xen: maintain an accurate persistent clock in more cases
Subsystems (5)
v4 cover xen: maintain an accurate persistent clock in more cases
Xen guests use the Xen wallclock as their persistent clock. This is a software only clock in the hypervisor that is used by guests instead of a real hardware RTC.
The kernel has limited support for updating the persistent clock or RTC when NTP is synced. This has the following limitations:
* The persistent clock is not updated on step changes. This leaves a window where it will be incorrect (while NTP resyncs).
* Xen guests use the Xen wallclock as their persistent clock. dom0 maintains this clock so it is persistent for domUs but not dom0 itself.
These limitations mean that guests started before NTP is synchronized will start with an incorrect wallclock time and the hardware RTC will not be updated (as on bare metal).
These series fixes the above limitations and depends on "x86: increase precision of x86_platform.get/set_wallclock()" which was previously posted.
Patch 1 is a prerequisite. It removes a call to clock_was_set() from the Xen suspend/resume code.
Changes since v3:
Add a new clock_was_set notifier chain. Use this instead of direct calls to clock_was_set() from the timekeeping code. Use this notifier and a new timer to synchronize the Xen wallclock.
Changes since v2:
Don't peek at the timekeeper internals (use __current_kernel_time() instead). Use the native set_wallclock hook in dom0.
Changes since v1:
Reworked to use the pvclock_gtod notifier to sync the wallclock (this looked similar to what a KVM host does). update_persistent_clock() will now only update the CMOS RTC.
David
PATCH v4 1/4 xen: disable non-boot VCPUs during suspend
From: David Vrabel <[email protected]>
syscore_suspend() and syscore_resume() expect there to be only one online CPU. e.g., hrtimers_resume() only triggers events for the current CPU. Xen's suspend path was leaving all VCPUs online and then attempting to fixup problems afterwards (e.g., with an explicit call to clock_was_set() to trigger pending high resolution timers).
Instead, disable non-boot CPUs before calling stop_machine() and reenable them afterwards.
This is then similar to what the kexec code does before and after a kexec jump (see kernel_kexec() in kernel/kexec.c).
--- drivers/xen/manage.c | 14 +++++++++++--- 1 files changed, 11 insertions(+), 3 deletions(-)
drivers/xen/manage.c +11 -3
@@ -148,8 +148,19 @@ static void do_suspend(void) si.post = &xen_post_suspend; } +/* +* syscore_suspend() and syscore_resume() called in +* xen_suspend() above, assume that only the boot CPU is +* online. +*/ + err =disable_nonboot_cpus (); +if (err) + goto out_resume; + err =stop_machine (xen_suspend, &si,cpumask_of (0 )); +enable_nonboot_cpus (); +dpm_resume_start (si.cancelled ?PMSG_THAW :PMSG_RESTORE );if (err) {
@@ -166,9 +177,6 @@ out_resume:dpm_resume_end (si.cancelled ?PMSG_THAW :PMSG_RESTORE ); -/* Make sure timer events get retriggered on all CPUs */ -clock_was_set (); - out_thaw: #ifdef CONFIG_PREEMPTthaw_processes ();
Signature · 1 line
1.7.2.5
PATCH v4 1/4 xen: disable non-boot VCPUs during suspend
In reply to David VrabelFrom: David Vrabel <[email protected]>
syscore_suspend() and syscore_resume() expect there to be only one online CPU. e.g., hrtimers_resume() only triggers events for the current CPU. Xen's suspend path was leaving all VCPUs online and then attempting to fixup problems afterwards (e.g., with an explicit call to clock_was_set() to trigger pending high resolution timers).
Instead, disable non-boot CPUs before calling stop_machine() and reenable them afterwards.
This is then similar to what the kexec code does before and after a kexec jump (see kernel_kexec() in kernel/kexec.c).
--- drivers/xen/manage.c | 14 +++++++++++--- 1 files changed, 11 insertions(+), 3 deletions(-)
drivers/xen/manage.c +11 -3
@@ -148,8 +148,19 @@ static void do_suspend(void) si.post = &xen_post_suspend; } +/* +* syscore_suspend() and syscore_resume() called in +* xen_suspend() above, assume that only the boot CPU is +* online. +*/ + err =disable_nonboot_cpus (); +if (err) + goto out_resume; + err =stop_machine (xen_suspend, &si,cpumask_of (0 )); +enable_nonboot_cpus (); +dpm_resume_start (si.cancelled ?PMSG_THAW :PMSG_RESTORE );if (err) {
@@ -166,9 +177,6 @@ out_resume:dpm_resume_end (si.cancelled ?PMSG_THAW :PMSG_RESTORE ); -/* Make sure timer events get retriggered on all CPUs */ -clock_was_set (); - out_thaw: #ifdef CONFIG_PREEMPTthaw_processes ();
Signature · 1 line
1.7.2.5
Re: [PATCH 1/4] xen: disable non-boot VCPUs during suspend
Quoted 8 lines · David Vrabel
From: David Vrabel <[email protected]>
syscore_suspend()andsyscore_resume()expect there to be only one online CPU. e.g.,hrtimers_resume()only triggers events for the current CPU. Xen's suspend path was leaving all VCPUs online and then attempting to fixup problems afterwards (e.g., with an explicit call toclock_was_set()to trigger pending high resolution timers).
Quoted 7 lines
Instead, disable non-boot CPUs before calling
stop_machine()and reenable them afterwards.This is then similar to what the kexec code does before and after a kexec jump (see
kernel_kexec()inkernel/kexec.c).Signed-off-by David Vrabel <[email protected]>
Looks like a bug-fix. But considering that the VCPU hotplug code in PVHVM had bugs in until v3.10 it probably shouldn't even hit stable tree.
Looks ok to me so will stick it on the 3.11 train if nobody screams.
Quoted 41 lines
--- drivers/xen/manage.c | 14 +++++++++++--- 1 files changed, 11 insertions(+), 3 deletions(-)drivers/xen/manage.c +11
-3@@ -148,8 +148,19 @@ static void do_suspend(void) si.post = &xen_post_suspend; } +/* +* syscore_suspend() and syscore_resume() called in +* xen_suspend() above, assume that only the boot CPU is +* online. +*/ + err =disable_nonboot_cpus (); +if (err) + goto out_resume; + err =stop_machine (xen_suspend, &si,cpumask_of (0 )); +enable_nonboot_cpus (); +dpm_resume_start (si.cancelled ?PMSG_THAW :PMSG_RESTORE );if (err) {@@ -166,9 +177,6 @@ out_resume:dpm_resume_end (si.cancelled ?PMSG_THAW :PMSG_RESTORE ); -/* Make sure timer events get retriggered on all CPUs */ -clock_was_set (); - out_thaw: #ifdef CONFIG_PREEMPTthaw_processes ();Signature · 1 line
1.7.2.5
Re: [PATCH 1/4] xen: disable non-boot VCPUs during suspend
In reply to David VrabelQuoted 8 lines · David Vrabel
From: David Vrabel <[email protected]>
syscore_suspend()andsyscore_resume()expect there to be only one online CPU. e.g.,hrtimers_resume()only triggers events for the current CPU. Xen's suspend path was leaving all VCPUs online and then attempting to fixup problems afterwards (e.g., with an explicit call toclock_was_set()to trigger pending high resolution timers).
Quoted 7 lines
Instead, disable non-boot CPUs before calling
stop_machine()and reenable them afterwards.This is then similar to what the kexec code does before and after a kexec jump (see
kernel_kexec()inkernel/kexec.c).Signed-off-by David Vrabel <[email protected]>
Looks like a bug-fix. But considering that the VCPU hotplug code in PVHVM had bugs in until v3.10 it probably shouldn't even hit stable tree.
Looks ok to me so will stick it on the 3.11 train if nobody screams.
Quoted 41 lines
--- drivers/xen/manage.c | 14 +++++++++++--- 1 files changed, 11 insertions(+), 3 deletions(-)drivers/xen/manage.c +11
-3@@ -148,8 +148,19 @@ static void do_suspend(void) si.post = &xen_post_suspend; } +/* +* syscore_suspend() and syscore_resume() called in +* xen_suspend() above, assume that only the boot CPU is +* online. +*/ + err =disable_nonboot_cpus (); +if (err) + goto out_resume; + err =stop_machine (xen_suspend, &si,cpumask_of (0 )); +enable_nonboot_cpus (); +dpm_resume_start (si.cancelled ?PMSG_THAW :PMSG_RESTORE );if (err) {@@ -166,9 +177,6 @@ out_resume:dpm_resume_end (si.cancelled ?PMSG_THAW :PMSG_RESTORE ); -/* Make sure timer events get retriggered on all CPUs */ -clock_was_set (); - out_thaw: #ifdef CONFIG_PREEMPTthaw_processes ();Signature · 1 line
1.7.2.5
Re: [PATCH 1/4] xen: disable non-boot VCPUs during suspend
Quoted 12 lines · Konrad Rzeszutek Wilk
Quoted 11 lines · David Vrabel
From: David Vrabel <[email protected]>
syscore_suspend()andsyscore_resume()expect there to be only one online CPU. e.g.,hrtimers_resume()only triggers events for the current CPU. Xen's suspend path was leaving all VCPUs online and then attempting to fixup problems afterwards (e.g., with an explicit call toclock_was_set()to trigger pending high resolution timers).Instead, disable non-boot CPUs before calling
stop_machine()and reenable them afterwards.
Quoted 8 lines
Quoted 4 lines
This is then similar to what the kexec code does before and after a kexec jump (see
kernel_kexec()inkernel/kexec.c).Signed-off-by David Vrabel <[email protected]>Looks like a bug-fix. But considering that the VCPU hotplug code in PVHVM had bugs in until v3.10 it probably shouldn't even hit stable tree.
I don't think actually fixes any bugs so it doesn't need to go to stable.
David
Re: [PATCH 1/4] xen: disable non-boot VCPUs during suspend
In reply to Konrad Rzeszutek WilkQuoted 12 lines · Konrad Rzeszutek Wilk
Quoted 11 lines · David Vrabel
From: David Vrabel <[email protected]>
syscore_suspend()andsyscore_resume()expect there to be only one online CPU. e.g.,hrtimers_resume()only triggers events for the current CPU. Xen's suspend path was leaving all VCPUs online and then attempting to fixup problems afterwards (e.g., with an explicit call toclock_was_set()to trigger pending high resolution timers).Instead, disable non-boot CPUs before calling
stop_machine()and reenable them afterwards.
Quoted 8 lines
Quoted 4 lines
This is then similar to what the kexec code does before and after a kexec jump (see
kernel_kexec()inkernel/kexec.c).Signed-off-by David Vrabel <[email protected]>Looks like a bug-fix. But considering that the VCPU hotplug code in PVHVM had bugs in until v3.10 it probably shouldn't even hit stable tree.
I don't think actually fixes any bugs so it doesn't need to go to stable.
David
Re: [PATCH 1/4] xen: disable non-boot VCPUs during suspend
In reply to David VrabelQuoted 9 lines
Quoted 1 line
Quoted 1 line · David Vrabel
syscore_suspend()andsyscore_resume()expect there to be only one online CPU. e.g.,hrtimers_resume()only triggers events for the current CPU. Xen's suspend path was leaving all VCPUs online and then attempting to fixup problems afterwards (e.g., with an explicit call toclock_was_set()to trigger pending high resolution timers).Instead, disable non-boot CPUs before calling
stop_machine()and reenable them afterwards.
In XenoLinux the so called "fast suspend" mode was specifically added for performance reasons, and it looks like to date pv-ops only ever supported that mode. So one question is whether there's going to be any bad performance effect from this.
The other question is that about retaining the use of stop_machine() then - it seems pretty pointless if you already bring down all other CPUs.
Jan
Re: [Xen-devel] [PATCH 1/4] xen: disable non-boot VCPUs during suspend
In reply to David VrabelQuoted 9 lines
Quoted 1 line
Quoted 1 line · David Vrabel
syscore_suspend()andsyscore_resume()expect there to be only one online CPU. e.g.,hrtimers_resume()only triggers events for the current CPU. Xen's suspend path was leaving all VCPUs online and then attempting to fixup problems afterwards (e.g., with an explicit call toclock_was_set()to trigger pending high resolution timers).Instead, disable non-boot CPUs before calling
stop_machine()and reenable them afterwards.
In XenoLinux the so called "fast suspend" mode was specifically added for performance reasons, and it looks like to date pv-ops only ever supported that mode. So one question is whether there's going to be any bad performance effect from this.
The other question is that about retaining the use of stop_machine() then - it seems pretty pointless if you already bring down all other CPUs.
Jan
Re: [PATCH 1/4] xen: disable non-boot VCPUs during suspend
Quoted 7 lines · Jan Beulich
Quoted 7 lines
Quoted 1 line
Quoted 1 line · David Vrabel
syscore_suspend()andsyscore_resume()expect there to be only one online CPU. e.g.,hrtimers_resume()only triggers events for the current CPU. Xen's suspend path was leaving all VCPUs online and then attempting to fixup problems afterwards (e.g., with an explicit call toclock_was_set()to trigger pending high resolution timers).
Quoted 7 lines
Quoted 2 lines
Instead, disable non-boot CPUs before calling
stop_machine()and reenable them afterwards.In XenoLinux the so called "fast suspend" mode was specifically added for performance reasons, and it looks like to date pv-ops only ever supported that mode. So one question is whether there's going to be any bad performance effect from this.
Yes :(
On a VM with 4 VCPUs, disable_boot_cpus() took > 200 ms.
I'll have to rethink this.
David
Re: [Xen-devel] [PATCH 1/4] xen: disable non-boot VCPUs during suspend
In reply to Jan BeulichQuoted 7 lines · Jan Beulich
Quoted 7 lines
Quoted 1 line
Quoted 1 line · David Vrabel
syscore_suspend()andsyscore_resume()expect there to be only one online CPU. e.g.,hrtimers_resume()only triggers events for the current CPU. Xen's suspend path was leaving all VCPUs online and then attempting to fixup problems afterwards (e.g., with an explicit call toclock_was_set()to trigger pending high resolution timers).
