regulator: lp872x: Use regulator_map_voltage_ascend
PATCH 1/2 regulator: lp872x: Use regulator_map_voltage_ascend
All regulators have ascendant voltage list in this driver. Use regulator_map_voltage_ascend for them.
Signed-off-by Axel Lin <[email protected]>
--- drivers/regulator/lp872x.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/regulator/lp872x.c +3 -0
@@ -478,6 +478,7 @@ static unsigned int lp872x_buck_get_mode(struct regulator_dev *rdev)static struct regulator_ops lp872x_ldo_ops = { .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .enable = regulator_enable_regmap,
@@ -488,6 +489,7 @@ static struct regulator_ops lp872x_ldo_ops = {static struct regulator_ops lp8720_buck_ops = { .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, .set_voltage_sel = lp872x_buck_set_voltage_sel, .get_voltage_sel = lp872x_buck_get_voltage_sel, .enable = regulator_enable_regmap,
@@ -500,6 +502,7 @@ static struct regulator_ops lp8720_buck_ops = {static struct regulator_ops lp8725_buck_ops = { .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, .set_voltage_sel = lp872x_buck_set_voltage_sel, .get_voltage_sel = lp872x_buck_get_voltage_sel, .enable = regulator_enable_regmap,
Signature · 1 line
1.7.10.4
PATCH 2/2 regulator: lp8788-buck: Use regulator_map_voltage_ascend
All regulators have ascendant voltage list in this driver. Use regulator_map_voltage_ascend for them.
Signed-off-by Axel Lin <[email protected]>
--- drivers/regulator/lp8788-buck.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/regulator/lp8788-buck.c +2 -0
@@ -346,6 +346,7 @@ static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)static struct regulator_ops lp8788_buck12_ops = { .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, .set_voltage_sel = lp8788_buck12_set_voltage_sel, .get_voltage_sel = lp8788_buck12_get_voltage_sel, .enable = regulator_enable_regmap,
@@ -358,6 +359,7 @@ static struct regulator_ops lp8788_buck12_ops = {static struct regulator_ops lp8788_buck34_ops = { .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .enable = regulator_enable_regmap,
Signature · 1 line
1.7.10.4
Quoted 2 lines · Axel Lin
All regulators have ascendant voltage list in this driver. Use
regulator_map_voltage_ascendfor them.
Applied both, thanks.