OMAP5: Fix gpio_bank_54xx setting
Subsystems (2)
PATCH 1/2 OMAP5: Fix gpio_bank_54xx setting
OMAP54XX and DRA7XX SoCs have 8 banks per 32 GPIOs, that is, 256 in total. Fix the gpio bank setting.
--- arch/arm/cpu/armv7/omap5/hwinit.c | 4 +++- arch/arm/include/asm/arch-omap5/gpio.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-)
arch/arm/cpu/armv7/omap5/hwinit.c +3 -1
@@ -43,13 +43,15 @@ DECLARE_GLOBAL_DATA_PTR;u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV ; -static struct gpio_bank gpio_bank_54xx[6 ] = { +static struct gpio_bank gpio_bank_54xx[8 ] = { { (void *)OMAP54XX_GPIO1_BASE ,METHOD_GPIO_24XX }, { (void *)OMAP54XX_GPIO2_BASE ,METHOD_GPIO_24XX }, { (void *)OMAP54XX_GPIO3_BASE ,METHOD_GPIO_24XX }, { (void *)OMAP54XX_GPIO4_BASE ,METHOD_GPIO_24XX }, { (void *)OMAP54XX_GPIO5_BASE ,METHOD_GPIO_24XX }, { (void *)OMAP54XX_GPIO6_BASE ,METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO7_BASE ,METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO8_BASE ,METHOD_GPIO_24XX }, };const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
arch/arm/include/asm/arch-omap5/gpio.h +2 -0
@@ -46,5 +46,7 @@#define OMAP54XX_GPIO4_BASE 0x48059000#define OMAP54XX_GPIO5_BASE 0x4805B000#define OMAP54XX_GPIO6_BASE 0x4805D000 +#define OMAP54XX_GPIO7_BASE 0x48051000 +#define OMAP54XX_GPIO8_BASE 0x48053000#endif /* _GPIO_OMAP5_H */
Signature · 1 line
1.8.1.2
PATCH 2/2 OMAP: gpio: Introduce get_omap_gpio_count() function to get gpio count
Now the omap_gpio driver is used by AM33XX, OMAP3/4, OMAP54XX and DRA7XX SoCs. These SoCs have various gpio count. Thus introduce get_omap_gpio_count() function to get correct gpio count.
--- arch/arm/cpu/armv7/am33xx/board.c | 5 +++++ arch/arm/cpu/armv7/omap3/board.c | 5 +++++ arch/arm/cpu/armv7/omap4/hwinit.c | 5 +++++ arch/arm/cpu/armv7/omap5/hwinit.c | 5 +++++ arch/arm/include/asm/omap_gpio.h | 1 + drivers/gpio/omap_gpio.c | 2 +- 6 files changed, 22 insertions(+), 1 deletion(-)
arch/arm/cpu/armv7/am33xx/board.c +5 -0
@@ -51,6 +51,11 @@ static const struct gpio_bank gpio_bank_am33xx[4] = {const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; +unsigned int get_omap_gpio_count (void ) +{ +return ARRAY_SIZE (gpio_bank_am33xx) *32 ; +} +#if defined(CONFIG_OMAP_HSMMC ) && !defined(CONFIG_SPL_BUILD )int cpu_mmc_init (bd_t *bis) {
arch/arm/cpu/armv7/omap3/board.c +5 -0
@@ -65,6 +65,11 @@ static const struct gpio_bank gpio_bank_34xx[6] = {const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx; +unsigned int get_omap_gpio_count (void ) +{ +return ARRAY_SIZE (gpio_bank_34xx) *32 ; +} +#ifdef CONFIG_SPL_BUILD /* * We use static variables because global data is not ready yet.
