ARM: Add Seagate GoFlex Home support
PATCH v4 1/1 ARM: Add Seagate GoFlex Home support
Add Seagate GoFlex Home support
Start with dockstar configuration
define support for RTC, DATE, SATA and EXT4FS
---
Changes in v4:
Remove board/Seagate/goflexhome/goflexhome.h from patch and merge it in configs/include/goflexhome.h Snip commit messages and move comments
Coding style changes
- Blank line between decl and code
- Dont mix declarations and code
Changes in v3:
Squash the board support in one file
Remove goflexhomemenu.c from this patch as its not board related
Changes in v2:
Coding style changes
MAINTAINERS | 4 + board/Seagate/goflexhome/Makefile | 51 +++++++++ board/Seagate/goflexhome/goflexhome.c | 189 +++++++++++++++++++++++++++++++++ board/Seagate/goflexhome/kwbimage.cfg | 168 +++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/goflexhome.h | 151 ++++++++++++++++++++++++++ 6 files changed, 564 insertions(+), 0 deletions(-) create mode 100644 board/Seagate/goflexhome/Makefile create mode 100644 board/Seagate/goflexhome/goflexhome.c create mode 100644 board/Seagate/goflexhome/kwbimage.cfg create mode 100644 include/configs/goflexhome.h
MAINTAINERS +4 -0
@@ -847,6 +847,10 @@ Sricharan R <[email protected]> omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC) omap5_evm ARM ARMV7 (OMAP5xx Soc) +Suriyan Ramasami <[email protected]> + + goflexhome ARM926EJS (Kirkwood SoC) + Thierry Reding <[email protected]> plutux Tegra20 (ARM7 & A9 Dual Core)
board/Seagate/goflexhome/Makefile new file +51 -0
51 lines not on this page · raw message
board/Seagate/goflexhome/goflexhome.c new file +189 -0
189 lines not on this page · raw message
board/Seagate/goflexhome/kwbimage.cfg new file +168 -0
168 lines not on this page · raw message
boards.cfg +1 -0
@@ -184,6 +184,7 @@ rd6281a arm arm926ejs - Marvell sheevaplug arm arm926ejs - Marvell kirkwood ib62x0 arm arm926ejs ib62x0 raidsonic kirkwood dockstar arm arm926ejs - Seagate kirkwood +goflexhome arm arm926ejs - Seagate kirkwood tk71 arm arm926ejs tk71 karo kirkwood devkit3250 arm arm926ejs devkit3250 timll lpc32xx jadecpu arm arm926ejs jadecpu syteco mb86r0x
include/configs/goflexhome.h new file +151 -0
151 lines not on this page · raw message
Signature · 1 line
1.7.1
PATCH v4 1/1 ARM: Add Seagate GoFlex Home support
Hi Suriyan,
Quoted 635 lines · Suriyan Ramasami
Add Seagate GoFlex Home support
Start with dockstar configuration
define support for RTC, DATE, SATA and EXT4FSSigned-off-by Suriyan Ramasami <[email protected]>---
Changes in v4:
Removeboard/Seagate/goflexhome/goflexhome.hfrom patch and merge it inconfigs/include/goflexhome.hSnip commit messages and move comments
Coding style changes
- Blank line between decl and code
- Dont mix declarations and codeChanges in v3:
Squash the board support in one file
Removegoflexhomemenu.cfrom this patch as its not board relatedChanges in v2:
Coding style changesMAINTAINERS | 4 + board/Seagate/goflexhome/Makefile | 51 +++++++++ board/Seagate/goflexhome/goflexhome.c | 189 +++++++++++++++++++++++++++++++++ board/Seagate/goflexhome/kwbimage.cfg | 168 +++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/goflexhome.h | 151 ++++++++++++++++++++++++++ 6 files changed, 564 insertions(+), 0 deletions(-) create mode 100644 board/Seagate/goflexhome/Makefile create mode 100644 board/Seagate/goflexhome/goflexhome.c create mode 100644 board/Seagate/goflexhome/kwbimage.cfg create mode 100644 include/configs/goflexhome.hMAINTAINERS +4
-0@@ -847,6 +847,10 @@ Sricharan R <[email protected]> omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC) omap5_evm ARM ARMV7 (OMAP5xx Soc) +Suriyan Ramasami <[email protected]> + + goflexhome ARM926EJS (Kirkwood SoC) + Thierry Reding <[email protected]> plutux Tegra20 (ARM7 & A9 Dual Core)board/Seagate/goflexhome/Makefile new file +51
