mei_clear_interrupts (struct mei_device *dev) { dev->ops->intr_clear (dev);
@@ -481,10 +489,6 @@ static inline void mei_disable_interrupts(struct mei_device *dev) dev->ops->intr_disable (dev); } -static inline void mei_host_set_ready (struct mei_device *dev) -{ - dev->ops->host_set_ready (dev); -}static inline bool mei_host_is_ready (struct mei_device *dev) {return dev->ops->host_is_ready (dev);
Signature · 1 line
1.8.1.3