Quoted 7 lines
Quoted 2 lines
Instead, disable non-boot CPUs before calling
stop_machine()and reenable them afterwards.In XenoLinux the so called "fast suspend" mode was specifically added for performance reasons, and it looks like to date pv-ops only ever supported that mode. So one question is whether there's going to be any bad performance effect from this.
Yes :(
On a VM with 4 VCPUs, disable_boot_cpus() took > 200 ms.
I'll have to rethink this.
David
PATCH v4 2/4 time: add a notifier chain for when the system time is stepped
In reply to David VrabelFrom: David Vrabel <[email protected]>
The high resolution timer code gets notified of step changes to the system time with clock_was_set() or clock_was_set_delayed() calls. If other parts of the kernel require similar notification there is no clear place to hook into.
Add a clock_was_set atomic notifier chain (clock_was_set_notifier_list) and call this in place of clock_was_set(). If the timekeeping locks are held, the calls are deferred to a new tasklet.
The hrtimer code adds a notifier block to this chain and uses it to call (the now internal) clock_was_set(). Since the timekeeping code does not call the chain from the timer irq clock_was_set_delayed() and associated code can be removed.
--- include/linux/hrtimer.h | 7 ------- include/linux/time.h | 5 +++++ kernel/hrtimer.c | 33 ++++++++++++++------------------- kernel/time/timekeeping.c | 34 +++++++++++++++++++++++++--------- 4 files changed, 44 insertions(+), 35 deletions(-)
include/linux/hrtimer.h +0 -7
@@ -166,7 +166,6 @@ enum hrtimer_base_type {* @lock: lock protecting the base and associated clock bases * and timers * @active_bases: Bitfield to mark bases with active timers -* @clock_was_set: Indicates that clock was set from irq context. * @expires_next: absolute time of the next event which was scheduled * via clock_set_next_event() * @hres_active: State of high resolution mode
@@ -180,7 +179,6 @@ enum hrtimer_base_type {struct hrtimer_cpu_base {raw_spinlock_t lock;unsigned int active_bases; -unsigned int clock_was_set;#ifdef CONFIG_HIGH_RES_TIMERS ktime_t expires_next;int hres_active;
@@ -289,8 +287,6 @@ extern void hrtimer_peek_ahead_timers(void);# define MONOTONIC_RES_NSEC HIGH_RES_NSEC# define KTIME_MONOTONIC_RES KTIME_HIGH_RES -extern void clock_was_set_delayed (void ); -#else # define MONOTONIC_RES_NSEC LOW_RES_NSEC
@@ -312,11 +308,8 @@ static inline int hrtimer_is_hres_active(struct hrtimer *timer) return 0; } -static inline void clock_was_set_delayed (void ) { } -#endif -extern void clock_was_set (void );#ifdef CONFIG_TIMERFD extern void timerfd_clock_was_set (void );#else
include/linux/time.h +5 -0
@@ -185,6 +185,11 @@ struct tms;extern void do_sys_times (struct tms *);/* +* Notifier chain called when system time is stepped. +*/ +extern struct atomic_notifier_head clock_was_set_notifier_list; + +/* * Similar to the struct tm in userspace <time.h>, but it needs to be here so * that the kernel source is self contained. */
kernel/hrtimer.c +14 -19
@@ -721,19 +721,6 @@ static int hrtimer_switch_to_hres(void) return 1; } -/* -* Called from timekeeping code to reprogramm the hrtimer interrupt -* device. If called from the timer interrupt context we defer it to -* softirq context. -*/ -void clock_was_set_delayed (void ) -{ -struct hrtimer_cpu_base *cpu_base = &__get_cpu_var (hrtimer_bases); - - cpu_base->clock_was_set =1 ; -__raise_softirq_irqoff (HRTIMER_SOFTIRQ ); -} -#else static inline int hrtimer_hres_active (void ) {return 0 ; }
@@ -762,7 +749,7 @@ static inline void retrigger_next_event(void *arg) { }* resolution timer interrupts. On UP we just disable interrupts and * call the high resolution interrupt code. */ -void clock_was_set (void ) +static void clock_was_set (void ) {#ifdef CONFIG_HIGH_RES_TIMERS /* Retrigger the CPU local events everywhere */
@@ -1434,11 +1421,6 @@ static void run_hrtimer_softirq(struct softirq_action *h) {struct hrtimer_cpu_base *cpu_base = &__get_cpu_var (hrtimer_bases); -if (cpu_base->clock_was_set) { - cpu_base->clock_was_set =0 ; -clock_was_set (); - } -hrtimer_peek_ahead_timers (); }
@@ -1776,11 +1758,24 @@ static struct notifier_block __cpuinitdata hrtimers_nb = { .notifier_call = hrtimer_cpu_notify, }; +static int hrtimer_clock_was_set_notify (struct notifier_block *self, +unsigned long action,void *data) +{ +clock_was_set (); +return NOTIFY_OK ; +} + +static struct notifier_block hrtimers_clock_was_set_nb = { + .notifier_call = hrtimer_clock_was_set_notify, +}; +void __init hrtimers_init (void ) {hrtimer_cpu_notify (&hrtimers_nb, (unsigned long )CPU_UP_PREPARE , (void *)(long )smp_processor_id ());register_cpu_notifier (&hrtimers_nb); +atomic_notifier_chain_register (&clock_was_set_notifier_list, + &hrtimers_clock_was_set_nb);#ifdef CONFIG_HIGH_RES_TIMERS open_softirq (HRTIMER_SOFTIRQ , run_hrtimer_softirq);#endif
kernel/time/timekeeping.c +25 -9
@@ -198,6 +198,25 @@ static inline s64 timekeeping_get_ns_raw(struct timekeeper *tk)return nsec +get_arch_timeoffset (); } +ATOMIC_NOTIFIER_HEAD (clock_was_set_notifier_list); +EXPORT_SYMBOL_GPL (clock_was_set_notifier_list); + +static void timekeeping_clock_was_set (void ) +{ +atomic_notifier_call_chain (&clock_was_set_notifier_list,0 ,NULL ); +} + +static void timekeeping_clock_was_set_task (unsigned long d) +{ +timekeeping_clock_was_set (); +} +DECLARE_TASKLET (clock_was_set_tasklet, timekeeping_clock_was_set_task,0 ); + +static void timekeeping_clock_was_set_delayed (void ) +{ +tasklet_schedule (&clock_was_set_tasklet); +} +static RAW_NOTIFIER_HEAD (pvclock_gtod_chain);static void update_pvclock_gtod (struct timekeeper *tk)
@@ -513,8 +532,7 @@ int do_settimeofday(const struct timespec *tv)write_seqcount_end (&timekeeper_seq);raw_spin_unlock_irqrestore (&timekeeper_lock, flags); -/* signal hrtimers about time change */ -clock_was_set (); +timekeeping_clock_was_set ();return 0 ; }
@@ -557,8 +575,7 @@ error: /* even if we error out, we forwarded the time, so call update */write_seqcount_end (&timekeeper_seq);raw_spin_unlock_irqrestore (&timekeeper_lock, flags); -/* signal hrtimers about time change */ -clock_was_set (); +timekeeping_clock_was_set ();return ret; }
@@ -607,7 +624,7 @@ void timekeeping_set_tai_offset(s32 tai_offset)__timekeeping_set_tai_offset (tk, tai_offset);write_seqcount_end (&timekeeper_seq);raw_spin_unlock_irqrestore (&timekeeper_lock, flags); -clock_was_set (); +timekeeping_clock_was_set (); }/**
@@ -877,8 +894,7 @@ void timekeeping_inject_sleeptime(struct timespec *delta)write_seqcount_end (&timekeeper_seq);raw_spin_unlock_irqrestore (&timekeeper_lock, flags); -/* signal hrtimers about time change */ -clock_was_set (); +timekeeping_clock_was_set (); }/**
@@ -1260,7 +1276,7 @@ static inline void accumulate_nsecs_to_secs(struct timekeeper *tk)__timekeeping_set_tai_offset (tk, tk->tai_offset - leap); -clock_was_set_delayed (); +timekeeping_clock_was_set_delayed (); } } }
@@ -1677,7 +1693,7 @@ int do_adjtimex(struct timex *txc)if (tai != orig_tai) {__timekeeping_set_tai_offset (tk, tai); -clock_was_set_delayed (); +timekeeping_clock_was_set_delayed (); }write_seqcount_end (&timekeeper_seq);raw_spin_unlock_irqrestore (&timekeeper_lock, flags);
Signature · 1 line
1.7.2.5
PATCH v4 2/4 time: add a notifier chain for when the system time is stepped
In reply to David VrabelFrom: David Vrabel <[email protected]>
The high resolution timer code gets notified of step changes to the system time with clock_was_set() or clock_was_set_delayed() calls. If other parts of the kernel require similar notification there is no clear place to hook into.
