*** Add Microchip MCP3422/3/4 high resolution ADC ***
PATCH v2 1/1 *** Add Microchip MCP3422/3/4 high resolution ADC ***
This patch add support for Microchip MCP3422/3/4 high resolution adc.
http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf
This review maintain the correct alphabetic order in Makefile and Kconfig and fixes some minor codestyle issues.
I' will be grateful to anyone who wants to review it.
Thank you!
Angelo Compagnucci (1):
Add mcp3422 kernel driver
drivers/iio/adc/Kconfig | 10 ++ drivers/iio/adc/Makefile | 1 + drivers/iio/adc/mcp3422.c | 400 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 411 insertions(+) create mode 100644 drivers/iio/adc/mcp3422.c
Signature · 1 line
1.7.9.5
PATCH 1/1 Add mcp3422 kernel driver
--- drivers/iio/adc/Kconfig | 10 ++ drivers/iio/adc/Makefile | 1 + drivers/iio/adc/mcp3422.c | 400 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 411 insertions(+) create mode 100644 drivers/iio/adc/mcp3422.c
drivers/iio/adc/Kconfig +10 -0
@@ -143,6 +143,16 @@ config MCP320X This driver can also be built as a module. If so, the module will be called mcp320x. +config MCP3422 + tristate "Microchip Technology MCP3422/3/4 driver" + depends on I2C + help + Say yes here to build support for Microchip Technology's MCP3422, + MCP3423 or MCP3424 analog to digital converters. + + This driver can also be built as a module. If so, the module will be + called mcp3422. + config TI_ADC081C tristate "Texas Instruments ADC081C021/027" depends on I2C
drivers/iio/adc/Makefile +1 -0
@@ -15,6 +15,7 @@ obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_MAX1363) += max1363.o obj-$(CONFIG_MCP320X) += mcp320x.o +obj-$(CONFIG_MCP3422) += mcp3422.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o
drivers/iio/adc/mcp3422.c new file +400 -0
400 lines not on this page · raw message
Signature · 1 line
1.7.9.5
Re: [PATCH] Add mcp3422 kernel driver
Quoted 5 lines
drivers/iio/adc/Kconfig | 10 ++ drivers/iio/adc/Makefile | 1 + drivers/iio/adc/mcp3422.c | 400 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 411 insertions(+) create mode 100644 drivers/iio/adc/mcp3422.c
an I2C ADC, yeah, like!
comments inline
Quoted 40 lines
drivers/iio/adc/Kconfig +10
-0@@ -143,6 +143,16 @@ config MCP320X This driver can also be built as a module. If so, the module will be called mcp320x. +config MCP3422 + tristate "Microchip Technology MCP3422/3/4 driver" + depends on I2C + help + Say yes here to build support for Microchip Technology's MCP3422, + MCP3423 or MCP3424 analog to digital converters. + + This driver can also be built as a module. If so, the module will be + called mcp3422. + config TI_ADC081C tristate "Texas Instruments ADC081C021/027" depends on I2Cdrivers/iio/adc/Makefile +1
-0@@ -15,6 +15,7 @@ obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_MAX1363) += max1363.o obj-$(CONFIG_MCP320X) += mcp320x.o +obj-$(CONFIG_MCP3422) += mcp3422.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.odrivers/iio/adc/mcp3422.c new file +0
-0
drivers/iio/adc/mcp3422.c line 9
Quoted 9 lines
drivers/iio/adc/mcp3422.c new file +9