arch/arm/cpu/armv7/omap4/hwinit.c +5 -0
@@ -51,6 +51,11 @@ static const struct gpio_bank gpio_bank_44xx[6] = {const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; +unsigned int get_omap_gpio_count (void ) +{ +return ARRAY_SIZE (gpio_bank_44xx) *32 ; +} +#ifdef CONFIG_SPL_BUILD /* * Some tuning of IOs for optimal power and performance
arch/arm/cpu/armv7/omap5/hwinit.c +5 -0
@@ -56,6 +56,11 @@ static struct gpio_bank gpio_bank_54xx[8] = {const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; +unsigned int get_omap_gpio_count (void ) +{ +return ARRAY_SIZE (gpio_bank_54xx) *32 ; +} +#ifdef CONFIG_SPL_BUILD /* LPDDR2 specific IO settings */ static void io_settings_lpddr2 (void )
arch/arm/include/asm/omap_gpio.h +1 -0
@@ -46,6 +46,7 @@ struct gpio_bank { };extern const struct gpio_bank *const omap_gpio_bank; +extern unsigned int get_omap_gpio_count (void );#define METHOD_GPIO_24XX 4
drivers/gpio/omap_gpio.c +1 -1
@@ -55,7 +55,7 @@ static inline int get_gpio_index(int gpio)int gpio_is_valid (int gpio) { -return (gpio >=0 ) && (gpio <192 ); +return (gpio >=0 ) && (gpio <get_omap_gpio_count ()); }static int check_gpio (int gpio)
Signature · 1 line
1.8.1.2
PATCH 2/2 OMAP: gpio: Introduce get_omap_gpio_count() function to get gpio count
Axel,
Why do you introduce a function when this stuff is constant and known to the compiler? Just put a #define in every header. You are now uselessly inflating code...
Regards,
Lubo
Quoted 104 lines · Axel Lin
Now the
omap_gpiodriver is used by AM33XX, OMAP3/4, OMAP54XX and DRA7XX SoCs. These SoCs have various gpio count. Thus introduceget_omap_gpio_count()function to get correct gpio count.Signed-off-by Axel Lin <[email protected]>--- arch/arm/cpu/armv7/am33xx/board.c | 5 +++++ arch/arm/cpu/armv7/omap3/board.c | 5 +++++ arch/arm/cpu/armv7/omap4/hwinit.c | 5 +++++ arch/arm/cpu/armv7/omap5/hwinit.c | 5 +++++ arch/arm/include/asm/omap_gpio.h | 1 + drivers/gpio/omap_gpio.c | 2 +- 6 files changed, 22 insertions(+), 1 deletion(-)arch/arm/cpu/armv7/am33xx/board.c +5
-0@@ -51,6 +51,11 @@ static const struct gpio_bank gpio_bank_am33xx[4] = {const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; +unsigned int get_omap_gpio_count (void ) +{ +return ARRAY_SIZE (gpio_bank_am33xx) *32 ; +} +#if defined(CONFIG_OMAP_HSMMC ) && !defined(CONFIG_SPL_BUILD )int cpu_mmc_init (bd_t *bis) {arch/arm/cpu/armv7/omap3/board.c +5
-0@@ -65,6 +65,11 @@ static const struct gpio_bank gpio_bank_34xx[6] = {const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx; +unsigned int get_omap_gpio_count (void ) +{ +return ARRAY_SIZE (gpio_bank_34xx) *32 ; +} +#ifdef CONFIG_SPL_BUILD /* * We use static variables because global data is not ready yet. arch/arm/cpu/armv7/omap4/hwinit.c +5
-0@@ -51,6 +51,11 @@ static const struct gpio_bank gpio_bank_44xx[6] = {const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; +unsigned int get_omap_gpio_count (void ) +{ +return ARRAY_SIZE (gpio_bank_44xx) *32 ; +} +#ifdef CONFIG_SPL_BUILD /* * Some tuning of IOs for optimal power and performance arch/arm/cpu/armv7/omap5/hwinit.c +5
-0@@ -56,6 +56,11 @@ static struct gpio_bank gpio_bank_54xx[8] = {const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; +unsigned int get_omap_gpio_count (void ) +{ +return ARRAY_SIZE (gpio_bank_54xx) *32 ; +} +#ifdef CONFIG_SPL_BUILD /* LPDDR2 specific IO settings */ static void io_settings_lpddr2 (void )arch/arm/include/asm/omap_gpio.h +1
-0@@ -46,6 +46,7 @@ struct gpio_bank { };extern const struct gpio_bank *const omap_gpio_bank; +extern unsigned int get_omap_gpio_count (void );#define METHOD_GPIO_24XX 4drivers/gpio/omap_gpio.c +1
-1@@ -55,7 +55,7 @@ static inline int get_gpio_index(int gpio)int gpio_is_valid (int gpio) { -return (gpio >=0 ) && (gpio <192 ); +return (gpio >=0 ) && (gpio <get_omap_gpio_count ()); }static int check_gpio (int gpio)