Skip to contentSkip to conversation

hwmon: (tmp401) Add support for TMP431

PATCH Superseded Guenter Roeck 2 participants 3 messages Mar 23, 2013 – Mar 25, 2013

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Guenter Roeck

author maintainer
#0 lore raw

PATCH 1/1 hwmon: (tmp401) Add support for TMP431

TMP431 is compatible to TMP401.

Also add support for additional I2C addresses supported by TMP411B and TMP411C.

---
 Documentation/hwmon/tmp401 |   16 ++++++++++------
 drivers/hwmon/Kconfig      |    4 ++--
 drivers/hwmon/tmp401.c     |   11 ++++++++---
 3 files changed, 20 insertions(+), 11 deletions(-)
Documentation/hwmon/tmp401 +10 -6
index 9fc4472..12e4781 100644
@@ -8,8 +8,12 @@ Supported chips:
     Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp401.html
   * Texas Instruments TMP411
     Prefix: 'tmp411'
-    Addresses scanned: I2C 0x4c
+    Addresses scanned: I2C 0x4c, 0x4d, 0x4e
     Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp411.html
+  * Texas Instruments TMP431
+    Prefix: 'tmp431'
+    Addresses scanned: I2C 0x4c, 0x4d
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp431.html
 
 Authors:
          Hans de Goede <[email protected]>
@@ -18,8 +22,8 @@ Authors:
 Description
 -----------
 
-This driver implements support for Texas Instruments TMP401 and
-TMP411 chips. These chips implements one remote and one local
+This driver implements support for Texas Instruments TMP401, TMP411,
+and TMP431 chips. These chips implement one remote and one local
 temperature sensor. Temperature is measured in degrees
 Celsius. Resolution of the remote sensor is 0.0625 degree. Local
 sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
@@ -27,10 +31,10 @@ supported by the driver so far, so using the default resolution of 0.5
 degree).
 
 The driver provides the common sysfs-interface for temperatures (see
-/Documentation/hwmon/sysfs-interface under Temperatures).
+Documentation/hwmon/sysfs-interface under Temperatures).
 
-The TMP411 chip is compatible with TMP401. It provides some additional
-features.
+The TMP411 and TMP431 chips are compatible with TMP401. TMP411 provides
+some additional features.
 
 * Minimum and Maximum temperature measured since power-on, chip-reset
 
drivers/hwmon/Kconfig +2 -2
index 89ac1cb..30351de 100644
@@ -1204,8 +1204,8 @@ config SENSORS_TMP401
 	tristate "Texas Instruments TMP401 and compatibles"
 	depends on I2C
 	help
-	  If you say yes here you get support for Texas Instruments TMP401 and
-	  TMP411 temperature sensor chips.
+	  If you say yes here you get support for Texas Instruments TMP401,
+	  TMP411, and TMP431 temperature sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called tmp401.
drivers/hwmon/tmp401.c +8 -3
index c85f696..763115a 100644
@@ -40,9 +40,9 @@
 #include <linux/sysfs.h>
 
 /* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
 
-enum chips { tmp401, tmp411 };
+enum chips { tmp401, tmp411, tmp431 };
 
 /*
  * The TMP401 registers, note some registers have different addresses for
@@ -90,6 +90,7 @@ static const u8 TMP411_TEMP_HIGHEST_LSB[2]		= { 0x33, 0x37 };
 #define TMP401_MANUFACTURER_ID			0x55
 #define TMP401_DEVICE_ID			0x11
 #define TMP411_DEVICE_ID			0x12
+#define TMP431_DEVICE_ID			0x31
 
 /*
  * Driver data (common to all clients)
@@ -98,6 +99,7 @@ static const u8 TMP411_TEMP_HIGHEST_LSB[2]		= { 0x33, 0x37 };
 static const struct i2c_device_id tmp401_id[] = {
 	{ "tmp401", tmp401 },
 	{ "tmp411", tmp411 },
+	{ "tmp431", tmp431 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, tmp401_id);
@@ -559,6 +561,9 @@ static int tmp401_detect(struct i2c_client *client,
 	case TMP411_DEVICE_ID:
 		kind = tmp411;
 		break;
+	case TMP431_DEVICE_ID:
+		kind = tmp431;
+		break;
 	default:
 		return -ENODEV;
 	}
@@ -602,7 +607,7 @@ static int tmp401_probe(struct i2c_client *client,
 {
 	int i, err = 0;
 	struct tmp401_data *data;
-	const char *names[] = { "TMP401", "TMP411" };
+	const char *names[] = { "TMP401", "TMP411", "TMP431" };
 
 	data = devm_kzalloc(&client->dev, sizeof(struct tmp401_data),
 			    GFP_KERNEL);
Signature · 7 lines
1.7.9.7


_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Acked-by on v1 1/1
#1 lore raw

Hi Guenter,

Quoted 17 lines · Guenter Roeck

TMP431 is compatible to TMP401.

Also add support for additional I2C addresses supported by TMP411B and TMP411C.

---
 Documentation/hwmon/tmp401 |   16 ++++++++++------
 drivers/hwmon/Kconfig      |    4 ++--
 drivers/hwmon/tmp401.c     |   11 ++++++++---
 3 files changed, 20 insertions(+), 11 deletions(-)

(...)

drivers/hwmon/tmp401.c +0 -0
index c85f696..763115a 100644

drivers/hwmon/tmp401.c line 43

Quoted 5 lines
drivers/hwmon/tmp401.c +1 -1
@@ -40,9 +40,9 @@
 #include <linux/sysfs.h>
 
 /* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };

Without address checks in the detect function, you are accepting all supported chips at all of these addresses. Some combinations are not possible, so I think you should reject them in order to make false positives less likely.

Other than this, it looks good.

Don't forget to update sensors-detect to map the TMP431 chip to the tmp401 driver.

Signature · 6 lines
Jean Delvare

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
author maintainer
#2 lore raw
In reply to Guenter Roeck
Quoted 22 lines · Jean Delvare

Hi Guenter,

Quoted 19 lines · Guenter Roeck

TMP431 is compatible to TMP401.

Also add support for additional I2C addresses supported by TMP411B and TMP411C.

---
 Documentation/hwmon/tmp401 |   16 ++++++++++------
 drivers/hwmon/Kconfig      |    4 ++--
 drivers/hwmon/tmp401.c     |   11 ++++++++---
 3 files changed, 20 insertions(+), 11 deletions(-)

(...)

drivers/hwmon/tmp401.c +0 -0
index c85f696..763115a 100644
@@ -40,9 +40,9 @@
 #include <linux/sysfs.h>
 
Quoted 9 lines

drivers/hwmon/tmp401.c line 43

Quoted 3 lines
drivers/hwmon/tmp401.c +1 -1
 /* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };

Without address checks in the detect function, you are accepting all supported chips at all of these addresses. Some combinations are not possible, so I think you should reject them in order to make false positives less likely.

Ok, I'll update the patch to do that.

Quoted 4 lines

Other than this, it looks good.

Thanks,
Guenter

Quoted 6 lines

Don't forget to update sensors-detect to map the TMP431 chip to the tmp401 driver.

Signature · 1 line
Jean Delvare

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors