sf: spansion: Add support for S25FL128S
PATCH v2 1/1 sf: spansion: Add support for S25FL128S
SPANSION recommend S25FL128S supersedes S25FL129P, and the two flash memory have the same device ID and Memory architecture. So they can use the same config parameters.
Signed-off-by Xie Xiaobo <[email protected]>
--- drivers/mtd/spi/spansion.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mtd/spi/spansion.c +1 -1
@@ -94,7 +94,7 @@ static const struct spansion_spi_flash_params spansion_spi_flash_table[] = { .idcode2 = 0x4d01, .pages_per_sector = 256, .nr_sectors = 256, - .name = "S25FL129P_64K", + .name = "S25FL129P_64K/S25FL128S_64K", }, { .idcode1 = 0x2019,
Signature · 1 line
1.8.0
PATCH v2 1/1 sf: spansion: Add support for S25FL128S
Quoted 14 lines · Xie Xiaobo
SPANSION recommend S25FL128S supersedes S25FL129P, and the two flash memory have the same device ID and Memory architecture. So they can use the same config parameters.
Signed-off-by Xie Xiaobo <[email protected]>--- drivers/mtd/spi/spansion.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/mtd/spi/spansion.c +0
-0
drivers/mtd/spi/spansion.c static const struct spansion_spi_flash_params spansion_spi_flash_table[] = { · line 100
Quoted 8 lines
drivers/mtd/spi/spansion.c +1
-1@@ -94,7 +94,7 @@ static const struct spansion_spi_flash_params spansion_spi_flash_table[] = { .idcode2 = 0x4d01, .pages_per_sector = 256, .nr_sectors = 256, - .name = "S25FL129P_64K", + .name = "S25FL129P_64K/S25FL128S_64K", }, { .idcode1 = 0x2019,
Thanks for this patch, but
Sent the same change with your name as author. no issues.
http://patchwork.ozlabs.org/patch/247607/
--
Thanks,
Jagan.