rts5139 Fix SD card detection and use correct transfer interval
cover rts5139 Fix SD card detection and use correct transfer interval
The SD card reader slot on my Samsung Series 7 ultrabook never worked and still wasn't working with 3.10-rc3, also the syslog was spammed. The following patch fixes both.
The timeout detection implemented in this driver isn't very robust, although the USB interrupt transfer is successful, the polling thread often reported timeouts because the 50ms had expired before it got scheduled, and the SD card wasn't detected. Increasing it to 100ms at least makes it work.
Using the correct interval as reported by the endpoint also stops the syslog spam printed by xhci.
Marcus Overhagen (1):
Fix SD card detection and use correct transfer interval.
drivers/staging/rts5139/rts51x_transport.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
Signature · 1 line
1.8.1.2
PATCH 1/1 Fix SD card detection and use correct transfer interval.
Increasing the timeout when polling for card status to 100ms as used at other places in this driver fixes SD card detection.
Also use correct interval when doing the interrupt transfer, this fixes the "xhci_queue_intr_tx: 74 callbacks suppressed" spamming to syslog that was occuring when this driver is used.
--- drivers/staging/rts5139/rts51x_transport.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/rts5139/rts51x_transport.c +4 -4
@@ -635,12 +635,12 @@ int rts51x_get_epc_status(struct rts51x_chip *chip, u16 *status) ep = chip->usb->pusb_dev->ep_in[usb_pipeendpoint (pipe)];/* fill and submit the URB */ -/* We set interval to 1 here, so the polling interval is controlled -* by our polling thread */ +/* Set interval to 10 here to match the endpoint descriptor, +* the polling interval is controlled by the polling thread */ usb_fill_int_urb (chip->usb->intr_urb, chip->usb->pusb_dev, pipe, - status,2 , urb_done_completion, &urb_done,1 ); + status,2 , urb_done_completion, &urb_done,10 ); - result =rts51x_msg_common (chip, chip->usb->intr_urb,50 ); + result =rts51x_msg_common (chip, chip->usb->intr_urb,100 );return interpret_urb_result (chip, pipe,2 , result, chip->usb->intr_urb->actual_length);
Signature · 1 line
1.8.1.2
Re: [PATCH 1/1] Fix SD card detection and use correct transfer interval.
Quoted 8 lines · Marcus Overhagen <marcus.overhagen <at> gmail.com> writes:
Increasing the timeout when polling for card status to 100ms as used at other places in this driver fixes SD card detection.
Also use correct interval when doing the interrupt transfer, this fixes the "
xhci_queue_intr_tx: 74 callbacks suppressed" spamming to syslog that was occuring when this driver is used.
Review
Quoted 6 lines
Signed-off-by Marcus Overhagen <marcus.overhagen <at> gmail.com>--- drivers/staging/rts5139/rts51x_transport.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)(quoted diff) +0
-0
b/drivers/staging/rts5139/rts51x_transport.c
drivers/staging/rts5139/rts51x_transport.c
Quoted 4 lines
index 89e4d80..c172f4a 100644
drivers/staging/rts5139/rts51x_transport.c +0
-0<at> <at> -635,12 +635,12 <at> <at> int rts51x_get_epc_status(struct
rts51x_chip *chip, u16 *status)
Quoted 6 lines
drivers/staging/rts5139/rts51x_transport.c +1
-2ep = chip->usb->pusb_dev->ep_in[usb_pipeendpoint (pipe)];/* fill and submit the URB */ -/* We set interval to 1 here, so the polling interval is controlled -* by our polling thread */ +/* Set interval to 10 here to match the endpoint descriptor,
drivers/staging/rts5139/rts51x_transport.c int rts51x_get_epc_status(struct rts51x_chip *chip, u16 *status) · line 646
Quoted 10 lines
drivers/staging/rts5139/rts51x_transport.c +3
-2+* the polling interval is controlled by the polling thread */ usb_fill_int_urb (chip->usb->intr_urb, chip->usb->pusb_dev, pipe, - status,2 , urb_done_completion, &urb_done,1 ); + status,2 , urb_done_completion, &urb_done,10 ); - result =rts51x_msg_common (chip, chip->usb->intr_urb,50 ); + result =rts51x_msg_common (chip, chip->usb->intr_urb,100 );return interpret_urb_result (chip, pipe,2 , result, chip->usb->intr_urb->actual_length);
Hi Marcus,
I'm trying to apply this patch to 3.8.0-18 kernel tree but looks like it
doesn't want to take (Ubuntu 13.04 stock)
I don't suppose you have a patch for this version?, not quite sure if reading
the patch file properly but assuming I get changes in what is the correct way to just compile this module and insert into running config?
Thanks
Simon
Re: [PATCH 1/1] Fix SD card detection and use correct transfer interval.
Hi,
to revive a rather neglected topic (still no reply?):
Quoted 3 lines
I don't suppose you have a patch for this version?, not quite sure if reading the patch file properly but assuming I get changes in what is the correct way to just compile this module and insert into running config?
Try
make M=sound/pci modules
(and perhaps followed by modules_install, too)
or perhaps even simply
make drivers/char/rtc.ko
I'm working on extending some relevant docs, too, but don't hold your breath... (slowly but surely extending my local git data store)
Andreas Mohr