drm/i915: Only unmask required PM interrupts
Subsystems (2)
PATCH 1/1 drm/i915: Only unmask required PM interrupts
Un-masking all PM interrupts causes hardware to generate interrupts regardless of whether the interrupts are enabled on the DE side. Since turbo only need up/down threshold and rc6 timeout interrupt, mask all other interrupts bits to avoid unnecessary overhead/wake up.
--- drivers/gpu/drm/i915/intel_pm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +4 -4
@@ -3328,8 +3328,8 @@ static void gen6_enable_rps(struct drm_device *dev)I915_WRITE (GEN6_PMIMR ,I915_READ (GEN6_PMIMR ) & ~GEN6_PM_RPS_EVENTS );I915_WRITE (GEN6_PMIIR ,GEN6_PM_RPS_EVENTS );spin_unlock_irq (&dev_priv->rps.lock); -/* unmask all PM interrupts */ -I915_WRITE (GEN6_PMINTRMSK ,0 ); +/* only unmask PM interrupts we need. Mask all others. */ +I915_WRITE (GEN6_PMINTRMSK , ~GEN6_PM_RPS_EVENTS ); rc6vids =0 ; ret =sandybridge_pcode_read (dev_priv,GEN6_PCODE_READ_RC6VIDS , &rc6vids);
@@ -3596,8 +3596,8 @@ static void valleyview_enable_rps(struct drm_device *dev)WARN_ON (dev_priv->rps.pm_iir !=0 );I915_WRITE (GEN6_PMIMR ,0 );spin_unlock_irq (&dev_priv->rps.lock); -/* enable all PM interrupts */ -I915_WRITE (GEN6_PMINTRMSK ,0 ); +/* enable only the PM interrupts we need. Mask everything else */ +I915_WRITE (GEN6_PMINTRMSK , ~GEN6_PM_RPS_EVENTS );gen6_gt_force_wake_put (dev_priv); }
Signature · 1 line
1.7.9.5
Quoted 5 lines · Vinit Azad
Un-masking all PM interrupts causes hardware to generate interrupts regardless of whether the interrupts are enabled on the DE side. Since turbo only need up/down threshold and rc6 timeout interrupt, mask all other interrupts bits to avoid unnecessary overhead/wake up.
Just to clarify since I can't really believe this yet: Even though we disable all other interrupt sources in PMIER and mask them in PMIMR hw still manages to fire off our interrupt handler? Do those interrupts end up setting PMIIR?
Thanks, Daniel
Quoted 40 lines
Change-Id I6c947df6fd5f60584d39b9e8b8c89faa51a5e827Signed-off-by Vinit Azad <[email protected]>--- drivers/gpu/drm/i915/intel_pm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/intel_pm.c +4
-5@@ -3328,8 +3328,8 @@ static void gen6_enable_rps(struct drm_device *dev)I915_WRITE (GEN6_PMIMR ,I915_READ (GEN6_PMIMR ) & ~GEN6_PM_RPS_EVENTS );I915_WRITE (GEN6_PMIIR ,GEN6_PM_RPS_EVENTS );spin_unlock_irq (&dev_priv->rps.lock); -/* unmask all PM interrupts */ -I915_WRITE (GEN6_PMINTRMSK ,0 ); +/* only unmask PM interrupts we need. Mask all others. */ +I915_WRITE (GEN6_PMINTRMSK , ~GEN6_PM_RPS_EVENTS ); rc6vids =0 ; ret =sandybridge_pcode_read (dev_priv,GEN6_PCODE_READ_RC6VIDS , &rc6vids);@@ -3596,8 +3596,8 @@ static void valleyview_enable_rps(struct drm_device *dev)WARN_ON (dev_priv->rps.pm_iir !=0 );I915_WRITE (GEN6_PMIMR ,0 );spin_unlock_irq (&dev_priv->rps.lock); -/* enable all PM interrupts */ -I915_WRITE (GEN6_PMINTRMSK ,0 ); +/* enable only the PM interrupts we need. Mask everything else */ +I915_WRITE (GEN6_PMINTRMSK , ~GEN6_PM_RPS_EVENTS );gen6_gt_force_wake_put (dev_priv); } --1.7.9.5
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Our interrupt handler isn't being fired since we do set the IER bits properly (IIR bits aren't set). The overhead isn't because our driver is reacting to these interrupts, but because hardware keeps generating internal messages when PMINTRMSK doesn't mask out the up/down EI interrupts (which happen periodically).
Unfortunately, the default value of PMINTRMSK register is 0 instead of 0xFFFFFFFF as it is for other IMR, so we have to mask out the interrupts manually.
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Daniel Vetter
Sent: Wednesday, August 14, 2013 13:47
To: Azad, Vinit
Cc: intel-gfx
Subject: Re: [Intel-gfx] [PATCH] drm/i915: Only unmask required PM interrupts
Quoted 5 lines · Vinit Azad
Un-masking all PM interrupts causes hardware to generate interrupts regardless of whether the interrupts are enabled on the DE side. Since turbo only need up/down threshold and
rc6 timeout interrupt, mask all other interrupts bits to avoid unnecessary overhead/wake up.
Just to clarify since I can't really believe this yet: Even though we disable all other interrupt sources in PMIER and mask them in PMIMR hw still manages to fire off our interrupt handler? Do those interrupts end up setting PMIIR?
