Skip to contentSkip to conversation

board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define

PATCH Applied Prabhakar Kushwaha 2 participants 2 messages May 17, 2013 – Jun 21, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define

PCIe TLB should be created with CONFIG_PCI defined

---
Based upon git://git.denx.de/u-boot.git branch master This patch depends upon following patch set
1) powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399

      http://patchwork.ozlabs.org/patch/236849/
  2) powerpc/mpc85xx: new SPL support for IFC NAND
      http://patchwork.ozlabs.org/patch/236850/
  3) board/p1010rdb:Add NAND boot support using new SPL format
     http://patchwork.ozlabs.org/patch/236851/
  4) board/bsc9131rdb:Add NAND boot support using new SPL format
     http://patchwork.ozlabs.org/patch/236852/
  5) board/bsc9132qds:Add NAND boot support using new SPL format
     http://patchwork.ozlabs.org/patch/236853/
 board/freescale/p1010rdb/tlb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
board/freescale/p1010rdb/tlb.c +1 -1
index 7a8690a..bf9ed3c 100644
@@ -64,7 +64,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			0, 3, BOOKE_PAGESZ_16M, 1),
 #endif
 
-#ifndef CONFIG_PCI
+#ifdef CONFIG_PCI
 	/* *I*G* - PCI */
 	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
 			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
Signature · 1 line
1.7.9.5