Signal loss rtl8723ae wifi driver
Hi all,
I have a rtl8723ae wifi card on my laptop. When connecting to any wifi Access Point the wifi signal fluctuates from full strength to very low. In order to connect and stay connected I must be no farther than two meters from my router otherwise I get disconnected. I have tried the kernel driver on multiple distros as well as the vendor drivers for older kernel versions. All seem to have the same problem. The card works ok on Windows 7 with vendor drivers. I have also tried compiling backports-3.10-rc1-2 with no luck. During a signal loss period I get no logs but if I take the laptop too far from the AP dmesg reports:
[ 764.163774] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx [ 764.192783] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 764.200572] wlp3s0: authenticated [ 764.203290] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3) [ 764.225178] wlp3s0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x411 status=0 aid=2) [ 764.225452] wlp3s0: associated [ 764.225459] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 772.036168] wlp3s0: deauthenticated from xx:xx:xx:xx:xx:xx (Reason: 15) [ 772.077800] cfg80211: Calling CRDA to update world regulatory domain [ 775.286474] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx [ 775.315559] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 775.321158] wlp3s0: authenticated [ 775.322689] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3) [ 775.426155] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 2/3) [ 775.529550] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 3/3) [ 775.633015] wlp3s0: association with xx:xx:xx:xx:xx:xx timed out [ 786.622957] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx [ 786.651896] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 786.662445] wlp3s0: authenticated [ 786.665720] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3) [ 786.673076] wlp3s0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x411 status=0 aid=2) [ 786.673305] wlp3s0: associated [ 814.496149] wlp3s0: Connection to AP xx:xx:xx:xx:xx:xx lost [ 814.589627] cfg80211: Calling CRDA to update world regulatory domain [ 815.974548] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx [ 816.003540] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 816.012928] wlp3s0: authenticated [ 816.014009] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3) [ 816.117439] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 2/3) [ 816.220847] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 3/3) [ 816.324220] wlp3s0: association with xx:xx:xx:xx:xx:xx timed out [ 817.806001] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx [ 817.835045] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 817.935652] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 2/3) [ 818.039082] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 3/3) [ 818.142458] wlp3s0: authentication with xx:xx:xx:xx:xx:xx timed out [ 820.148096] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx [ 820.177057] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 820.183705] wlp3s0: authenticated [ 820.184179] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3) [ 820.287650] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 2/3) [ 820.391074] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 3/3) [ 820.494461] wlp3s0: association with xx:xx:xx:xx:xx:xx timed out [ 826.476820] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx [ 826.505764] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 826.606337] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 2/3) [ 826.709744] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 3/3) [ 826.813199] wlp3s0: authentication with xx:xx:xx:xx:xx:xx timed out [ 837.813007] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx [ 837.842080] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 837.857000] wlp3s0: authenticated [ 837.859229] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3) [ 837.866815] wlp3s0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x411 status=0 aid=2) [ 837.867038] wlp3s0: associated [ 845.599874] wlp3s0: deauthenticated from xx:xx:xx:xx:xx:xx (Reason: 15) [ 845.627330] cfg80211: Calling CRDA to update world regulatory domain [ 857.376412] wlp3s0: authenticate with xx:xx:xx:xx:xx:xx [ 857.405387] wlp3s0: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 857.410017] wlp3s0: authenticated [ 857.412546] wlp3s0: associate with xx:xx:xx:xx:xx:xx (try 1/3) [ 857.415665] wlp3s0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x411 status=0 aid=2) [ 857.415902] wlp3s0: associated
The issue is exactly the same as discribed here:
http://askubuntu.com/questions/289414/rtl8723ae-driver-problem-ubuntu-13-04
Does anyone know what might be wrong?
Cheers for the help.
Quoted 10 lines · Phillip Moss
Hi all,
I have a rtl8723ae wifi card on my laptop. When connecting to any wifi Access Point the wifi signal fluctuates from full strength to very low. In order to connect and stay connected I must be no farther than two meters from my router otherwise I get disconnected. I have tried the kernel driver on multiple distros as well as the vendor drivers for older kernel versions. All seem to have the same problem. The card works ok on Windows 7 with vendor drivers. I have also tried compiling backports-3.10-rc1-2 with no luck. During a signal loss period I get no logs but if I take the laptop too far from the AP dmesg reports:
You should report this on the linux-wireless mailing list and Cc the maintainers, specially if using a more up to date release of the driver.
Luis