drm/i915: Don't call encoder's get_config unless encoder is active
Subsystems (2)
PATCH 1/1 drm/i915: Don't call encoder's get_config unless encoder is active
From: Ville Syrjälä <[email protected]>
The SDVO code tries to compare the encoder's and crtc's idea of the pixel_multiplier. Normally they have to match, but when transitioning to DPMS off, we turn off the pipe before reading out the pipe_config, so the pixel_multiplier in the pipe_config will be 0, whereas the encoder will still have its pixel_multiplier set to whatever value we were using when the display was active. This leads to a warning from intel_modeset_check_state().
WARNING: CPU: 1 PID: 2846 at drivers/gpu/drm/i915/intel_sdvo.c:1378 intel_sdvo_get_config+0x158/0x160() SDVO pixel multiplier mismatch, port: 0, encoder: 1 Modules linked in: snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep CPU: 1 PID: 2846 Comm: Xorg Not tainted 3.11.0-rc3-00208-gbe1e8d7-dirty #19 Hardware name: Apple Computer, Inc. Macmini1,1/Mac-F4208EC8, BIOS MM11.88Z.0055.B03.0604071521 04/07/06 00000000 00000000 ef0afa54 c1597bbb c1737ea4 ef0afa84 c10392ca c1737e6c ef0afab0 00000b1e c1737ea4 00000562 c12dfbe8 c12dfbe8 ef0afb14 00000000 f697ec00 ef0afa9c c103936e 00000009 ef0afa94 c1737e6c ef0afab0 ef0afadc Call Trace: [<c1597bbb>] dump_stack+0x41/0x56 [<c10392ca>] warn_slowpath_common+0x7a/0xa0 [<c103936e>] warn_slowpath_fmt+0x2e/0x30 [<c12dfbe8>] intel_sdvo_get_config+0x158/0x160 [<c12c3220>] check_crtc_state+0x1e0/0xb10 [<c12cdc7d>] intel_modeset_check_state+0x29d/0x7c0 [<c12dfe5c>] intel_sdvo_dpms+0x5c/0xa0 [<c12985de>] drm_mode_obj_set_property_ioctl+0x40e/0x420 [<c1298625>] drm_mode_connector_property_set_ioctl+0x35/0x40 [<c1289294>] drm_ioctl+0x3e4/0x540 [<c10fc1a2>] do_vfs_ioctl+0x72/0x570 [<c10fc72f>] SyS_ioctl+0x8f/0xa0 [<c159b7fa>] sysenter_do_call+0x12/0x22 ---[ end trace 7ce940aff1366d60 ]---
Fix the problem by skipping the encoder get_config() function for inactive encoders.
--- drivers/gpu/drm/i915/intel_display.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_display.c +3 -1
@@ -8556,9 +8556,11 @@ check_crtc_state(struct drm_device *dev)list_for_each_entry (encoder, &dev->mode_config.encoder_list, base.head) { +enum pipe pipe;if (encoder->base.crtc != &crtc->base)continue ; -if (encoder->get_config) +if (encoder->get_config && + encoder->get_hw_state (encoder, &pipe)) encoder->get_config (encoder, &pipe_config); }
Signature · 6 lines
1.8.1.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Daniel Vetter
AppliedQuoted 34 lines · On Mon, Aug 05, 2013 at 05:57:48PM +0300, [email protected] wrote:
From: Ville Syrjälä <[email protected]>
The SDVO code tries to compare the encoder's and crtc's idea of the
pixel_multiplier. Normally they have to match, but when transitioning to DPMS off, we turn off the pipe before reading out thepipe_config, so thepixel_multiplierin thepipe_configwill be 0, whereas the encoder will still have itspixel_multiplierset to whatever value we were using when the display was active. This leads to a warning fromintel_modeset_check_state().WARNING: CPU: 1 PID: 2846 at drivers/gpu/drm/i915/intel_sdvo.c:1378 intel_sdvo_get_config+0x158/0x160() SDVO pixel multiplier mismatch, port: 0, encoder: 1 Modules linked in: snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep CPU: 1 PID: 2846 Comm: Xorg Not tainted 3.11.0-rc3-00208-gbe1e8d7-dirty #19 Hardware name: Apple Computer, Inc. Macmini1,1/Mac-F4208EC8, BIOS MM11.88Z.0055.B03.0604071521 04/07/06 00000000 00000000 ef0afa54 c1597bbb c1737ea4 ef0afa84 c10392ca c1737e6c ef0afab0 00000b1e c1737ea4 00000562 c12dfbe8 c12dfbe8 ef0afb14 00000000 f697ec00 ef0afa9c c103936e 00000009 ef0afa94 c1737e6c ef0afab0 ef0afadc Call Trace: [<c1597bbb>] dump_stack+0x41/0x56 [<c10392ca>] warn_slowpath_common+0x7a/0xa0 [<c103936e>] warn_slowpath_fmt+0x2e/0x30 [<c12dfbe8>] intel_sdvo_get_config+0x158/0x160 [<c12c3220>] check_crtc_state+0x1e0/0xb10 [<c12cdc7d>] intel_modeset_check_state+0x29d/0x7c0 [<c12dfe5c>] intel_sdvo_dpms+0x5c/0xa0 [<c12985de>] drm_mode_obj_set_property_ioctl+0x40e/0x420 [<c1298625>] drm_mode_connector_property_set_ioctl+0x35/0x40 [<c1289294>] drm_ioctl+0x3e4/0x540 [<c10fc1a2>] do_vfs_ioctl+0x72/0x570 [<c10fc72f>] SyS_ioctl+0x8f/0xa0 [<c159b7fa>] sysenter_do_call+0x12/0x22 ---[ end trace 7ce940aff1366d60 ]---
Quoted 5 lines
Fix the problem by skipping the encoder
get_config()function for inactive encoders.Tested-by Linus Torvalds <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>
Picked up for -fixes, thanks for the patch.
-Daniel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch