Skip to contentSkip to conversation

wmi service ready event not received

DISCUSSION Nikolay Dyatchenko 2 participants 3 messages Jul 10, 2013 – Jul 11, 2013 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

Hello!

I try use mini pci-e card (from WDR-7500) with firmware for hw1.0, but i get error "wmi service ready event not received":
[root@localhost ~]# lspci | grep Atheros
02:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev 01)
03:00.0 Network controller: Atheros Communications Inc. Device 003c
[root@localhost ~]# dmesg | grep ath10

[ 34.712886] ath10k_pci 0000:03:00.0: BAR 0: assigned [mem 0xc0600000-0xc07fffff 64bit]
[ 34.713762] ath10k: MSI-X didn't succeed (1), trying MSI
[ 34.713820] ath10k_pci 0000:03:00.0: irq 48 for MSI/MSI-X
[ 34.713896] ath10k: MSI interrupt handling
[ 34.742881] ath10k: Hardware name qca988x hw1.0 version 0x4000002c
[ 38.377544] ath10k: UART prints disabled
[ 38.382971] ath10k: HTC Service HTT Data does not allocate target credits
[ 38.384918] ath10k: Unknown eventid: 32768
[ 43.388470] ath10k: wmi service ready event not received
[ 43.389917] ath10k: could not register driver core (-110)
[ 43.390241] ath10k_pci: probe of 0000:03:00.0 failed with error -110

I'ts normal situation? I get firmware for hw1.0 from Archer C7 tp-link firmware.

wbr,
Nikolay Dyatchenko
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#1 lore raw
Quoted 17 lines · Nikolay Dyatchenko

I try use mini pci-e card (from WDR-7500) with firmware for hw1.0, but i get error "wmi service ready event not received":
[root@localhost ~]# lspci | grep Atheros
02:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev 01)
03:00.0 Network controller: Atheros Communications Inc. Device 003c
[root@localhost ~]# dmesg | grep ath10

[ 34.712886] ath10k_pci 0000:03:00.0: BAR 0: assigned [mem 0xc0600000-0xc07fffff 64bit]
[ 34.713762] ath10k: MSI-X didn't succeed (1), trying MSI
[ 34.713820] ath10k_pci 0000:03:00.0: irq 48 for MSI/MSI-X
[ 34.713896] ath10k: MSI interrupt handling
[ 34.742881] ath10k: Hardware name qca988x hw1.0 version 0x4000002c
[ 38.377544] ath10k: UART prints disabled
[ 38.382971] ath10k: HTC Service HTT Data does not allocate target credits
[ 38.384918] ath10k: Unknown eventid: 32768
[ 43.388470] ath10k: wmi service ready event not received
[ 43.389917] ath10k: could not register driver core (-110)
[ 43.390241] ath10k_pci: probe of 0000:03:00.0 failed with error -110
Quoted 1 line

I'ts normal situation? I get firmware for hw1.0 from Archer C7 tp-link firmware.

The unknown event id 32768 implies that you are using wrong firmware version. Where did you get it?

Signature · 6 lines
Kalle Valo

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#2 lore raw

I extract firmware from TP-Link Archer C7 firmware (http://www.tp-link.com/lk/support/download/?model=Archer+C7&version=V1#tbl_j). Firmware for hardware v.1.0 placed in module umac.ko (.data section). In .symtab section in this module i found link for objects: athwlan_bin=firmware.bin, raw_Data=board.bin and otp_bin=otp.bin.
Pci-e card i get from TP-Link WDR-7500 and Archer C7 have the same card.
And i see (maybe) wrong define QCA988X_1_0_DEVICE_ID in pci.c (0xabcd). Maybe problem with this?

Четверг, 11 июля 2013, 11:52 +03:00 от Kalle Valo <[email protected]>:

Quoted 19 lines
Quoted 17 lines · Nikolay Dyatchenko

I try use mini pci-e card (from WDR-7500) with firmware for hw1.0, but i get error "wmi service ready event not received":
[root@localhost ~]# lspci | grep Atheros
02:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev 01)
03:00.0 Network controller: Atheros Communications Inc. Device 003c
[root@localhost ~]# dmesg | grep ath10

[ 34.712886] ath10k_pci 0000:03:00.0: BAR 0: assigned [mem 0xc0600000-0xc07fffff 64bit]
[ 34.713762] ath10k: MSI-X didn't succeed (1), trying MSI
[ 34.713820] ath10k_pci 0000:03:00.0: irq 48 for MSI/MSI-X
[ 34.713896] ath10k: MSI interrupt handling
[ 34.742881] ath10k: Hardware name qca988x hw1.0 version 0x4000002c
[ 38.377544] ath10k: UART prints disabled
[ 38.382971] ath10k: HTC Service HTT Data does not allocate target credits
[ 38.384918] ath10k: Unknown eventid: 32768
[ 43.388470] ath10k: wmi service ready event not received
[ 43.389917] ath10k: could not register driver core (-110)
[ 43.390241] ath10k_pci: probe of 0000:03:00.0 failed with error -110
Quoted 13 lines
Quoted 1 line

I'ts normal situation? I get firmware for hw1.0 from Archer C7 tp-link firmware.

The unknown event id 32768 implies that you are using wrong firmware version. Where did you get it?

Signature · 6 lines
Kalle Valo

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

wbr,
Nikolay Dyatchenko
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k