Skip to contentSkip to conversation

regulator: wm8994: Provide default init data

PATCH New Mark Brown 1 participant 1 message Apr 5, 2013

Subsystems (2)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/1 regulator: wm8994: Provide default init data

Almost all systems use the regulators on the WM8994 series devices to provide DCVDD and AVDD1 so if no init data is supplied then set up the supplies for the user. This simplifies integration of the device into systems, especially when device tree is supported.

---
 drivers/regulator/wm8994-regulator.c |   41 ++++++++++++++++++++++++++++++++--
 1 file changed, 39 insertions(+), 2 deletions(-)
drivers/regulator/wm8994-regulator.c +39 -2
index 5115881..f03fbf1 100644
@@ -18,6 +18,7 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
 
@@ -28,6 +29,8 @@
 struct wm8994_ldo {
 	struct regulator_dev *regulator;
 	struct wm8994 *wm8994;
+	struct regulator_consumer_supply supply;
+	struct regulator_init_data init_data;
 };
 
 #define WM8994_LDO1_MAX_SELECTOR 0x7
@@ -99,6 +102,26 @@ static const struct regulator_desc wm8994_ldo_desc[] = {
 	},
 };
 
+static const struct regulator_consumer_supply wm8994_ldo_consumer[] = {
+	{ .supply = "AVDD1" },
+	{ .supply = "DCVDD" },
+};
+
+static const struct regulator_init_data wm8994_ldo_default[] = {
+	{
+		.constraints = {
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies = 1,
+	},
+	{
+		.constraints = {
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies = 1,
+	},
+};
+
 static int wm8994_ldo_probe(struct platform_device *pdev)
 {
 	struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent);
@@ -117,13 +140,27 @@ static int wm8994_ldo_probe(struct platform_device *pdev)
 	}
 
 	ldo->wm8994 = wm8994;
+	ldo->supply = wm8994_ldo_consumer[id];
+	ldo->supply.dev_name = dev_name(wm8994->dev);
 
 	config.dev = wm8994->dev;
 	config.driver_data = ldo;
 	config.regmap = wm8994->regmap;
-	if (pdata) {
-		config.init_data = pdata->ldo[id].init_data;
+	config.init_data = &ldo->init_data;
+	if (pdata)
 		config.ena_gpio = pdata->ldo[id].enable;
+
+	/* Use default constraints if none set up */
+	if (!pdata || !pdata->ldo[id].init_data) {
+		dev_dbg(wm8994->dev, "Using default init data, supply %s %s\n",
+			ldo->supply.dev_name, ldo->supply.supply);
+
+		ldo->init_data = wm8994_ldo_default[id];
+		ldo->init_data.consumer_supplies = &ldo->supply;
+		if (!config.ena_gpio)
+			ldo->init_data.constraints.valid_ops_mask = 0;
+	} else {
+		ldo->init_data = *pdata->ldo[id].init_data;
 	}
 
 	ldo->regulator = regulator_register(&wm8994_ldo_desc[id], &config);
Signature · 1 line
1.7.10.4