Add a clock_was_set atomic notifier chain (clock_was_set_notifier_list) and call this in place of clock_was_set(). If the timekeeping locks are held, the calls are deferred to a new tasklet.
The hrtimer code adds a notifier block to this chain and uses it to call (the now internal) clock_was_set(). Since the timekeeping code does not call the chain from the timer irq clock_was_set_delayed() and associated code can be removed.
--- include/linux/hrtimer.h | 7 ------- include/linux/time.h | 5 +++++ kernel/hrtimer.c | 33 ++++++++++++++------------------- kernel/time/timekeeping.c | 34 +++++++++++++++++++++++++--------- 4 files changed, 44 insertions(+), 35 deletions(-)
include/linux/hrtimer.h +0 -7
@@ -166,7 +166,6 @@ enum hrtimer_base_type {* @lock: lock protecting the base and associated clock bases * and timers * @active_bases: Bitfield to mark bases with active timers -* @clock_was_set: Indicates that clock was set from irq context. * @expires_next: absolute time of the next event which was scheduled * via clock_set_next_event() * @hres_active: State of high resolution mode
@@ -180,7 +179,6 @@ enum hrtimer_base_type {struct hrtimer_cpu_base {raw_spinlock_t lock;unsigned int active_bases; -unsigned int clock_was_set;#ifdef CONFIG_HIGH_RES_TIMERS ktime_t expires_next;int hres_active;
@@ -289,8 +287,6 @@ extern void hrtimer_peek_ahead_timers(void);# define MONOTONIC_RES_NSEC HIGH_RES_NSEC# define KTIME_MONOTONIC_RES KTIME_HIGH_RES -extern void clock_was_set_delayed (void ); -#else # define MONOTONIC_RES_NSEC LOW_RES_NSEC
@@ -312,11 +308,8 @@ static inline int hrtimer_is_hres_active(struct hrtimer *timer) return 0; } -static inline void clock_was_set_delayed (void ) { } -#endif -extern void clock_was_set (void );#ifdef CONFIG_TIMERFD extern void timerfd_clock_was_set (void );#else
include/linux/time.h +5 -0
@@ -185,6 +185,11 @@ struct tms;extern void do_sys_times (struct tms *);/* +* Notifier chain called when system time is stepped. +*/ +extern struct atomic_notifier_head clock_was_set_notifier_list; + +/* * Similar to the struct tm in userspace <time.h>, but it needs to be here so * that the kernel source is self contained. */
kernel/hrtimer.c +14 -19
@@ -721,19 +721,6 @@ static int hrtimer_switch_to_hres(void) return 1; } -/* -* Called from timekeeping code to reprogramm the hrtimer interrupt -* device. If called from the timer interrupt context we defer it to -* softirq context. -*/ -void clock_was_set_delayed (void ) -{ -struct hrtimer_cpu_base *cpu_base = &__get_cpu_var (hrtimer_bases); - - cpu_base->clock_was_set =1 ; -__raise_softirq_irqoff (HRTIMER_SOFTIRQ ); -} -#else static inline int hrtimer_hres_active (void ) {return 0 ; }
@@ -762,7 +749,7 @@ static inline void retrigger_next_event(void *arg) { }* resolution timer interrupts. On UP we just disable interrupts and * call the high resolution interrupt code. */ -void clock_was_set (void ) +static void clock_was_set (void ) {#ifdef CONFIG_HIGH_RES_TIMERS /* Retrigger the CPU local events everywhere */
@@ -1434,11 +1421,6 @@ static void run_hrtimer_softirq(struct softirq_action *h) {struct hrtimer_cpu_base *cpu_base = &__get_cpu_var (hrtimer_bases); -if (cpu_base->clock_was_set) { - cpu_base->clock_was_set =0 ; -clock_was_set (); - } -hrtimer_peek_ahead_timers (); }
@@ -1776,11 +1758,24 @@ static struct notifier_block __cpuinitdata hrtimers_nb = { .notifier_call = hrtimer_cpu_notify, }; +static int hrtimer_clock_was_set_notify (struct notifier_block *self, +unsigned long action,void *data) +{ +clock_was_set (); +return NOTIFY_OK ; +} + +static struct notifier_block hrtimers_clock_was_set_nb = { + .notifier_call = hrtimer_clock_was_set_notify, +}; +void __init hrtimers_init (void ) {hrtimer_cpu_notify (&hrtimers_nb, (unsigned long )CPU_UP_PREPARE , (void *)(long )smp_processor_id ());register_cpu_notifier (&hrtimers_nb); +atomic_notifier_chain_register (&clock_was_set_notifier_list, + &hrtimers_clock_was_set_nb);#ifdef CONFIG_HIGH_RES_TIMERS open_softirq (HRTIMER_SOFTIRQ , run_hrtimer_softirq);#endif
kernel/time/timekeeping.c +25 -9
@@ -198,6 +198,25 @@ static inline s64 timekeeping_get_ns_raw(struct timekeeper *tk)return nsec +get_arch_timeoffset (); } +ATOMIC_NOTIFIER_HEAD (clock_was_set_notifier_list); +EXPORT_SYMBOL_GPL (clock_was_set_notifier_list); + +static void timekeeping_clock_was_set (void ) +{ +atomic_notifier_call_chain (&clock_was_set_notifier_list,0 ,NULL ); +} + +static void timekeeping_clock_was_set_task (unsigned long d) +{ +timekeeping_clock_was_set (); +} +DECLARE_TASKLET (clock_was_set_tasklet, timekeeping_clock_was_set_task,0 ); + +static void timekeeping_clock_was_set_delayed (void ) +{ +tasklet_schedule (&clock_was_set_tasklet); +} +static RAW_NOTIFIER_HEAD (pvclock_gtod_chain);static void update_pvclock_gtod (struct timekeeper *tk)
@@ -513,8 +532,7 @@ int do_settimeofday(const struct timespec *tv)write_seqcount_end (&timekeeper_seq);raw_spin_unlock_irqrestore (&timekeeper_lock, flags); -/* signal hrtimers about time change */ -clock_was_set (); +timekeeping_clock_was_set ();return 0 ; }
@@ -557,8 +575,7 @@ error: /* even if we error out, we forwarded the time, so call update */write_seqcount_end (&timekeeper_seq);raw_spin_unlock_irqrestore (&timekeeper_lock, flags); -/* signal hrtimers about time change */ -clock_was_set (); +timekeeping_clock_was_set ();return ret; }
@@ -607,7 +624,7 @@ void timekeeping_set_tai_offset(s32 tai_offset)__timekeeping_set_tai_offset (tk, tai_offset);write_seqcount_end (&timekeeper_seq);raw_spin_unlock_irqrestore (&timekeeper_lock, flags); -clock_was_set (); +timekeeping_clock_was_set (); }/**
@@ -877,8 +894,7 @@ void timekeeping_inject_sleeptime(struct timespec *delta)write_seqcount_end (&timekeeper_seq);raw_spin_unlock_irqrestore (&timekeeper_lock, flags); -/* signal hrtimers about time change */ -clock_was_set (); +timekeeping_clock_was_set (); }/**
@@ -1260,7 +1276,7 @@ static inline void accumulate_nsecs_to_secs(struct timekeeper *tk)__timekeeping_set_tai_offset (tk, tk->tai_offset - leap); -clock_was_set_delayed (); +timekeeping_clock_was_set_delayed (); } } }
@@ -1677,7 +1693,7 @@ int do_adjtimex(struct timex *txc)if (tai != orig_tai) {__timekeeping_set_tai_offset (tk, tai); -clock_was_set_delayed (); +timekeeping_clock_was_set_delayed (); }write_seqcount_end (&timekeeper_seq);raw_spin_unlock_irqrestore (&timekeeper_lock, flags);