-0@@ -0,0 +1,400 @@ +/* +* mcp3422.c - driver for the Microchip mcp3422/3/4 chip family +* +* Copyright (C) 2013, Angelo Compagnucci +* Author: Angelo Compagnucci <[email protected]> +* +* Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf +* +* This driver export the value of analog input voltage to sysfs, the
exports
Quoted 28 lines
drivers/iio/adc/mcp3422.c new file +28
-0+* voltage unit is nV. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +*/ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/sysfs.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +/* Masks */ +#define MCP3422_CHANNEL_MASK 0x60 +#define MCP3422_PGA_MASK 0x03 +#define MCP3422_SRATE_MASK 0x0C +#define MCP3422_SRATE_240 0x0 +#define MCP3422_SRATE_60 0x1 +#define MCP3422_SRATE_15 0x2 +#define MCP3422_SRATE_3 0x3 + +#define MCP3422_CHANNEL (config) (((config) & MCP3422_CHANNEL_MASK) >> 5) +#define MCP3422_PGA (config) ((config) & MCP3422_PGA_MASK)
drivers/iio/adc/mcp3422.c line 47
Quoted 10 lines
drivers/iio/adc/mcp3422.c new file +10
-0+#define MCP3422_SAMPLE_RATE (config) (((config) & MCP3422_SRATE_MASK) >> 2) + +#define VREF 2048 + +#define MCP3422_CHAN (index) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = index, \ + .address = index, \
address is not used
drivers/iio/adc/mcp3422.c line 48
Quoted 1 line
drivers/iio/adc/mcp3422.c new file +1
-0+ .scan_index = index, \
scan index is not used
drivers/iio/adc/mcp3422.c line 58
Quoted 10 lines
drivers/iio/adc/mcp3422.c new file +10
-0+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + } + +/* LSB is in nV to eliminate floating point */ +static const u32 rates_to_lsb[] = {1000000 ,250000 ,62500 ,15625 }; + +/* +* Client data (each client gets its own) +*/
single line comment
drivers/iio/adc/mcp3422.c line 66
Quoted 8 lines
drivers/iio/adc/mcp3422.c new file +8
-0+struct mcp3422 { +struct i2c_client *i2c; +u8 config; +}; + +static int mcp3422_update_config (struct mcp3422 *adc) +{ +u8 buf[1 ];
maybe just 'u8 buf' ?
Quoted 30 lines
drivers/iio/adc/mcp3422.c new file +30
-0+ buf[0 ] = adc->config; +return i2c_master_send (adc->i2c, buf,1 ); +} + +static int mcp3422_read (struct mcp3422 *adc,int *value,u8 *config) +{ +int ret =0 ; +u8 sample_rate =MCP3422_SAMPLE_RATE (adc->config); +u8 buf[4 ] = {'\0' ,'\0' ,'\0' ,'\0' }; + + *value =0 ; + +if (sample_rate ==MCP3422_SRATE_3 ) { + ret =i2c_master_recv (adc->i2c, buf,4 ); + *value += (s8 )buf[0 ]; + *value <<=16 ; + *value |= buf[1 ] <<8 ; + *value |= buf[2 ]; + *config = buf[3 ]; +if (*value ==0xFFFFFFFF ) + *value =0 ; + }else { + ret =i2c_master_recv (adc->i2c, buf,3 ); + *value += (s8 )buf[0 ]; + *value <<=8 ; + *value |= buf[1 ]; + *config = buf[2 ]; + } + +return ret;
drivers/iio/adc/mcp3422.c line 106
Quoted 10 lines
drivers/iio/adc/mcp3422.c new file +10
-0+} + +static int mcp3422_read_channel (struct mcp3422 *adc, +struct iio_chan_spec const *channel,int *value) +{ +int ret, mtime =0 ; +u8 current_config =0 ; +u8 req_channel = channel->channel -1 ; + + ret =mcp3422_read (adc, value, ¤t_config);
is it not possible to know beforehand that the current read is for a different channel?
