Skip to contentSkip to conversation

sfi: fix compiler warnings

PATCH RESEND Superseded Andy Shevchenko 2 participants 6 messages May 28, 2013 – May 31, 2013

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/3 sfi: fix compiler warnings

This fixes the following compiler warnings when build is done by make W=1.

drivers/sfi/sfi_acpi.c:154:5: warning: no previous prototype for ‘sfi_acpi_table_parse’ [-Wmissing-prototypes]

drivers/sfi/sfi_core.c:164:26: warning: no previous prototype for ‘sfi_map_table’ [-Wmissing-prototypes] drivers/sfi/sfi_core.c:192:6: warning: no previous prototype for ‘sfi_unmap_table’ [-Wmissing-prototypes]

Indentation fixes are also included.

---
 drivers/sfi/sfi_acpi.c   | 8 ++++----
 drivers/sfi/sfi_core.c   | 4 ++--
 include/linux/sfi_acpi.h | 2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)
drivers/sfi/sfi_acpi.c +4 -4
index f5b4ca5..728a2e2 100644
@@ -63,6 +63,7 @@
 #include <acpi/acpi.h>
 
 #include <linux/sfi.h>
+#include <linux/sfi_acpi.h>
 #include "sfi_core.h"
 
 /*
@@ -152,7 +153,7 @@ static void sfi_acpi_put_table(struct acpi_table_header *table)
  * Find specified table in XSDT, run handler on it and return its return value
  */
 int sfi_acpi_table_parse(char *signature, char *oem_id, char *oem_table_id,
-			int(*handler)(struct acpi_table_header *))
+			 int(*handler)(struct acpi_table_header *))
 {
 	struct acpi_table_header *table = NULL;
 	struct sfi_table_key key;
@@ -175,8 +176,8 @@ int sfi_acpi_table_parse(char *signature, char *oem_id, char *oem_table_id,
 }
 
 static ssize_t sfi_acpi_table_show(struct file *filp, struct kobject *kobj,
-			       struct bin_attribute *bin_attr, char *buf,
-			       loff_t offset, size_t count)
+				   struct bin_attribute *bin_attr, char *buf,
+				   loff_t offset, size_t count)
 {
 	struct sfi_table_attr *tbl_attr =
 	    container_of(bin_attr, struct sfi_table_attr, attr);
@@ -199,7 +200,6 @@ static ssize_t sfi_acpi_table_show(struct file *filp, struct kobject *kobj,
 	return cnt;
 }
 
-
 void __init sfi_acpi_sysfs_init(void)
 {
 	u32 tbl_cnt, i;
drivers/sfi/sfi_core.c +2 -2
index 1e824fb..296db7a 100644
@@ -161,7 +161,7 @@ static int sfi_verify_table(struct sfi_table_header *table)
  * Check for common case that we can re-use mapping to SYST,
  * which requires syst_pa, syst_va to be initialized.
  */
-struct sfi_table_header *sfi_map_table(u64 pa)
+static struct sfi_table_header *sfi_map_table(u64 pa)
 {
 	struct sfi_table_header *th;
 	u32 length;
@@ -189,7 +189,7 @@ struct sfi_table_header *sfi_map_table(u64 pa)
  * Undoes effect of sfi_map_table() by unmapping table
  * if it did not completely fit on same page as SYST.
  */
-void sfi_unmap_table(struct sfi_table_header *th)
+static void sfi_unmap_table(struct sfi_table_header *th)
 {
 	if (!TABLE_ON_PAGE(syst_va, th, th->len))
 		sfi_unmap_memory(th, TABLE_ON_PAGE(th, th, th->len) ?
include/linux/sfi_acpi.h +1 -1
index 631af63..1a88ef6 100644
@@ -60,7 +60,7 @@
 #define _LINUX_SFI_ACPI_H
 
 #ifdef CONFIG_SFI
-#include <acpi/acpi.h>		/* struct acpi_table_header */
+#include <linux/acpi.h>		/* struct acpi_table_header */
 
 extern int sfi_acpi_table_parse(char *signature, char *oem_id,
 				char *oem_table_id,
Signature · 1 line
1.8.2.rc0.22.gb3600c3
#3 lore raw

PATCH RESEND 3/3 x86: mrst: move to generic SFI GPIO API

Let's use the common SFI helpers for GPIO API.