Signature · 1 line
1.7.2.5
Re: [PATCH 2/4] time: add a notifier chain for when the system time is stepped
Quoted 12 lines · David Vrabel
From: David Vrabel <[email protected]>
The high resolution timer code gets notified of step changes to the system time with
clock_was_set()orclock_was_set_delayed()calls. If other parts of the kernel require similar notification there is no clear place to hook into.Add a
clock_was_setatomic notifier chain (clock_was_set_notifier_list) and call this in place ofclock_was_set(). If the timekeeping locks are held, the calls are deferred to a new tasklet.
Quoted 4 lines
The hrtimer code adds a notifier block to this chain and uses it to call (the now internal)
clock_was_set(). Since the timekeeping code does not call the chain from the timer irqclock_was_set_delayed()and associated code can be removed.
So on my initial quick review, this *looks* pretty reasonable. I get a little worried about interface abuse (ie: random drivers trying to hook into clock_was_set_notifier_list), but we can move that into timekeeper_internal.h or something similar to limit that.
The other issue here is we've been burned pretty badly in the past with changes to clock_was_set(), as its key to keeping timers in line with timekeeping. So this will need a fair amount of testing and run time before this gets merged, so 3.12 is what we'd be targeting at the earliest (its getting a bit late for taking changes for 3.11 anyway).
If you want to try to push patch 1/4 in for 3.11 via the Xen tree, I'll see about queuing the other three for hopefully 3.12.
thanks
-john
Re: [PATCH 2/4] time: add a notifier chain for when the system time is stepped
In reply to David VrabelQuoted 12 lines · David Vrabel
From: David Vrabel <[email protected]>
The high resolution timer code gets notified of step changes to the system time with
clock_was_set()orclock_was_set_delayed()calls. If other parts of the kernel require similar notification there is no clear place to hook into.Add a
clock_was_setatomic notifier chain (clock_was_set_notifier_list) and call this in place ofclock_was_set(). If the timekeeping locks are held, the calls are deferred to a new tasklet.
Quoted 4 lines
The hrtimer code adds a notifier block to this chain and uses it to call (the now internal)
clock_was_set(). Since the timekeeping code does not call the chain from the timer irqclock_was_set_delayed()and associated code can be removed.
So on my initial quick review, this *looks* pretty reasonable. I get a little worried about interface abuse (ie: random drivers trying to hook into clock_was_set_notifier_list), but we can move that into timekeeper_internal.h or something similar to limit that.
The other issue here is we've been burned pretty badly in the past with changes to clock_was_set(), as its key to keeping timers in line with timekeeping. So this will need a fair amount of testing and run time before this gets merged, so 3.12 is what we'd be targeting at the earliest (its getting a bit late for taking changes for 3.11 anyway).
If you want to try to push patch 1/4 in for 3.11 via the Xen tree, I'll see about queuing the other three for hopefully 3.12.
thanks
-john
Re: [PATCH 2/4] time: add a notifier chain for when the system time is stepped
Quoted 23 lines · John Stultz
Quoted 12 lines · David Vrabel
From: David Vrabel <[email protected]>
The high resolution timer code gets notified of step changes to the system time with
clock_was_set()orclock_was_set_delayed()calls. If other parts of the kernel require similar notification there is no clear place to hook into.Add a
clock_was_setatomic notifier chain (clock_was_set_notifier_list) and call this in place ofclock_was_set(). If the timekeeping locks are held, the calls are deferred to a new tasklet.Quoted 4 lines
The hrtimer code adds a notifier block to this chain and uses it to call (the now internal)
clock_was_set(). Since the timekeeping code does not call the chain from the timer irqclock_was_set_delayed()and associated code can be removed.So on my initial quick review, this *looks* pretty reasonable. I get a little worried about interface abuse (ie: random drivers trying to hook into
clock_was_set_notifier_list), but we can move that intotimekeeper_internal.hor something similar to limit that.
Quoted 6 lines
The other issue here is we've been burned pretty badly in the past with changes to
clock_was_set(), as its key to keeping timers in line with timekeeping. So this will need a fair amount of testing and run time before this gets merged, so 3.12 is what we'd be targeting at the earliest (its getting a bit late for taking changes for 3.11 anyway).
I think we have four weeks left? Or you think Linus is going to release at the end of the month?
Quoted 2 lines
If you want to try to push patch 1/4 in for 3.11 via the Xen tree,
Done.
Quoted 1 line
I'll see about queuing the other three for hopefully 3.12.
OK, let me run them through the testing gauntleet to have the warm fuzzy feeling.
Quoted 4 lines
thanks
-john
Re: [PATCH 2/4] time: add a notifier chain for when the system time is stepped
In reply to John StultzQuoted 23 lines · John Stultz
Quoted 12 lines · David Vrabel
From: David Vrabel <[email protected]>
The high resolution timer code gets notified of step changes to the system time with
clock_was_set()orclock_was_set_delayed()calls. If other parts of the kernel require similar notification there is no clear place to hook into.Add a
clock_was_setatomic notifier chain (clock_was_set_notifier_list) and call this in place ofclock_was_set(). If the timekeeping locks are held, the calls are deferred to a new tasklet.Quoted 4 lines
The hrtimer code adds a notifier block to this chain and uses it to call (the now internal)
clock_was_set(). Since the timekeeping code does not call the chain from the timer irqclock_was_set_delayed()and associated code can be removed.So on my initial quick review, this *looks* pretty reasonable. I get a little worried about interface abuse (ie: random drivers trying to hook into
clock_was_set_notifier_list), but we can move that intotimekeeper_internal.hor something similar to limit that.
