Skip to contentSkip to conversation

mx51evk: Update environment in order to allow booting a dt kernel

PATCH Superseded Fabio Estevam 2 participants 3 messages Apr 19, 2013

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 mx51evk: Update environment in order to allow booting a dt kernel

From: Fabio Estevam <[email protected]>

Update the environment as done in other imx boards to allow easy switching between booting a non-dt kernel and a dt kernel.

Boot tested the following kernels:

- 2.6.35 from FSL (11.09 branch)
- 3.9-rc7 non-dt
- 3.9-rc7 dt

---
Changes since v1:
- Do not remove mmcrootfstype
- Fix typo in Subject
- Improve commit log by adding the tested booted kernels

 include/configs/mx51evk.h |   42 +++++++++++++++++++++++++++++++++++++++---
 1 file changed, 39 insertions(+), 3 deletions(-)
include/configs/mx51evk.h +39 -3
index cb3d938..4545a80 100644
@@ -149,11 +149,15 @@
 
 #define CONFIG_ETHPRIME		"FEC0"
 
-#define CONFIG_LOADADDR		0x90800000	/* loadaddr env var */
+#define CONFIG_LOADADDR		0x92000000	/* loadaddr env var */
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"uimage=uImage\0" \
+	"fdt_file=imx51-babbage.dtb\0" \
+	"fdt_addr=0x91000000\0" \
+	"boot_fdt=try\0" \
+	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
 	"mmcpart=2\0" \
 	"mmcroot=/dev/mmcblk0p3 rw\0" \
@@ -166,15 +170,47 @@
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
 	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
-		"bootm\0" \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootm; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootm; " \
+		"fi;\0" \
 	"netargs=setenv bootargs console=ttymxc0,${baudrate} " \
 		"root=/dev/nfs " \
 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 	"netboot=echo Booting from net ...; " \
 		"run netargs; " \
-		"dhcp ${uimage}; bootm\0" \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${uimage}; " \
+		"if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootm; " \
+				"else " \
+					"echo ERROR: Cannot load the DT; " \
+					"exit; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootm; " \
+		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
 	"mmc dev ${mmcdev}; if mmc rescan; then " \
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH v2 1/1 mx51evk: Update environment in order to allow booting a dt kernel

Quoted 5 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

Update the environment as done in other imx boards to allow easy switching between booting a non-dt kernel and a dt kernel.

Quoted 7 lines

Boot tested the following kernels:

- 2.6.35 from FSL (11.09 branch)
- 3.9-rc7 non-dt
- 3.9-rc7 dt

Your commit log say nothing about the LOADADDR; I'd also prefer if you could reuse most of other environments as it'd keep them mostly in sync (so please remove mmcfstype if you have no other reason to keep it).

--
Otavio Salvador O.S. Systems
E-mail: otavio at ossystems.com.br http://www.ossystems.com.br
Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br

#2 lore raw

PATCH v2 1/1 mx51evk: Update environment in order to allow booting a dt kernel

Quoted 1 line · Otavio Salvador

Your commit log say nothing about the LOADADDR; I'd also prefer if you

Ok, I can add a comment about the LOADADDR change in v3.

Quoted 3 lines

could reuse most of other environments as it'd keep them mostly in sync (so please remove mmcfstype if you have no other reason to keep it).

The removal of mmcrootfstype is unrelated to the change proposed by this patch.

The goal of this patch is to be able to boot a dt kernel.