---
 arch/x86/platform/mrst/mrst.c | 94 ++++++++++---------------------------------
 1 file changed, 22 insertions(+), 72 deletions(-)
arch/x86/platform/mrst/mrst.c +22 -72
index a0a0a43..9ba13d8 100644
@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/scatterlist.h>
 #include <linux/sfi.h>
+#include <linux/sfi_gpio.h>
 #include <linux/intel_pmic_gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
@@ -28,7 +29,6 @@
 #include <linux/module.h>
 #include <linux/notifier.h>
 #include <linux/mfd/intel_msic.h>
-#include <linux/gpio.h>
 #include <linux/i2c/tc35876x.h>
 
 #include <asm/setup.h>
@@ -219,7 +219,7 @@ static unsigned long __init mrst_calibrate_tsc(void)
 	lapic_timer_frequency = fsb * 1000 / HZ;
 	/* mark tsc clocksource as reliable */
 	set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
-	
+
 	if (fast_calibrate)
 		return fast_calibrate;
 
@@ -338,55 +338,6 @@ static inline int __init setup_x86_mrst_timer(char *arg)
 __setup("x86_mrst_timer=", setup_x86_mrst_timer);
 
 /*
- * Parsing GPIO table first, since the DEVS table will need this table
- * to map the pin name to the actual pin.
- */
-static struct sfi_gpio_table_entry *gpio_table;
-static int gpio_num_entry;
-
-static int __init sfi_parse_gpio(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_gpio_table_entry *pentry;
-	int num, i;
-
-	if (gpio_table)
-		return 0;
-	sb = (struct sfi_table_simple *)table;
-	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
-	pentry = (struct sfi_gpio_table_entry *)sb->pentry;
-
-	gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
-	if (!gpio_table)
-		return -1;
-	memcpy(gpio_table, pentry, num * sizeof(*pentry));
-	gpio_num_entry = num;
-
-	pr_debug("GPIO pin info:\n");
-	for (i = 0; i < num; i++, pentry++)
-		pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
-		" pin = %d\n", i,
-			pentry->controller_name,
-			pentry->pin_name,
-			pentry->pin_no);
-	return 0;
-}
-
-static int get_gpio_by_name(const char *name)
-{
-	struct sfi_gpio_table_entry *pentry = gpio_table;
-	int i;
-
-	if (!pentry)
-		return -1;
-	for (i = 0; i < gpio_num_entry; i++, pentry++) {
-		if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
-			return pentry->pin_no;
-	}
-	return -1;
-}
-
-/*
  * Here defines the array of devices platform data that IAFW would export
  * through SFI "DEVS" table, we use name and type to match the device and
  * its platform data.
@@ -404,7 +355,7 @@ struct devs_id {
 static void __init *pmic_gpio_platform_data(void *info)
 {
 	static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
-	int gpio_base = get_gpio_by_name("pmic_gpio_base");
+	int gpio_base = sfi_get_gpio_by_name("pmic_gpio_base");
 
 	if (gpio_base == -1)
 		gpio_base = 64;
@@ -418,7 +369,7 @@ static void __init *pmic_gpio_platform_data(void *info)
 static void __init *max3111_platform_data(void *info)
 {
 	struct spi_board_info *spi_info = info;
-	int intr = get_gpio_by_name("max3111_int");
+	int intr = sfi_get_gpio_by_name("max3111_int");
 
 	spi_info->mode = SPI_MODE_0;
 	if (intr == -1)
@@ -456,8 +407,8 @@ static void __init *max7315_platform_data(void *info)
 		strcpy(intr_pin_name, "max7315_int");
 	}
 
