regulator: palmas: Don't update tstep register for SMPS3 and SMPS7
Subsystems (2)
PATCH v2 1/1 regulator: palmas: Don't update tstep register for SMPS3 and SMPS7
SMPS3 and SMPS7 do not have tstep_addr setting, so current code actually writes 0 to smps12_ctl (offset is 0) register when set_ramp_delay callback is called for SMPS3 and SMPS7.
Signed-off-by Axel Lin <[email protected]>
--- drivers/regulator/palmas-regulator.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/regulator/palmas-regulator.c +7 -0
@@ -438,6 +438,13 @@ static int palmas_smps_set_ramp_delay(struct regulator_dev *rdev,unsigned int addr = palmas_regs_info[id].tstep_addr;int ret; +/* SMPS3 and SMPS7 do not have tstep_addr setting */ +switch (id) { +case PALMAS_REG_SMPS3 : +case PALMAS_REG_SMPS7 : +return 0 ; + } +if (ramp_delay <=0 ) reg =0 ;else if (ramp_delay <2500 )
Signature · 1 line
1.7.10.4
Quoted 5 lines · Axel Lin
SMPS3 and SMPS7 do not have
tstep_addrsetting, so current code actually writes 0 tosmps12_ctl(offset is 0) register whenset_ramp_delaycallback is called for SMPS3 and SMPS7.Signed-off-by Axel Lin <[email protected]>
Acked-by Laxman Dewangan <[email protected]>