Skip to contentSkip to conversation

Don't disable hpet emulation on suspend

PATCH In review Derek Basehore 2 participants 2 messages Apr 10, 2013 Real time clock (RTC)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Don't disable hpet emulation on suspend

There's a bug where rtc alarms are ignored after the rtc cmos suspends but before the system finishes suspend. Since hpet emulation is disabled and it still handles the interrupts, a wake event is never registered which is done from the rtc layer. This reverts an earlier commit which disables hpet emulation. To fix the problem mentioned in that commit, the hpet_rtc_timer_init function is called directly on resume.

This reverts commit d1b2efa83fbf7b33919238fa29ef6ab935820103.

---
 drivers/rtc/rtc-cmos.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/rtc/rtc-cmos.c +2 -2
index af97c94..cc5bea9 100644
@@ -804,9 +804,8 @@ static int cmos_suspend(struct device *dev)
 			mask = RTC_IRQMASK;
 		tmp &= ~mask;
 		CMOS_WRITE(tmp, RTC_CONTROL);
+		hpet_mask_rtc_irq_bit(mask);
 
-		/* shut down hpet emulation - we don't need it for alarm */
-		hpet_mask_rtc_irq_bit(RTC_PIE|RTC_AIE|RTC_UIE);
 		cmos_checkintr(cmos, tmp);
 	}
 	spin_unlock_irq(&rtc_lock);
@@ -870,6 +869,7 @@ static int cmos_resume(struct device *dev)
 			rtc_update_irq(cmos->rtc, 1, mask);
 			tmp &= ~RTC_AIE;
 			hpet_mask_rtc_irq_bit(RTC_AIE);
+			hpet_rtc_timer_init();
 		} while (mask & RTC_AIE);
 		spin_unlock_irq(&rtc_lock);
 	}
Signature · 1 line
1.8.1.3
#1 lore raw
Quoted 25 lines · On Tue, 9 Apr 2013 17:36:13 -0700 Derek Basehore <[email protected]>…

There's a bug where rtc alarms are ignored after the rtc cmos suspends but before the system finishes suspend. Since hpet emulation is disabled and it still handles the interrupts, a wake event is never registered which is done from the rtc layer. This reverts an earlier commit which disables hpet emulation. To fix the problem mentioned in that commit, the hpet_rtc_timer_init function is called directly on resume.

This reverts commit d1b2efa83fbf7b33919238fa29ef6ab935820103.

...

drivers/rtc/rtc-cmos.c +1 -2
@@ -804,9 +804,8 @@ static int cmos_suspend(struct device *dev)
 			mask = RTC_IRQMASK;
 		tmp &= ~mask;
 		CMOS_WRITE(tmp, RTC_CONTROL);
+		hpet_mask_rtc_irq_bit(mask);
 
-		/* shut down hpet emulation - we don't need it for alarm */
-		hpet_mask_rtc_irq_bit(RTC_PIE|RTC_AIE|RTC_UIE);
 		cmos_checkintr(cmos, tmp);
 	}
 	spin_unlock_irq(&rtc_lock);

drivers/rtc/rtc-cmos.c static int cmos_resume(struct device *dev) · line 875

Quoted 7 lines
drivers/rtc/rtc-cmos.c +1 -0
@@ -870,6 +869,7 @@ static int cmos_resume(struct device *dev)
 			rtc_update_irq(cmos->rtc, 1, mask);
 			tmp &= ~RTC_AIE;
 			hpet_mask_rtc_irq_bit(RTC_AIE);
+			hpet_rtc_timer_init();
 		} while (mask & RTC_AIE);
 		spin_unlock_irq(&rtc_lock);
 	}

huh, so it's been broken for three years.

This calls hpet_rtc_timer_init() under spin_lock_irq() which is OK with the current implementation. And things should be OK when CONFIG_HPET_EMULATE_RTC=n.

Maxim, can you please review/test/etc?