drm: Added SDP and VSC structures for handling PSR for eDP
Subsystems (2)
PATCH 1/11 drm: Added SDP and VSC structures for handling PSR for eDP
From: Shobhit Kumar <[email protected]>
SDP header and SDP VSC header as per eDP 1.3 spec, section 3.5, chapter "PSR Secondary Data Package Support".
v2: Modified and corrected the structures to be more in line for kernel coding guidelines and rebased the code on Paulo's DP patchset
v3: removing unecessary identation at DP_RECEIVER_CAP_SIZE
v4: moving them to include/drm/drm_dp_helper.h and also already
icluding EDP_PSR_RECEIVER_CAP_SIZE to add everything needed for PSR at once at drm_dp_helper.h
v5: Fix SDP VSC header and identation by (Paulo Zanoni) and
remove i915 from title (Daniel Vetter)
v6: Fix spec version and move comments from code to commit message
since numbers might change in the future (by Paulo Zanoni).
--- include/drm/drm_dp_helper.h | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)
include/drm/drm_dp_helper.h +30 -1
@@ -342,13 +342,42 @@ u8 drm_dp_get_adjust_request_voltage(u8 link_status[DP_LINK_STATUS_SIZE],u8 drm_dp_get_adjust_request_pre_emphasis (u8 link_status[DP_LINK_STATUS_SIZE ],int lane); -#define DP_RECEIVER_CAP_SIZE 0xf +#define DP_RECEIVER_CAP_SIZE 0xf +#define EDP_PSR_RECEIVER_CAP_SIZE 2 +void drm_dp_link_train_clock_recovery_delay (u8 dpcd[DP_RECEIVER_CAP_SIZE ]);void drm_dp_link_train_channel_eq_delay (u8 dpcd[DP_RECEIVER_CAP_SIZE ]);u8 drm_dp_link_rate_to_bw_code (int link_rate);int drm_dp_bw_code_to_link_rate (u8 link_bw); +struct edp_sdp_header { +u8 HB0;/* Secondary Data Packet ID */ +u8 HB1;/* Secondary Data Packet Type */ +u8 HB2;/* 7:5 reserved, 4:0 revision number */ +u8 HB3;/* 7:5 reserved, 4:0 number of valid data bytes */ +} __packed; + +#define EDP_SDP_HEADER_REVISION_MASK 0x1F +#define EDP_SDP_HEADER_VALID_PAYLOAD_BYTES 0x1F + +struct edp_vsc_psr { +struct edp_sdp_header sdp_header; +u8 DB0;/* Stereo Interface */ +u8 DB1;/* 0 - PSR State; 1 - Update RFB; 2 - CRC Valid */ +u8 DB2;/* CRC value bits 7:0 of the R or Cr component */ +u8 DB3;/* CRC value bits 15:8 of the R or Cr component */ +u8 DB4;/* CRC value bits 7:0 of the G or Y component */ +u8 DB5;/* CRC value bits 15:8 of the G or Y component */ +u8 DB6;/* CRC value bits 7:0 of the B or Cb component */ +u8 DB7;/* CRC value bits 15:8 of the B or Cb component */ +u8 DB8_31[24 ];/* Reserved */ +} __packed; + +#define EDP_VSC_PSR_STATE_ACTIVE (1<<0) +#define EDP_VSC_PSR_UPDATE_RFB (1<<1) +#define EDP_VSC_PSR_CRC_VALUES_VALID (1<<2) +static inline int drm_dp_max_link_rate (u8 dpcd[DP_RECEIVER_CAP_SIZE ]) {
Signature · 1 line
1.8.1.4