Skip to contentSkip to conversation

NVMe: Use user defined admin ioctl timeout

PATCH Superseded Keith Busch 2 participants 2 messages May 7, 2013

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 NVMe: Use user defined admin ioctl timeout

Use the user ioctl command timeout value if it is specified, and use the default admin command timeout if one is not given.

Signed-off-by Keith Busch <keith.busch at intel.com>
---
 drivers/block/nvme-core.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)
drivers/block/nvme-core.c +5 -1
index a232dfc..3ff3ba0 100644
@@ -1362,6 +1362,7 @@ static int nvme_user_admin_cmd(struct nvme_dev *dev,
 	struct nvme_command c;
 	int status, length;
 	struct nvme_iod *uninitialized_var(iod);
+	unsigned timeout;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
@@ -1391,10 +1392,13 @@ static int nvme_user_admin_cmd(struct nvme_dev *dev,
 								GFP_KERNEL);
 	}
 
+	timeout = cmd.timeout_ms ? DIV_ROUND_UP(cmd.timeout_ms * HZ, 1000):
+								ADMIN_TIMEOUT;
 	if (length != cmd.data_len)
 		status = -ENOMEM;
 	else
-		status = nvme_submit_admin_cmd(dev, &c, &cmd.result);
+		status = nvme_submit_sync_cmd(dev->queues[0], &c, &cmd.result,
+								timeout);
 
 	if (cmd.data_len) {
 		nvme_unmap_user_pages(dev, cmd.opcode & 1, iod);
Signature · 1 line
1.7.0.4
#1 lore raw

PATCH 1/1 NVMe: Use user defined admin ioctl timeout

drivers/block/nvme-core.c static int nvme_user_admin_cmd(struct nvme_dev *dev, · line 1395

Quoted 1 line · Keith Busch
drivers/block/nvme-core.c +1 -0
+	timeout = cmd.timeout_ms ? DIV_ROUND_UP(cmd.timeout_ms * HZ, 1000):

We have a fine function called msecs_to_jiffies(), which I'd prefer you to use instead :-)