Quoted 6 lines
The other issue here is we've been burned pretty badly in the past with changes to
clock_was_set(), as its key to keeping timers in line with timekeeping. So this will need a fair amount of testing and run time before this gets merged, so 3.12 is what we'd be targeting at the earliest (its getting a bit late for taking changes for 3.11 anyway).
I think we have four weeks left? Or you think Linus is going to release at the end of the month?
Quoted 2 lines
If you want to try to push patch 1/4 in for 3.11 via the Xen tree,
Done.
Quoted 1 line
I'll see about queuing the other three for hopefully 3.12.
OK, let me run them through the testing gauntleet to have the warm fuzzy feeling.
Quoted 4 lines
thanks
-john
Re: [PATCH 2/4] time: add a notifier chain for when the system time is stepped
Quoted 23 lines · Konrad Rzeszutek Wilk
Quoted 22 lines · John Stultz
Quoted 12 lines · David Vrabel
From: David Vrabel <[email protected]>
The high resolution timer code gets notified of step changes to the system time with
clock_was_set()orclock_was_set_delayed()calls. If other parts of the kernel require similar notification there is no clear place to hook into.Add a
clock_was_setatomic notifier chain (clock_was_set_notifier_list) and call this in place ofclock_was_set(). If the timekeeping locks are held, the calls are deferred to a new tasklet.Quoted 4 lines
The hrtimer code adds a notifier block to this chain and uses it to call (the now internal)
clock_was_set(). Since the timekeeping code does not call the chain from the timer irqclock_was_set_delayed()and associated code can be removed.So on my initial quick review, this *looks* pretty reasonable. I get a little worried about interface abuse (ie: random drivers trying to hook into
clock_was_set_notifier_list), but we can move that intotimekeeper_internal.hor something similar to limit that.
Quoted 8 lines
Quoted 6 lines
The other issue here is we've been burned pretty badly in the past with changes to
clock_was_set(), as its key to keeping timers in line with timekeeping. So this will need a fair amount of testing and run time before this gets merged, so 3.12 is what we'd be targeting at the earliest (its getting a bit late for taking changes for 3.11 anyway).I think we have four weeks left? Or you think Linus is going to release at the end of the month?
Well, I have to queue it, and then get Thomas to pull it from me, and that can take some time. And after -rc6 there's just not a lot of time for things to get testing in -next before being pushed to Linus. Its just a bit rushed for me.
Quoted 5 lines
Quoted 1 line
If you want to try to push patch 1/4 in for 3.11 via the Xen tree,
Done.
Quoted 1 line
I'll see about queuing the other three for hopefully 3.12.
OK, let me run them through the testing gauntleet to have the warm fuzzy feeling.
Thanks. I'll be running it through my test cases as well.
-john
Re: [PATCH 2/4] time: add a notifier chain for when the system time is stepped
In reply to Konrad Rzeszutek WilkQuoted 23 lines · Konrad Rzeszutek Wilk
Quoted 22 lines · John Stultz
Quoted 12 lines · David Vrabel
From: David Vrabel <[email protected]>
The high resolution timer code gets notified of step changes to the system time with
clock_was_set()orclock_was_set_delayed()calls. If other parts of the kernel require similar notification there is no clear place to hook into.Add a
clock_was_setatomic notifier chain (clock_was_set_notifier_list) and call this in place ofclock_was_set(). If the timekeeping locks are held, the calls are deferred to a new tasklet.Quoted 4 lines
The hrtimer code adds a notifier block to this chain and uses it to call (the now internal)
clock_was_set(). Since the timekeeping code does not call the chain from the timer irqclock_was_set_delayed()and associated code can be removed.So on my initial quick review, this *looks* pretty reasonable. I get a little worried about interface abuse (ie: random drivers trying to hook into
clock_was_set_notifier_list), but we can move that intotimekeeper_internal.hor something similar to limit that.
Quoted 8 lines
Quoted 6 lines
The other issue here is we've been burned pretty badly in the past with changes to
clock_was_set(), as its key to keeping timers in line with timekeeping. So this will need a fair amount of testing and run time before this gets merged, so 3.12 is what we'd be targeting at the earliest (its getting a bit late for taking changes for 3.11 anyway).I think we have four weeks left? Or you think Linus is going to release at the end of the month?
Well, I have to queue it, and then get Thomas to pull it from me, and that can take some time. And after -rc6 there's just not a lot of time for things to get testing in -next before being pushed to Linus. Its just a bit rushed for me.
Quoted 5 lines
Quoted 1 line
If you want to try to push patch 1/4 in for 3.11 via the Xen tree,
Done.
Quoted 1 line
I'll see about queuing the other three for hopefully 3.12.
OK, let me run them through the testing gauntleet to have the warm fuzzy feeling.
Thanks. I'll be running it through my test cases as well.
-john
Re: [PATCH 2/4] time: add a notifier chain for when the system time is stepped
In reply to John StultzQuoted 18 lines · John Stultz
Quoted 12 lines · David Vrabel
From: David Vrabel <[email protected]>
The high resolution timer code gets notified of step changes to the system time with
clock_was_set()orclock_was_set_delayed()calls. If other parts of the kernel require similar notification there is no clear place to hook into.Add a
clock_was_setatomic notifier chain (clock_was_set_notifier_list) and call this in place ofclock_was_set(). If the timekeeping locks are held, the calls are deferred to a new tasklet.Quoted 4 lines
The hrtimer code adds a notifier block to this chain and uses it to call (the now internal)
clock_was_set(). Since the timekeeping code does not call the chain from the timer irqclock_was_set_delayed()and associated code can be removed.
Quoted 4 lines
So on my initial quick review, this *looks* pretty reasonable. I get a little worried about interface abuse (ie: random drivers trying to hook into
clock_was_set_notifier_list), but we can move that intotimekeeper_internal.hor something similar to limit that.
I can move the actual list to time.c but we still need to provide a register_clock_was_set_notifier() call in linux/time.h as the two current users (Xen and hrtimers) don't include and probably should not include timekeeper_internal.h.
Quoted 5 lines
The other issue here is we've been burned pretty badly in the past with changes to
clock_was_set(), as its key to keeping timers in line with timekeeping. So this will need a fair amount of testing and run time before this gets merged, so 3.12 is what we'd be targeting at the earliest (its getting a bit late for taking changes for 3.11 anyway).
hrtimer's clock_was_set() is called at the same point in the non-delayed case.
For the delayed case, it used to be called at the beginning of the hrtimer softirq and now it is called from a tasklet, but if I understand this correctly, the tasklet softirq will be called before the hrtimer one so this should give the same behaviour.
Quoted 2 lines
If you want to try to push patch 1/4 in for 3.11 via the Xen tree, I'll see about queuing the other three for hopefully 3.12.
3.12 is fine. I'd prefer to have a correct and well-tested fix merged.
