firewire: Fix 'failed to read phy reg' on FW643 rev8
PATCH 1/1 firewire: Fix 'failed to read phy reg' on FW643 rev8
With the LSI FW643 rev 8 [1], the first commanded bus reset at the conclusion of ohci_enable() has been observed to fail with the following messages:
[ 4.884015] firewire_ohci 0000:01:00.0: failed to read phy reg .... [ 5.684012] firewire_ohci 0000:01:00.0: failed to read phy reg
With drivers/firewire/ohci.c instrumented, the error condition [2] indicates the PHY arbitration state machine has timed out prior to enabling PHY LCtrl.
Clear the PHY arbitration timeout condition prior to enabling LCtrl.
NB: The problem appears to be timing-related as well, since clearing the timeout status before configure_1394a_enhancements() has no effect.
[1] lspci -v
01:00.0 FireWire (IEEE 1394): LSI Corporation FW643 [TrueFire] PCIe 1394b Controller (rev 08) (prog-if 10 [OHCI])
Subsystem: LSI Corporation FW643 [TrueFire] PCIe 1394b Controller
Flags: bus master, fast devsel, latency 0, IRQ 92
Memory at fbeff000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 3
Capabilities: [4c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [60] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [170] Device Serial Number 08-14-43-82-00-00-41-fc
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
[2] instrumented WARNING in read_phy_reg()
[ 4.576010] ------------[ cut here ]------------ [ 4.576035] WARNING: at ./drivers/firewire/ohci.c:570 read_phy_reg+0x93/0xe0 [firewire_ohci]() [ 4.576050] Hardware name: Precision WorkStation T5400 [ 4.576058] failed to read phy reg:1 (phy(5) @ config enhance:19) [ 4.576068] Modules linked in: hid_logitech_dj hid_generic(+) usbhid <...snip...> [ 4.576140] Pid: 61, comm: kworker/2:1 Not tainted 3.8.0-2+fwtest-xeon #2+fwtest [ 4.576149] Call Trace: [ 4.576160] [<ffffffff8105468f>] warn_slowpath_common+0x7f/0xc0 [ 4.576168] [<ffffffff81054786>] warn_slowpath_fmt+0x46/0x50 [ 4.576178] [<ffffffffa00caca3>] read_phy_reg+0x93/0xe0 [firewire_ohci] [ 4.576188] [<ffffffffa00cae19>] ohci_read_phy_reg+0x39/0x60 [firewire_ohci] [ 4.576203] [<ffffffffa00731ff>] fw_send_phy_config+0xbf/0xe0 [firewire_core] [ 4.576214] [<ffffffffa006b2d6>] br_work+0x46/0xb0 [firewire_core] [ 4.576225] [<ffffffff81071e0c>] process_one_work+0x13c/0x500 [ 4.576238] [<ffffffffa006b290>] ? fw_card_initialize+0x180/0x180 [firewire_core] [ 4.576248] [<ffffffff810737ed>] worker_thread+0x16d/0x470 [ 4.576257] [<ffffffff81073680>] ? busy_worker_rebind_fn+0x100/0x100 [ 4.576266] [<ffffffff8107d160>] kthread+0xc0/0xd0 [ 4.576275] [<ffffffff816a0000>] ? pcpu_dump_alloc_info+0x1cb/0x2c4 [ 4.576284] [<ffffffff8107d0a0>] ? kthread_create_on_node+0x130/0x130 [ 4.576297] [<ffffffff816b2f6c>] ret_from_fork+0x7c/0xb0 [ 4.576305] [<ffffffff8107d0a0>] ? kthread_create_on_node+0x130/0x130 [ 4.576313] ---[ end trace cbc940994b300302 ]---
--- drivers/firewire/core.h | 1 + drivers/firewire/ohci.c | 7 ++++--- 2 files changed, 5 insertions(+), 3 deletions(-)
drivers/firewire/core.h +1 -0
@@ -38,6 +38,7 @@ void fw_notice(const struct fw_card *card, const char *fmt, ...);#define PHY_EXTENDED_REGISTERS 0xe0#define PHY_BUS_SHORT_RESET 0x40#define PHY_INT_STATUS_BITS 0x3c +#define PHY_ARB_TIMEOUT 0x08#define PHY_ENABLE_ACCEL 0x02#define PHY_ENABLE_MULTI 0x01#define PHY_PAGE_SELECT 0xe0
drivers/firewire/ohci.c +4 -3
@@ -2195,13 +2195,14 @@ static int configure_1394a_enhancements(struct fw_ohci *ohci)if (ohci->quirks &QUIRK_NO_1394A ) enable_1394a = false; -/* Configure PHY and link consistently. */ +/* Configure PHY and link consistently and reset the +* PHY arbitration timeout status */ if (enable_1394a) { clear =0 ; - set =PHY_ENABLE_ACCEL |PHY_ENABLE_MULTI ; + set =PHY_ENABLE_ACCEL |PHY_ENABLE_MULTI |PHY_ARB_TIMEOUT ; }else { clear =PHY_ENABLE_ACCEL |PHY_ENABLE_MULTI ; - set =0 ; + set =PHY_ARB_TIMEOUT ; } ret =update_phy_reg (ohci,5 , clear, set);if (ret <0 )
Signature · 1 line
1.8.1.2