-	gpio_base = get_gpio_by_name(base_pin_name);
-	intr = get_gpio_by_name(intr_pin_name);
+	gpio_base = sfi_get_gpio_by_name(base_pin_name);
+	intr = sfi_get_gpio_by_name(intr_pin_name);
 
 	if (gpio_base == -1)
 		return NULL;
@@ -484,8 +435,8 @@ static void *tca6416_platform_data(void *info)
 	strcpy(base_pin_name, "tca6416_base");
 	strcpy(intr_pin_name, "tca6416_int");
 
-	gpio_base = get_gpio_by_name(base_pin_name);
-	intr = get_gpio_by_name(intr_pin_name);
+	gpio_base = sfi_get_gpio_by_name(base_pin_name);
+	intr = sfi_get_gpio_by_name(intr_pin_name);
 
 	if (gpio_base == -1)
 		return NULL;
@@ -503,7 +454,7 @@ static void *tca6416_platform_data(void *info)
 static void *mpu3050_platform_data(void *info)
 {
 	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("mpu3050_int");
+	int intr = sfi_get_gpio_by_name("mpu3050_int");
 
 	if (intr == -1)
 		return NULL;
@@ -516,8 +467,8 @@ static void __init *emc1403_platform_data(void *info)
 {
 	static short intr2nd_pdata;
 	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("thermal_int");
-	int intr2nd = get_gpio_by_name("thermal_alert");
+	int intr = sfi_get_gpio_by_name("thermal_int");
+	int intr2nd = sfi_get_gpio_by_name("thermal_alert");
 
 	if (intr == -1 || intr2nd == -1)
 		return NULL;
@@ -532,8 +483,8 @@ static void __init *lis331dl_platform_data(void *info)
 {
 	static short intr2nd_pdata;
 	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("accel_int");
-	int intr2nd = get_gpio_by_name("accel_2");
+	int intr = sfi_get_gpio_by_name("accel_int");
+	int intr2nd = sfi_get_gpio_by_name("accel_2");
 
 	if (intr == -1 || intr2nd == -1)
 		return NULL;
@@ -628,7 +579,7 @@ static void *msic_battery_platform_data(void *info)
 static void *msic_gpio_platform_data(void *info)
 {
 	static struct intel_msic_gpio_pdata pdata;
-	int gpio = get_gpio_by_name("msic_gpio_base");
+	int gpio = sfi_get_gpio_by_name("msic_gpio_base");
 
 	if (gpio < 0)
 		return NULL;
@@ -660,7 +611,7 @@ static void *msic_power_btn_platform_data(void *info)
 static void *msic_ocd_platform_data(void *info)
 {
 	static struct intel_msic_ocd_pdata pdata;
-	int gpio = get_gpio_by_name("ocd_gpio");
+	int gpio = sfi_get_gpio_by_name("ocd_gpio");
 
 	if (gpio < 0)
 		return NULL;
@@ -679,14 +630,14 @@ static void *msic_thermal_platform_data(void *info)
 /* tc35876x DSI-LVDS bridge chip and panel platform data */
 static void *tc35876x_platform_data(void *data)
 {
-       static struct tc35876x_platform_data pdata;
+	static struct tc35876x_platform_data pdata;
 
-       /* gpio pins set to -1 will not be used by the driver */
-       pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
-       pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
-       pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
+	/* gpio pins set to -1 will not be used by the driver */
+	pdata.gpio_bridge_reset = sfi_get_gpio_by_name("LCMB_RXEN");
+	pdata.gpio_panel_bl_en = sfi_get_gpio_by_name("6S6P_BL_EN");
+	pdata.gpio_panel_vadd = sfi_get_gpio_by_name("EN_VREG_LCD_V3P3");
 
-       return &pdata;
+	return &pdata;
 }
 
 static const struct devs_id __initconst device_ids[] = {
@@ -984,7 +935,6 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 
 static int __init mrst_platform_init(void)
 {
-	sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
 	sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
 	return 0;
 }
@@ -1033,7 +983,7 @@ static int __init pb_keys_init(void)
 
 	num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
 	for (i = 0; i < num; i++) {
-		gb[i].gpio = get_gpio_by_name(gb[i].desc);
+		gb[i].gpio = sfi_get_gpio_by_name(gb[i].desc);
 		pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc, gb[i].gpio);
 		if (gb[i].gpio == -1)
 			continue;
Signature · 1 line
1.8.2.rc0.22.gb3600c3
#1 lore raw

PATCH RESEND 2/3 gpiolib: append SFI helpers for GPIO API

In reply to Andy Shevchenko

To support some (legacy) firmwares and platforms let's make life easier for their customers.

This patch extracts SFI GPIO API from arch/x86/platform/mrst/mrst.c.

---
 drivers/gpio/Kconfig       |  4 +++
 drivers/gpio/Makefile      |  1 +
 drivers/gpio/gpiolib-sfi.c | 76 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/sfi/sfi_core.c     |  7 +++++
 include/linux/sfi_gpio.h   | 27 ++++++++++++++++
 5 files changed, 115 insertions(+)
 create mode 100644 drivers/gpio/gpiolib-sfi.c
 create mode 100644 include/linux/sfi_gpio.h
drivers/gpio/Kconfig +4 -0
index 573c449..8e4b0b8 100644
@@ -51,6 +51,10 @@ config OF_GPIO
 	def_bool y
 	depends on OF
 
+config GPIO_SFI
+	def_bool y
+	depends on SFI
+
 config GPIO_ACPI
 	def_bool y
 	depends on ACPI
drivers/gpio/Makefile +1 -0
index 0cb2d65..63d2abd 100644
@@ -5,6 +5,7 @@ ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
 obj-$(CONFIG_GPIO_DEVRES)	+= devres.o
 obj-$(CONFIG_GPIOLIB)		+= gpiolib.o
 obj-$(CONFIG_OF_GPIO)		+= gpiolib-of.o
+obj-$(CONFIG_GPIO_SFI)		+= gpiolib-sfi.o
 obj-$(CONFIG_GPIO_ACPI)		+= gpiolib-acpi.o
 
 # Device drivers. Generally keep list sorted alphabetically
drivers/gpio/gpiolib-sfi.c new file +76 -0

76 lines not on this page · raw message

drivers/sfi/sfi_core.c +7 -0
index 296db7a..2828da0 100644
@@ -67,6 +67,7 @@
 #include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/sfi.h>
+#include <linux/sfi_gpio.h>
 #include <linux/slab.h>
 
 #include "sfi_core.h"
@@ -512,6 +513,12 @@ void __init sfi_init_late(void)
 	syst_va = sfi_map_memory(syst_pa, length);
 
 	sfi_acpi_init();
+
+	/*
+	 * Parsing GPIO table first, since the DEVS table will need this table
+	 * to map the pin name to the actual pin.
+	 */
+	sfi_gpio_init();
 }
 
 /*
include/linux/sfi_gpio.h new file +27 -0
new file mode 100644
index 0000000..ef7e497
@@ -0,0 +1,27 @@
+#ifndef _LINUX_SFI_GPIO_H_
+#define _LINUX_SFI_GPIO_H_
+
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/sfi.h>
+
+#ifdef CONFIG_GPIO_SFI
+
+int sfi_get_gpio_by_name(const char *name);
+int __init sfi_gpio_init(void);
+
+#else /* CONFIG_GPIO_SFI */
+
+static inline int sfi_get_gpio_by_name(const char *name);
+{
+	return -1;
+}
+
+static inline int __init sfi_gpio_init(void)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_GPIO_SFI */
+
+#endif /* _LINUX_SFI_GPIO_H_ */
Signature · 1 line
1.8.2.rc0.22.gb3600c3
#2 lore raw

Re: [PATCH, resend 2/3] gpiolib: append SFI helpers for GPIO API

Drop this one away, Sathyanarayanan Kuppuswamy takes care about it in his patchset.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#4 lore raw

Re: [PATCH, resend 3/3] x86: mrst: move to generic SFI GPIO API

In reply to Andy Shevchenko

Drop this one away, Sathyanarayanan Kuppuswamy takes care about it in his patchset.

Signature · 2 lines
With Best Regards,
Andy Shevchenko