David
Re: [PATCH 2/4] time: add a notifier chain for when the system time is stepped
In reply to John StultzQuoted 18 lines · John Stultz
Quoted 12 lines · David Vrabel
From: David Vrabel <[email protected]>
The high resolution timer code gets notified of step changes to the system time with
clock_was_set()orclock_was_set_delayed()calls. If other parts of the kernel require similar notification there is no clear place to hook into.Add a
clock_was_setatomic notifier chain (clock_was_set_notifier_list) and call this in place ofclock_was_set(). If the timekeeping locks are held, the calls are deferred to a new tasklet.Quoted 4 lines
The hrtimer code adds a notifier block to this chain and uses it to call (the now internal)
clock_was_set(). Since the timekeeping code does not call the chain from the timer irqclock_was_set_delayed()and associated code can be removed.
Quoted 4 lines
So on my initial quick review, this *looks* pretty reasonable. I get a little worried about interface abuse (ie: random drivers trying to hook into
clock_was_set_notifier_list), but we can move that intotimekeeper_internal.hor something similar to limit that.
I can move the actual list to time.c but we still need to provide a register_clock_was_set_notifier() call in linux/time.h as the two current users (Xen and hrtimers) don't include and probably should not include timekeeper_internal.h.
Quoted 5 lines
The other issue here is we've been burned pretty badly in the past with changes to
clock_was_set(), as its key to keeping timers in line with timekeeping. So this will need a fair amount of testing and run time before this gets merged, so 3.12 is what we'd be targeting at the earliest (its getting a bit late for taking changes for 3.11 anyway).
hrtimer's clock_was_set() is called at the same point in the non-delayed case.
For the delayed case, it used to be called at the beginning of the hrtimer softirq and now it is called from a tasklet, but if I understand this correctly, the tasklet softirq will be called before the hrtimer one so this should give the same behaviour.
Quoted 2 lines
If you want to try to push patch 1/4 in for 3.11 via the Xen tree, I'll see about queuing the other three for hopefully 3.12.
3.12 is fine. I'd prefer to have a correct and well-tested fix merged.
David
PATCH v4 3/4 x86/xen: sync the wallclock when the system time is stepped
In reply to David VrabelFrom: David Vrabel <[email protected]>
The Xen wallclock is a software only clock within the Xen hypervisor that is used by: a) PV guests as the equivalent of a hardware RTC; and
b) the hypervisor as the clock source for the emulated RTC provided to HVM guests.
Currently the Xen wallclock is only updated every 11 minutes if NTP is synchronized to its clock source. If a guest is started before NTP is synchronized it may see an incorrect wallclock time.
Use the clock_was_set notifier chain to receive a notification when the system time is stepped and update the wallclock to match the current system time.
--- arch/x86/xen/time.c | 24 ++++++++++++++++++++++++ 1 files changed, 24 insertions(+), 0 deletions(-)
arch/x86/xen/time.c +24 -0
@@ -211,6 +211,26 @@ static int xen_set_wallclock(const struct timespec *now)return HYPERVISOR_dom0_op (&op); } + +static int xen_clock_was_set_notify (struct notifier_block *nb,unsigned long unused, +void *priv) +{ +struct timespec now; +int ret; + +/* +* Set the Xen wallclock from Linux system time. +*/ + now =current_kernel_time (); +xen_set_wallclock (&now); + +return NOTIFY_OK ; +} + +static struct notifier_block xen_clock_was_set_notifier = { + .notifier_call = xen_clock_was_set_notify, +}; +static struct clocksource xen_clocksource__read_mostly = { .name ="xen" ,
@@ -473,6 +493,10 @@ static void __init xen_time_init(void)xen_setup_runstate_info (cpu);xen_setup_timer (cpu);xen_setup_cpu_clockevents (); + +if (xen_initial_domain ()) +atomic_notifier_chain_register (&clock_was_set_notifier_list, + &xen_clock_was_set_notifier); }void __init xen_init_time_ops (void )
Signature · 1 line
1.7.2.5
PATCH v4 3/4 x86/xen: sync the wallclock when the system time is stepped
In reply to David VrabelFrom: David Vrabel <[email protected]>
The Xen wallclock is a software only clock within the Xen hypervisor that is used by: a) PV guests as the equivalent of a hardware RTC; and
b) the hypervisor as the clock source for the emulated RTC provided to HVM guests.
Currently the Xen wallclock is only updated every 11 minutes if NTP is synchronized to its clock source. If a guest is started before NTP is synchronized it may see an incorrect wallclock time.
Use the clock_was_set notifier chain to receive a notification when the system time is stepped and update the wallclock to match the current system time.
--- arch/x86/xen/time.c | 24 ++++++++++++++++++++++++ 1 files changed, 24 insertions(+), 0 deletions(-)
arch/x86/xen/time.c +24 -0
@@ -211,6 +211,26 @@ static int xen_set_wallclock(const struct timespec *now)return HYPERVISOR_dom0_op (&op); } + +static int xen_clock_was_set_notify (struct notifier_block *nb,unsigned long unused, +void *priv) +{ +struct timespec now; +int ret; + +/* +* Set the Xen wallclock from Linux system time. +*/ + now =current_kernel_time (); +xen_set_wallclock (&now); + +return NOTIFY_OK ; +} + +static struct notifier_block xen_clock_was_set_notifier = { + .notifier_call = xen_clock_was_set_notify, +}; +static struct clocksource xen_clocksource__read_mostly = { .name ="xen" ,
@@ -473,6 +493,10 @@ static void __init xen_time_init(void)xen_setup_runstate_info (cpu);xen_setup_timer (cpu);xen_setup_cpu_clockevents (); + +if (xen_initial_domain ()) +atomic_notifier_chain_register (&clock_was_set_notifier_list, + &xen_clock_was_set_notifier); }void __init xen_init_time_ops (void )
Signature · 1 line
1.7.2.5
Re: [PATCH 3/4] x86/xen: sync the wallclock when the system time is stepped
arch/x86/xen/time.c static int xen_set_wallclock(const struct timespec *now) · line 219
Quoted 13 lines
Quoted 1 line
Quoted 1 line · David Vrabel
arch/x86/xen/time.c +6
-0@@ -211,6 +211,26 @@ static int xen_set_wallclock(const struct timespec *now)return HYPERVISOR_dom0_op (&op); } + +static int xen_clock_was_set_notify (struct notifier_block *nb,unsigned long unused, +void *priv) +{ +struct timespec now; +int ret;
Unused variable.
Jan
Quoted 17 lines
arch/x86/xen/time.c +14
-0+ +/* +* Set the Xen wallclock from Linux system time. +*/ + now =current_kernel_time (); +xen_set_wallclock (&now); + +return NOTIFY_OK ; +} + +static struct notifier_block xen_clock_was_set_notifier = { + .notifier_call = xen_clock_was_set_notify, +}; +static struct clocksource xen_clocksource__read_mostly = { .name ="xen" ,
Re: [Xen-devel] [PATCH 3/4] x86/xen: sync the wallclock when the system time is stepped
In reply to David Vrabelarch/x86/xen/time.c static int xen_set_wallclock(const struct timespec *now) · line 219
Quoted 13 lines
Quoted 1 line
Quoted 1 line · David Vrabel
arch/x86/xen/time.c +6
-0@@ -211,6 +211,26 @@ static int xen_set_wallclock(const struct timespec *now)return HYPERVISOR_dom0_op (&op); } + +static int xen_clock_was_set_notify (struct notifier_block *nb,unsigned long unused, +void *priv) +{ +struct timespec now; +int ret;
Unused variable.
Jan
Quoted 17 lines
arch/x86/xen/time.c +14
-0+ +/* +* Set the Xen wallclock from Linux system time. +*/ + now =current_kernel_time (); +xen_set_wallclock (&now); + +return NOTIFY_OK ; +} + +static struct notifier_block xen_clock_was_set_notifier = { + .notifier_call = xen_clock_was_set_notify, +}; +static struct clocksource xen_clocksource__read_mostly = { .name ="xen" ,
PATCH v4 4/4 x86/xen: sync the CMOS RTC as well as the Xen wallclock
In reply to David VrabelFrom: David Vrabel <[email protected]>
Adjustments to Xen's persistent clock via update_persistent_clock() don't actually persist, as the Xen wallclock is a software only clock and modifications to it do not modify the underlying CMOS RTC.
The x86_platform.set_wallclock hook can be used to keep the hardware RTC synchronized (as on bare metal). Because the Xen wallclock is now kept synchronized by the clock_was_set notifier and a new timer, xen_set_wallclock() need not do this and dom0 can simply use the native implementation.
--- arch/x86/xen/time.c | 49 +++++++++++++++++++++++++++++++------------------ 1 files changed, 31 insertions(+), 18 deletions(-)
arch/x86/xen/time.c +31 -18
@@ -198,39 +198,50 @@ static void xen_get_wallclock(struct timespec *now)static int xen_set_wallclock (const struct timespec *now) { +return -1 ; +} + +static void xen_wallclock_timer_func (unsigned long d); +static DEFINE_TIMER(xen_wallclock_timer, xen_wallclock_timer_func, 0, 0); + +static void xen_sync_wallclock (void ) +{ +struct timespec now;struct xen_platform_op op; -/* do nothing for domU */ -if (!xen_initial_domain ()) -return -1 ; + now =current_kernel_time (); op.cmd = XENPF_settime; - op.u.settime.secs = now->tv_sec; - op.u.settime.nsecs = now->tv_nsec; + op.u.settime.secs = now.tv_sec; + op.u.settime.nsecs = now.tv_nsec; op.u.settime.system_time =xen_clocksource_read (); -return HYPERVISOR_dom0_op (&op); + (void )HYPERVISOR_dom0_op (&op); + +/* +* Use a timer to correct for any drift in the Xen +* wallclock. +* +* 11 minutes is the same period as sync_cmos_clock(). +*/ +mod_timer (&xen_wallclock_timer,round_jiffies (jiffies +11 *60 *HZ )); } - +static int xen_clock_was_set_notify (struct notifier_block *nb,unsigned long unused,void *priv) { -struct timespec now; -int ret; - -/* -* Set the Xen wallclock from Linux system time. -*/ - now =current_kernel_time (); -xen_set_wallclock (&now); - -return NOTIFY_OK ; +xen_sync_wallclock (); +return NOTIFY_OK ; }static struct notifier_block xen_clock_was_set_notifier = { .notifier_call = xen_clock_was_set_notify, }; +static void xen_wallclock_timer_func (unsigned long d) +{ +xen_sync_wallclock (); +}static struct clocksource xen_clocksource__read_mostly = { .name ="xen" ,
@@ -509,7 +520,9 @@ void __init xen_init_time_ops(void) x86_platform.calibrate_tsc = xen_tsc_khz; x86_platform.get_wallclock = xen_get_wallclock; - x86_platform.set_wallclock = xen_set_wallclock; +/* Dom0 uses the native method to set the hardware RTC. */ +if (!xen_initial_domain ()) + x86_platform.set_wallclock = xen_set_wallclock; }#ifdef CONFIG_XEN_PVHVM
Signature · 1 line
1.7.2.5
PATCH v4 4/4 x86/xen: sync the CMOS RTC as well as the Xen wallclock
In reply to David VrabelFrom: David Vrabel <[email protected]>
Adjustments to Xen's persistent clock via update_persistent_clock() don't actually persist, as the Xen wallclock is a software only clock and modifications to it do not modify the underlying CMOS RTC.
The x86_platform.set_wallclock hook can be used to keep the hardware RTC synchronized (as on bare metal). Because the Xen wallclock is now kept synchronized by the clock_was_set notifier and a new timer, xen_set_wallclock() need not do this and dom0 can simply use the native implementation.
--- arch/x86/xen/time.c | 49 +++++++++++++++++++++++++++++++------------------ 1 files changed, 31 insertions(+), 18 deletions(-)
arch/x86/xen/time.c +31 -18
@@ -198,39 +198,50 @@ static void xen_get_wallclock(struct timespec *now)static int xen_set_wallclock (const struct timespec *now) { +return -1 ; +} + +static void xen_wallclock_timer_func (unsigned long d); +static DEFINE_TIMER(xen_wallclock_timer, xen_wallclock_timer_func, 0, 0); + +static void xen_sync_wallclock (void ) +{ +struct timespec now;struct xen_platform_op op; -/* do nothing for domU */ -if (!xen_initial_domain ()) -return -1 ; + now =current_kernel_time (); op.cmd = XENPF_settime; - op.u.settime.secs = now->tv_sec; - op.u.settime.nsecs = now->tv_nsec; + op.u.settime.secs = now.tv_sec; + op.u.settime.nsecs = now.tv_nsec; op.u.settime.system_time =xen_clocksource_read (); -return HYPERVISOR_dom0_op (&op); + (void )HYPERVISOR_dom0_op (&op); + +/* +* Use a timer to correct for any drift in the Xen +* wallclock. +* +* 11 minutes is the same period as sync_cmos_clock(). +*/ +mod_timer (&xen_wallclock_timer,round_jiffies (jiffies +11 *60 *HZ )); } - +static int xen_clock_was_set_notify (struct notifier_block *nb,unsigned long unused,void *priv) { -struct timespec now; -int ret; - -/* -* Set the Xen wallclock from Linux system time. -*/ - now =current_kernel_time (); -xen_set_wallclock (&now); - -return NOTIFY_OK ; +xen_sync_wallclock (); +return NOTIFY_OK ; }static struct notifier_block xen_clock_was_set_notifier = { .notifier_call = xen_clock_was_set_notify, }; +static void xen_wallclock_timer_func (unsigned long d) +{ +xen_sync_wallclock (); +}static struct clocksource xen_clocksource__read_mostly = { .name ="xen" ,
@@ -509,7 +520,9 @@ void __init xen_init_time_ops(void) x86_platform.calibrate_tsc = xen_tsc_khz; x86_platform.get_wallclock = xen_get_wallclock; - x86_platform.set_wallclock = xen_set_wallclock; +/* Dom0 uses the native method to set the hardware RTC. */ +if (!xen_initial_domain ()) + x86_platform.set_wallclock = xen_set_wallclock; }#ifdef CONFIG_XEN_PVHVM
Signature · 1 line
1.7.2.5