pinctrl: exynos: ack level-triggered interrupts before unmasking
Subsystems (2)
PATCH v3 1/1 pinctrl: exynos: ack level-triggered interrupts before unmasking
A level-triggered interrupt should be acked after the interrupt line becomes inactive and before it is unmasked, or else another interrupt will be immediately triggered. Acking before or after calling the handler is not enough.
---
Changes in v3:
- Rebased atop (44b6d93 pinctrl: rockchip: correctly handle arguments of pinconf options)
Changes in v2:
- Greatly simplified using Tomasz's suggestion of irqd_get_trigger_type
- Moved acking out of the bank spinlock since since it's not needed.
- Linus W. has already applied parts 1 and 2, so not resending.
drivers/pinctrl/pinctrl-exynos.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
drivers/pinctrl/pinctrl-exynos.c +22 -0
@@ -84,6 +84,17 @@ static void exynos_gpio_irq_unmask(struct irq_data *irqd)unsigned long mask;unsigned long flags; +/* +* Ack level interrupts right before unmask +* +* If we don't do this we'll get a double-interrupt. Level triggered +* interrupts must not fire an interrupt if the level is not +* _currently_ active, even if it was active while the interrupt was +* masked. +*/ +if (irqd_get_trigger_type (irqd) &IRQ_TYPE_LEVEL_MASK ) +exynos_gpio_irq_ack (irqd); +spin_lock_irqsave (&bank->slock, flags); mask =readl (d->virt_base + reg_mask);
@@ -302,6 +313,17 @@ static void exynos_wkup_irq_unmask(struct irq_data *irqd)unsigned long mask;unsigned long flags; +/* +* Ack level interrupts right before unmask +* +* If we don't do this we'll get a double-interrupt. Level triggered +* interrupts must not fire an interrupt if the level is not +* _currently_ active, even if it was active while the interrupt was +* masked. +*/ +if (irqd_get_trigger_type (irqd) &IRQ_TYPE_LEVEL_MASK ) +exynos_wkup_irq_ack (irqd); +spin_lock_irqsave (&b->slock, flags); mask =readl (d->virt_base + reg_mask);
Signature · 1 line
1.8.3
Quoted 5 lines · Doug Anderson
A level-triggered interrupt should be acked after the interrupt line becomes inactive and before it is unmasked, or else another interrupt will be immediately triggered. Acking before or after calling the handler is not enough.
Quoted 7 lines
Signed-off-by Luigi Semenzato <[email protected]>Signed-off-by Doug Anderson <[email protected]>Acked-by Tomasz Figa <[email protected]>---
Changes in v3:
- Rebased atop (44b6d93 pinctrl: rockchip: correctly handle arguments of pinconf options)
OK patch applied (cleanly this time).
Yours,
Linus Walleij