noone except the driver should control the device's configuration
locking seems necessary for the present strategy; the configuration could change in the meanwhile
Quoted 34 lines
drivers/iio/adc/mcp3422.c new file +34
-0+ +if (req_channel !=MCP3422_CHANNEL (current_config)) { + adc->config &= ~MCP3422_CHANNEL_MASK ; + adc->config |= ((req_channel <<5 ) &MCP3422_CHANNEL_MASK ); +mcp3422_update_config (adc); +switch (MCP3422_SAMPLE_RATE (current_config)) { +case MCP3422_SRATE_240 : + mtime =1000 /240 ; +break ; +case MCP3422_SRATE_60 : + mtime =1000 /60 ; +break ; +case MCP3422_SRATE_15 : + mtime =1000 /15 ; +break ; +case MCP3422_SRATE_3 : + mtime =1000 /3 ; +break ; + } +msleep (mtime); + ret =mcp3422_read (adc, value, ¤t_config); + } +return ret; +} + +static int mcp3422_read_raw (struct iio_dev *iio, +struct iio_chan_spec const *channel,int *value, +int *shift,long mask) +{ +struct mcp3422 *adc =iio_priv (iio); +int err, temp =0 ; + +u8 sample_rate =MCP3422_SAMPLE_RATE (adc->config); +u8 pga =MCP3422_PGA (adc->config);
drivers/iio/adc/mcp3422.c line 150
Quoted 10 lines
drivers/iio/adc/mcp3422.c new file +10
-0+ +switch (mask) { +case IIO_CHAN_INFO_RAW : + err =mcp3422_read_channel (adc, channel, &temp); +if (err <0 ) +return err; + +/* +* Converting the output +*/
single line comment
drivers/iio/adc/mcp3422.c line 153
Quoted 3 lines
drivers/iio/adc/mcp3422.c new file +3
-0+ *value = (temp * rates_to_lsb[sample_rate]) + / (pga ?1 << pga :1 ); +
scaling to be done in INFO_SCALE
Quoted 161 lines
drivers/iio/adc/mcp3422.c new file +161
-0+return IIO_VAL_INT ; + +case IIO_CHAN_INFO_SCALE : + + *value =VREF *1000000 ; + +return IIO_VAL_INT ; + +default : +break ; + } + +return -EINVAL ; +} + +static ssize_t mcp3422_set_sample_rate (struct device *dev, +struct device_attribute *attr, +const char *buf,size_t count) +{ +struct i2c_client *client =to_i2c_client (dev); +struct iio_dev *iio =i2c_get_clientdata (client); +struct mcp3422 *adc =iio_priv (iio); +u8 value =0 ; + +if (kstrtou8 (buf,10 , &value) <0 ) +return -EINVAL ; + +switch (value) { +case 240 : + value =MCP3422_SRATE_240 ; +break ; +case 60 : + value =MCP3422_SRATE_60 ; +break ; +case 15 : + value =MCP3422_SRATE_15 ; +break ; +case 3 : + value =MCP3422_SRATE_3 ; +break ; +default : +return -EINVAL ; + } + + adc->config &= ~MCP3422_SRATE_MASK ; + adc->config |= ((value <<2 ) &MCP3422_SRATE_MASK ); + +mcp3422_update_config (adc); + +return count; +} + +static ssize_t mcp3422_get_sample_rate (struct device *dev, +struct device_attribute *attr, +char *buf) +{ +struct i2c_client *client =to_i2c_client (dev); +struct iio_dev *iio =i2c_get_clientdata (client); +struct mcp3422 *adc =iio_priv (iio); +u8 value =0 ; + +switch (MCP3422_SAMPLE_RATE (adc->config)) { +case 0 : + value =240 ; +break ; +case 1 : + value =60 ; +break ; +case 2 : + value =15 ; +break ; +case 3 : + value =3 ; +break ; + } + +return sprintf (buf,"%d\n" , value); +} + +static ssize_t mcp3422_set_pga (struct device *dev, +struct device_attribute *attr, +const char *buf,size_t count) +{ +struct i2c_client *client =to_i2c_client (dev); +struct iio_dev *iio =i2c_get_clientdata (client); +struct mcp3422 *adc =iio_priv (iio); +u8 value =0 ; + +if (kstrtou8 (buf,10 , &value) <0 ) +return -EINVAL ; + +switch (value) { +case 1 : + value =0 ; +break ; +case 2 : + value =1 ; +break ; +case 4 : + value =2 ; +break ; +case 8 : + value =3 ; +break ; +default : +return -EINVAL ; + } + + adc->config &= ~MCP3422_PGA_MASK ; + adc->config |= (value &MCP3422_PGA_MASK ); + +mcp3422_update_config (adc); + +return count; +} + +static ssize_t mcp3422_get_pga (struct device *dev, +struct device_attribute *attr, +char *buf) +{ +struct