-0@@ -0,0 +1,51 @@ +# +# Copyright (C) 2013 Suriyan Ramasami <[email protected]> +# +# Based on dockstar/Makefile originally written by +# Copyright (C) 2010 Eric C. Cooper <[email protected]> +# +# Based on sheevaplug/Makefile originally written by +# Prafulla Wadaskar <[email protected]> +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := goflexhome.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################board/Seagate/goflexhome/goflexhome.c new file +189
-0@@ -0,0 +1,189 @@ +/* +* Copyright (C) 2013 Suriyan Ramasami <[email protected]> +* +* Based on dockstar.c originally written by +* Copyright (C) 2010 Eric C. Cooper <[email protected]> +* +* Based on sheevaplug.c originally written by +* Prafulla Wadaskar <[email protected]> +* (C) Copyright 2009 +* Marvell Semiconductor <www.marvell.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +* MA 02110-1301 USA +*/ + +#include <common.h> +#include <miiphy.h> +#include <asm/arch/kirkwood.h> +#include <asm/arch/mpp.h> +#include <asm/arch/cpu.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR ; + +int board_early_init_f (void ) +{ +/* Multi-Purpose Pins Functionality configuration */ +static const u32 kwmpp_config[] = { +MPP0_NF_IO2 , +MPP1_NF_IO3 , +MPP2_NF_IO4 , +MPP3_NF_IO5 , +MPP4_NF_IO6 , +MPP5_NF_IO7 , + MPP6_SYSRST_OUTn, +MPP7_GPO , +MPP8_UART0_RTS , +MPP9_UART0_CTS , +MPP10_UART0_TXD , +MPP11_UART0_RXD , +MPP12_SD_CLK , +MPP13_SD_CMD , +MPP14_SD_D0 , +MPP15_SD_D1 , +MPP16_SD_D2 , +MPP17_SD_D3 , +MPP18_NF_IO0 , +MPP19_NF_IO1 , +MPP20_GPIO , +MPP21_GPIO , +MPP22_GPIO , +MPP23_GPIO , +MPP24_GPIO , +MPP25_GPIO , +MPP26_GPIO , +MPP27_GPIO , +MPP28_GPIO , +MPP29_TSMP9 , +MPP30_GPIO , +MPP31_GPIO , +MPP32_GPIO , +MPP33_GPIO , +MPP34_GPIO , +MPP35_GPIO , +MPP36_GPIO , +MPP37_GPIO , +MPP38_GPIO , +MPP39_GPIO , +MPP40_GPIO , +MPP41_GPIO , +MPP42_GPIO , +MPP43_GPIO , +MPP44_GPIO , +MPP45_GPIO , +MPP46_GPIO , +MPP47_GPIO , +MPP48_GPIO , +MPP49_GPIO , +0 + }; + +/* +* default gpio configuration +* There are maximum 64 gpios controlled through 2 sets of registers +* the below configuration configures mainly initial LED status +*/ +kw_config_gpio (GOFLEXHOME_OE_VAL_LOW , +GOFLEXHOME_OE_VAL_HIGH , +GOFLEXHOME_OE_LOW ,GOFLEXHOME_OE_HIGH ); +kirkwood_mpp_conf (kwmpp_config,NULL ); +return 0 ; +} + +int board_init (void ) +{ +/* +* arch number of board +*/ + gd->bd->bi_arch_number =MACH_TYPE_GOFLEXHOME ; + +/* address of boot parameters */ + gd->bd->bi_boot_params =kw_sdram_bar (0 ) +0x100 ; + +return 0 ; +} + +#ifdef CONFIG_RESET_PHY_R +/* Configure and enable MV88E1116 PHY */ +void reset_phy (void ) +{ +u16 reg; +u16 devadr; +char *name ="egiga0" ; + +if (miiphy_set_current_dev (name)) +return ; + +/* command to read PHY dev address */ +if (miiphy_read (name,0xEE ,0xEE , (u16 *)&devadr)) { +printf ("Err..%s could not read PHY dev address\n" , + __func__); +return ; + } + +/* +* Enable RGMII delay on Tx and Rx for CPU port +* Ref: sec 4.7.2 of chip datasheet +*/ +miiphy_write (name, devadr,MV88E1116_PGADR_REG ,2 ); +miiphy_read (name, devadr,MV88E1116_MAC_CTRL_REG , ®); + reg |= (MV88E1116_RGMII_RXTM_CTRL |MV88E1116_RGMII_TXTM_CTRL ); +miiphy_write (name, devadr,MV88E1116_MAC_CTRL_REG , reg); +miiphy_write (name, devadr,MV88E1116_PGADR_REG ,0 ); + +/* reset the phy */ +miiphy_reset (name, devadr); + +printf ("88E1116 Initialized on %s\n" , name); +} +#endif /* CONFIG_RESET_PHY_R */ + +#define GREEN_LED (1 << 14) +#define ORANGE_LED (1 << 15) +#define BOTH_LEDS (GREEN_LED | ORANGE_LED) +#define NEITHER_LED 0 + +static void set_leds (u32 leds,u32 blinking) +{ +struct kwgpio_registers *r; +u32 oe; +u32 bl; + + r = (struct kwgpio_registers *)KW_GPIO1_BASE ; + oe =readl (&r->oe) |BOTH_LEDS ; +writel (oe & ~leds, &r->oe);/* active low */ + bl =readl (&r->blink_en) & ~BOTH_LEDS ; +writel (bl | blinking, &r->blink_en); +} + +void show_boot_progress (int val) +{ +switch (val) { +case BOOTSTAGE_ID_RUN_OS :/* booting Linux */ +set_leds (BOTH_LEDS ,NEITHER_LED ); +break ; +case BOOTSTAGE_ID_NET_ETH_START :/* Ethernet initialization */ +set_leds (GREEN_LED ,GREEN_LED ); +break ; +default : +if (val <0 )/* error */ +set_leds (ORANGE_LED ,ORANGE_LED ); +break ; + } +}board/Seagate/goflexhome/kwbimage.cfg new file +168
-0@@ -0,0 +1,168 @@ +# +# Copyright (C) 2013 Suriyan Ramasami <[email protected]> +# +# Based on dockstar/kwbimage.cfg originally written by +# Copyright (C) 2010 Eric C. Cooper <[email protected]> +# +# Based on sheevaplug/kwbimage.cfg originally written by +# Prafulla Wadaskar <[email protected]> +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM nand +NAND_ECC_MODE default +NAND_PAGE_SIZE 0x0800 + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xFFD100e0 0x1b1b1b9b + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xFFD01400 0x43000c30 # DDR Configuration register +# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) +# bit23-14: zero +# bit24: 1= enable exit self refresh mode on DDR access +# bit25: 1 required +# bit29-26: zero +# bit31-30: 01 + +DATA 0xFFD01404 0x37543000 # DDR Controller Control Low +# bit 4: 0=addr/cmd in smame cycle +# bit 5: 0=clk is driven during self refresh, we don't care for APX +# bit 6: 0=use recommended falling edge of clk for addr/cmd +# bit14: 0=input buffer always powered up +# bit18: 1=cpu lock transaction enabled +# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 3 required +# bit31: 0=no additional STARTBURST delay + +DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) +# bit3-0: TRAS lsbs +# bit7-4: TRCD +# bit11- 8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: zero required + +DATA 0xFFD01410 0x0000000d # DDR Address Control +# bit1-0: 00, Cs0width=x8 +# bit3-2: 11, Cs0size=1Gb +# bit5-4: 00, Cs1width=nonexistent +# bit7-6: 00, Cs1size =nonexistent +# bit9-8: 00, Cs2width=nonexistent +# bit11-10: 00, Cs2size =nonexistent +# bit13-12: 00, Cs3width=nonexistent +# bit15-14: 00, Cs3size =nonexistent +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0 required + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0 required + +DATA 0xFFD01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0 required + +DATA 0xFFD0141C 0x00000C52 # DDR Mode +# bit2-0: 2, BurstLen=2 required +# bit3: 0, BurstType=0 required +# bit6-4: 4, CL=5 +# bit7: 0, TestMode=0 normal +# bit8: 0, DLL reset=0 normal +# bit11-9: 6, auto-precharge write recovery ???????????? +# bit12: 0, PD must be zero +# bit31-13: 0 required + +DATA 0xFFD01420 0x00000040 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 0, DDR drive strenght normal +# bit2: 0, DDR ODT control lsd (disabled) +# bit5-3: 000, required +# bit6: 1, DDR ODT control msb, (disabled) +# bit9-7: 000, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0 required + +DATA 0xFFD01424 0x0000F17F # DDR Controller Control High +# bit2-0: 111, required +# bit3 : 1 , MBUS Burst Chop disabled +# bit6-4: 111, required +# bit7 : 0 +# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz +# bit9 : 0 , no half clock cycle addition to dataout +# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals +# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh +# bit15-12: 1111 required +# bit31-16: 0 required + +DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) +DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) + +DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 +DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size +# bit0: 1, Window enabled +# bit1: 0, Write Protect disabled +# bit3-2: 00, CS0 hit selected +# bit23-4: ones, required +# bit31-24: 0x07, Size (i.e. 128MB) + +DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb +DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled + +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled + +DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low) +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) +# bit1-0: 00, ODT0 controlled by ODT Control (low) register above +# bit3-2: 01, ODT1 active NEVER! +# bit31-4: zero, required + +DATA 0xFFD0149C 0x0000E803 # CPU ODT Control +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +#bit0=1, enable DDR init upon this register write + +# End of Header extension +DATA 0x0 0x0boards.cfg +1