Thanks, Daniel
Quoted 35 lines
Change-Id I6c947df6fd5f60584d39b9e8b8c89faa51a5e827Signed-off-by Vinit Azad <[email protected]>--- drivers/gpu/drm/i915/intel_pm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/i915/intel_pm.cindex 8e9ce07..17a0dae 100644drivers/gpu/drm/i915/intel_pm.c +2
-2@@ -3328,8 +3328,8 @@ static void gen6_enable_rps(struct drm_device *dev)I915_WRITE (GEN6_PMIMR ,I915_READ (GEN6_PMIMR ) & ~GEN6_PM_RPS_EVENTS );I915_WRITE (GEN6_PMIIR ,GEN6_PM_RPS_EVENTS );spin_unlock_irq (&dev_priv->rps.lock); -/* unmask all PM interrupts */ -I915_WRITE (GEN6_PMINTRMSK ,0 ); +/* only unmask PM interrupts we need. Mask all others. */ +I915_WRITE (GEN6_PMINTRMSK , ~GEN6_PM_RPS_EVENTS ); rc6vids =0 ; ret = sandybridge_pcode_read(dev_priv,
GEN6_PCODE_READ_RC6VIDS, &rc6vids); @@ -3596,8 +3596,8 @@ static voidvalleyview_enable_rps(struct drm_device *dev)WARN_ON(dev_priv->rps.pm_iir != 0); I915_WRITE(GEN6_PMIMR, 0); spin_unlock_irq(&dev_priv->rps.lock);drivers/gpu/drm/i915/intel_pm.c +2
-3-/* enable all PM interrupts */ -I915_WRITE (GEN6_PMINTRMSK ,0 ); +/* enable only the PM interrupts we need. Mask everything else */ +I915_WRITE (GEN6_PMINTRMSK , ~GEN6_PM_RPS_EVENTS );gen6_gt_force_wake_put (dev_priv); } --1.7.9.5
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
Quoted 5 lines · Vinit
Our interrupt handler isn't being fired since we do set the IER bits properly (IIR bits aren't set). The overhead isn't because our driver is reacting to these interrupts, but because hardware keeps generating internal messages when PMINTRMSK doesn't mask out the up/down EI interrupts (which happen periodically).
Ah, that makes more sense. Added to the commit message, please elaborate more precisely for the next patch what exactly the effects are.
Quoted 18 lines
Unfortunately, the default value of PMINTRMSK register is 0 instead of
0xFFFFFFFFas it is for other IMR, so we have to mask out the interrupts manually.-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Daniel Vetter
Sent: Wednesday, August 14, 2013 13:47
To: Azad, Vinit
Cc: intel-gfx
Subject: Re: [Intel-gfx] [PATCH] drm/i915: Only unmask required PM interruptsQuoted 5 lines · Vinit Azad
Un-masking all PM interrupts causes hardware to generate interrupts regardless of whether the interrupts are enabled on the DE side. Since turbo only need up/down threshold and
rc6 timeout interrupt, mask all other interrupts bits to avoid unnecessary overhead/wake up.
Quoted 9 lines
Just to clarify since I can't really believe this yet: Even though we disable all other interrupt sources in PMIER and mask them in PMIMR hw still manages to fire off our interrupt handler? Do those interrupts end up setting PMIIR?
Thanks, Daniel
Quoted 3 lines
Change-Id I6c947df6fd5f60584d39b9e8b8c89faa51a5e827Signed-off-by Vinit Azad <[email protected]>
Patch merged to dinq with a bit of manual fixup. Please base patches on top of my drm-intel-nightly tree if possible, only really critical fixes (for hangs, black screens, ...) should be pased on -fixes.
Thanks for the patch,
-Daniel
Quoted 43 lines
Quoted 32 lines
--- drivers/gpu/drm/i915/intel_pm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)(quoted diff) +0
-0
b/drivers/gpu/drm/i915/intel_pm.cindex 8e9ce07..17a0dae 100644drivers/gpu/drm/i915/intel_pm.c +2
-2@@ -3328,8 +3328,8 @@ static void gen6_enable_rps(struct drm_device *dev)I915_WRITE (GEN6_PMIMR ,I915_READ (GEN6_PMIMR ) & ~GEN6_PM_RPS_EVENTS );I915_WRITE (GEN6_PMIIR ,GEN6_PM_RPS_EVENTS );spin_unlock_irq (&dev_priv->rps.lock); -/* unmask all PM interrupts */ -I915_WRITE (GEN6_PMINTRMSK ,0 ); +/* only unmask PM interrupts we need. Mask all others. */ +I915_WRITE (GEN6_PMINTRMSK , ~GEN6_PM_RPS_EVENTS ); rc6vids =0 ; ret = sandybridge_pcode_read(dev_priv,
GEN6_PCODE_READ_RC6VIDS, &rc6vids); @@ -3596,8 +3596,8 @@ static voidvalleyview_enable_rps(struct drm_device *dev)WARN_ON(dev_priv->rps.pm_iir != 0); I915_WRITE(GEN6_PMIMR, 0); spin_unlock_irq(&dev_priv->rps.lock);drivers/gpu/drm/i915/intel_pm.c +2
-3-/* enable all PM interrupts */ -I915_WRITE (GEN6_PMINTRMSK ,0 ); +/* enable only the PM interrupts we need. Mask everything else */ +I915_WRITE (GEN6_PMINTRMSK , ~GEN6_PM_RPS_EVENTS );gen6_gt_force_wake_put (dev_priv); } --1.7.9.5
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch