Skip to contentSkip to conversation

Help with a PPCXXX port

U-Boot txcotrader 1 participant 1 message Sep 13, 2013

lore
Share & tools
lore

txcotrader

author
#0 lore raw

I'm trying to port a custom board running a AMCC 460SX processor to a more recent version of U-Boot. I'm digging around the configuration registers trying to figure out why my initial printout is showing:

U-Boot 2013.03932a-dirty (Sep 12 2013 - 14:57:13)

CPU: AMCC PowerPC 460SX Rev. A at 231.291 MHz (PLB=33 OPB=16 EBC=4)
Security support
Bootstrap Option A - Boot ROM Location EBC (8 bits) Internal PCI arbiter enabled
32 kche 32 kB D-Cache

While the older version is:
U-Boot 1.3.4 (Oct 20 2012 - 11:14:42)

CPU: AMCC PowerPC 460SX Rev. B at 800 MHz (PLB=200 MHz, OPB=100 MHz,
EBC=100 MHz, DDR=400 MHz)
Bootstrap Option A - Boot ROM Location EBC (16 bits) Internal PCI arbiter disabled
32 kB I-Cache 32 kB D-Cache

The Rev, Clock Frequency, PLB, OPB, EBC and DDR values are either different or non-existent. I'm going to continue to dig, but if anyone is willing to provide some guidance it would be greatly appreciated.

Thanks!

--
View this message in context: http://u-boot.10912.n7.nabble.com/Help-with-a-PPCXXX-port-tp163128.html
Sent from the U-Boot mailing list archive at Nabble.com.