-0@@ -184,6 +184,7 @@ rd6281a arm arm926ejs - Marvell sheevaplug arm arm926ejs - Marvell kirkwood ib62x0 arm arm926ejs ib62x0 raidsonic kirkwood dockstar arm arm926ejs - Seagate kirkwood +goflexhome arm arm926ejs - Seagate kirkwood tk71 arm arm926ejs tk71 karo kirkwood devkit3250 arm arm926ejs devkit3250 timll lpc32xx jadecpu arm arm926ejs jadecpu syteco mb86r0xinclude/configs/goflexhome.h new file +141
-0@@ -0,0 +1,151 @@ +/* +* Copyright (C) 2013 Suriyan Ramasami <[email protected]> +* +* Based on dockstar.h originally written by +* Copyright (C) 2010 Eric C. Cooper <[email protected]> +* +* Based on sheevaplug.h originally written by +* Prafulla Wadaskar <[email protected]> +* (C) Copyright 2009 +* Marvell Semiconductor <www.marvell.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +* MA 02110-1301 USA +*/ + +#ifndef _CONFIG_GOFLEXHOME_H +#define _CONFIG_GOFLEXHOME_H + +/* +* Version number information +*/ +#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home" + +/* +* High Level Configuration Options (easy to change) +*/ +#define CONFIG_FEROCEON_88FR131 1/* CPU Core subversion */ +#define CONFIG_KIRKWOOD 1/* SOC Family Name */ +#define CONFIG_KW88F6281 1/* SOC Name */ +#define CONFIG_MACH_GOFLEXHOME /* Machine type */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* +* Default GPIO configuration and LED status +*/ +#define GOFLEXHOME_OE_LOW (~(0)) +#define GOFLEXHOME_OE_HIGH (~(0)) +#define GOFLEXHOME_OE_VAL_LOW (1 << 29)/* USB_PWEN low */ +#define GOFLEXHOME_OE_VAL_HIGH (1 << 17)/* LED pin high */ + +/* PHY related */ +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) + +/* +* Commands configuration +*/ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#include <config_cmd_default.h> +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EXT4 +#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ + +/* +* mv-common.h should be defined after CMD configs since it used them +* to enable certain macros +*/ +#include "mv-common.h" + +#undef CONFIG_SYS_PROMPT/* previously defined in mv-common.h */ +#define CONFIG_SYS_PROMPT "GoFlexHome> "/* Command Prompt */ + +/* +* Environment variables configurations +*/ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SECT_SIZE 0x20000/* 128K */ +#else +#define CONFIG_ENV_IS_NOWHERE 1/* if env in SDRAM */ +#endif +/* +* max 4k env size is enough, but in case of nand +* it has to be rounded to sector size +*/ +#define CONFIG_ENV_SIZE 0x20000/* 128k */ +#define CONFIG_ENV_ADDR 0xC0000 +#define CONFIG_ENV_OFFSET 0xC0000/* env starts here */ + +/* +* Default environment variables +*/ +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ + "ubi part root; " \ + "ubifsmount ubi:root; " \ + "ubifsload 0x800000 ${kernel}; " \ + "bootm 0x800000" + +#define CONFIG_MTDPARTS \ + "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=console=ttyS0,115200\0" \ + "mtdids=nand0=orion_nand\0" \ + "mtdparts="CONFIG_MTDPARTS \ + "kernel=/boot/uImage\0" \ + "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" + +/* +* Ethernet Driver configuration +*/ +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE_PORTS {1, 0}/* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0 +#endif /* CONFIG_CMD_NET */ + +/* +* * SATA Driver configuration +* */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
include/configs/goflexhome.h line 151
Quoted 10 lines
include/configs/goflexhome.h new file +10
-0+#endif /*CONFIG_MVSATA_IDE*/ + +/* +* * RTC driver configuration +* */ +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_MV +#endif /* CONFIG_CMD_DATE */ + +#endif /* _CONFIG_GOFLEXHOME_H */
Applied to u-boot-arm/master, thanks!
Amicalement,
Signature · 1 line
Albert.