i2c_client *client =to_i2c_client (dev); +struct iio_dev *iio =i2c_get_clientdata (client); +struct mcp3422 *adc =iio_priv (iio); + +return sprintf (buf,"%d\n" ,1 <<MCP3422_PGA (adc->config)); +} + +static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR, + mcp3422_get_sample_rate, + mcp3422_set_sample_rate); +static IIO_DEVICE_ATTR(pga, + S_IRUGO | S_IWUSR, + mcp3422_get_pga, + mcp3422_set_pga, 0); +static IIO_CONST_ATTR(sampling_frequency_available, "240 60 15 3"); +static IIO_CONST_ATTR(pga_available, "1 2 4 8"); + +static struct attribute *mcp3422_attributes[] = { + &iio_dev_attr_sampling_frequency.dev_attr.attr, + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_pga.dev_attr.attr, + &iio_const_attr_pga_available.dev_attr.attr, +NULL , +}; + +static const struct attribute_group mcp3422_attribute_group = { + .attrs = mcp3422_attributes, +}; + +static const struct iio_chan_spec mcp3422_channels[] = { +MCP3422_CHAN (1 ), +MCP3422_CHAN (2 ), +MCP3422_CHAN (3 ), +MCP3422_CHAN (4 ), +}; + +static const struct iio_info mcp3422_info = { + .read_raw = mcp3422_read_raw, + .attrs = &mcp3422_attribute_group, + .driver_module =THIS_MODULE , +};
drivers/iio/adc/mcp3422.c line 324
Quoted 10 lines
drivers/iio/adc/mcp3422.c new file +10
-0+ +static int mcp3422_probe (struct i2c_client *client, +const struct i2c_device_id *id) +{ +struct iio_dev *iio; +struct mcp3422 *adc; +int err; + +if (!i2c_check_functionality (client->adapter,I2C_FUNC_SMBUS_WORD_DATA )) +return -ENODEV ;
driver does not use WORD transfers
drivers/iio/adc/mcp3422.c line 328
Quoted 4 lines
drivers/iio/adc/mcp3422.c new file +4
-0+ + iio =iio_device_alloc (sizeof (*adc)); +if (!iio) +return -ENOMEM ;
devm_iio_device_alloc()
drivers/iio/adc/mcp3422.c line 334
Quoted 6 lines
drivers/iio/adc/mcp3422.c new file +6
-0+ + adc =iio_priv (iio); + adc->i2c = client; + +/* meaningful default configuration */ + adc->config =0x10 ;
0x10 could/should be replaced by meaningful constants like SRATE_XX, PGA, etc.
Quoted 31 lines
drivers/iio/adc/mcp3422.c new file +31
-0+ + iio->dev.parent = &client->dev; + iio->name =dev_name (&client->dev); + iio->modes =INDIO_DIRECT_MODE ; + iio->info = &mcp3422_info; + + iio->channels = mcp3422_channels; + iio->num_channels =ARRAY_SIZE (mcp3422_channels); + + err =iio_device_register (iio); +if (err <0 ) + goto iio_free; + +i2c_set_clientdata (client, iio); + +mcp3422_update_config (adc); + +return 0 ; + +iio_free: +iio_device_free (iio); + +return err; +} + +static int mcp3422_remove (struct i2c_client *client) +{ +struct iio_dev *iio =i2c_get_clientdata (client); + +iio_device_unregister (iio); +iio_device_free (iio);
drivers/iio/adc/mcp3422.c line 375
Quoted 10 lines
drivers/iio/adc/mcp3422.c new file +10
-0+ +return 0 ; +} + +static const struct i2c_device_id mcp3422_id[] = { + {"mcp3422" ,2 }, + {"mcp3423" ,3 }, + {"mcp3424" ,4 }, + { } +};
what is the difference between the devices?
id doesn't get used?
Quoted 26 lines
drivers/iio/adc/mcp3422.c new file +25
-0+MODULE_DEVICE_TABLE (i2c, mcp3422_id); + +#ifdef CONFIG_OF +static const struct of_device_id mcp3422_of_match[] = { + { .compatible ="mcp3422" }, + { } +}; +MODULE_DEVICE_TABLE (of, mcp3422_of_match); +#endif + +static struct i2c_driver mcp3422_driver = { + .driver = { + .name ="mcp3422" , + .owner =THIS_MODULE , + .of_match_table =of_match_ptr (mcp3422_of_match), + }, + .probe = mcp3422_probe, + .remove = mcp3422_remove, + .id_table = mcp3422_id, +}; +module_i2c_driver (mcp3422_driver); + +MODULE_AUTHOR ("Angelo Compagnucci <[email protected]>" ); +MODULE_DESCRIPTION ("Microchip mcp3422/3/4 driver" ); +MODULE_LICENSE ("GPL v2" );
Signature · 2 lines
Peter Meerwald +43-664-2444418 (mobile)