Skip to contentSkip to conversation

lsi: small cleanup and add 53C810 variant

PATCH Applied Hervé Poussineau 2 participants 7 messages Sep 14, 2013 – Sep 16, 2013

lore
Share & tools
lore
#0 lore raw

v2 cover lsi: small cleanup and add 53C810 variant

Hi,

This small patchset fixes a few issues I encountered while trying to add support for the IBM RS/6000 40p.

Patches 1 to 4 are small cleanups.
Patch 5 may be more controversial, as it adds support for an older (albeit compatible) SCSI adapter, without removing emulation of newer features.

Changes since v1:
- added patch 4 (lsi emulation has been tested on big-endian guest)
- added a comment in patch 5 (remark from Paolo Bonzini)

Hervé Poussineau (5):
lsi: use constant name instead of its value
lsi: check ssid versus sdid only if ssid is valid
lsi: ignore write accesses to CTEST0 registers
lsi: remove todo
lsi: add 53C810 variant

 hw/scsi/lsi53c895a.c     |   32 +++++++++++++++++++++++++++-----
 include/hw/pci/pci_ids.h |    1 +
 2 files changed, 28 insertions(+), 5 deletions(-)
Signature · 1 line
1.7.10.4
#2 lore raw

PATCH v2 2/5 lsi: check ssid versus sdid only if ssid is valid

This prevents some (invalid) error messages on console.

---
 hw/scsi/lsi53c895a.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
hw/scsi/lsi53c895a.c +2 -1
index ca01e86..764feaa 100644
@@ -1705,8 +1705,9 @@ static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
         s->sxfer = val;
         break;
     case 0x06: /* SDID */
-        if ((val & 0xf) != (s->ssid & 0xf))
+        if ((s->ssid & 0x80) && (val & 0xf) != (s->ssid & 0xf)) {
             BADF("Destination ID does not match SSID\n");
+        }
         s->sdid = val & 0xf;
         break;
     case 0x07: /* GPREG0 */
Signature · 1 line
1.7.10.4
#4 lore raw

PATCH v2 4/5 lsi: remove todo

In reply to Hervé Poussineau

LSI emulation has been tested with Linux on PPC platform.

---
 hw/scsi/lsi53c895a.c |    3 ---
 1 file changed, 3 deletions(-)
hw/scsi/lsi53c895a.c +0 -3
index a9a9eca..47e4680 100644
@@ -7,9 +7,6 @@
  * This code is licensed under the LGPL.
  */
 
-/* ??? Need to check if the {read,write}[wl] routines work properly on
-   big-endian targets.  */
-
 #include <assert.h>
 
 #include "hw/hw.h"
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH v2 1/5 lsi: use constant name instead of its value

In reply to Hervé Poussineau
---
 hw/scsi/lsi53c895a.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
hw/scsi/lsi53c895a.c +2 -2
index 0c36842..ca01e86 100644
@@ -1521,7 +1521,7 @@ static uint8_t lsi_reg_readb(LSIState *s, int offset)
            used for diagnostics, so should be ok.  */
         return 0;
     case 0xc: /* DSTAT */
-        tmp = s->dstat | 0x80;
+        tmp = s->dstat | LSI_DSTAT_DFE;
         if ((s->istat0 & LSI_ISTAT0_INTF) == 0)
             s->dstat = 0;
         lsi_update_irq(s);
@@ -2113,7 +2113,7 @@ static int lsi_scsi_init(PCIDevice *dev)
                           "lsi-io", 256);
 
     pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->io_io);
-    pci_register_bar(dev, 1, 0, &s->mmio_io);
+    pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mmio_io);
     pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->ram_io);
     QTAILQ_INIT(&s->queue);
 
Signature · 1 line
1.7.10.4
#3 lore raw

PATCH v2 3/5 lsi: ignore write accesses to CTEST0 registers

In reply to Hervé Poussineau

53C895A datasheet says that this register is read/write, and that the value returned on read access is dependant of DMA FIFO state. However, nothing is said for written value.

53C810A datasheet gives more insight about this register:
"This was a general purpose read/write register in previous SYM53C8XX family chips. Although it is still a read/write register, Symbios reserves the right to use these bits for future 53C8XX family enhancements."

This prevents going to the default case, which prints an error message.

---
 hw/scsi/lsi53c895a.c |    3 +++
 1 file changed, 3 insertions(+)
hw/scsi/lsi53c895a.c +3 -0
index 764feaa..a9a9eca 100644
@@ -1749,6 +1749,9 @@ static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
     case 0x17: /* MBOX1 */
         s->mbox1 = val;
         break;
+    case 0x18: /* CTEST0 */
+        /* nothing to do */
+        break;
     case 0x1a: /* CTEST2 */
 	s->ctest2 = val & LSI_CTEST2_PCICIE;
 	break;
Signature · 1 line
1.7.10.4
#5 lore raw

PATCH v2 5/5 lsi: add 53C810 variant

In reply to Hervé Poussineau

Currently, treat it exactly as a 53C895A.
53C895A is a 53C810 with more capabilities, so this should work.

However, this lets us test different code paths on Linux, which don't use lastest features if it detect a 810, or on some OSes which only support 810 and not 895A (like very old Windows NT versions).

---
 hw/scsi/lsi53c895a.c     |   21 +++++++++++++++++++++
 include/hw/pci/pci_ids.h |    1 +
 2 files changed, 22 insertions(+)
hw/scsi/lsi53c895a.c +21 -0
index 47e4680..1e75e5b 100644
@@ -7,6 +7,12 @@
  * This code is licensed under the LGPL.
  */
 
+/* Note:
+ * LSI53C810 emulation is incorrect, in the sense that it supports
+ * features added in later evolutions. This should not be a problem,
+ * as well-behaved operating systems will not try to use them.
+ */
+
 #include <assert.h>
 
 #include "hw/hw.h"
@@ -275,6 +281,7 @@ typedef struct {
     uint32_t script_ram[2048];
 } LSIState;
 
+#define TYPE_LSI53C810  "lsi53c810"
 #define TYPE_LSI53C895A "lsi53c895a"
 
 #define LSI53C895A(obj) \
@@ -2152,9 +2159,23 @@ static const TypeInfo lsi_info = {
     .class_init    = lsi_class_init,
 };
 
+static void lsi53c810_class_init(ObjectClass *klass, void *data)
+{
+    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+    k->device_id = PCI_DEVICE_ID_LSI_53C810;
+}
+
+static TypeInfo lsi53c810_info = {
+    .name          = TYPE_LSI53C810,
+    .parent        = TYPE_LSI53C895A,
+    .class_init    = lsi53c810_class_init,
+};
+
 static void lsi53c895a_register_types(void)
 {
     type_register_static(&lsi_info);
+    type_register_static(&lsi53c810_info);
 }
 
 type_init(lsi53c895a_register_types)
include/hw/pci/pci_ids.h +1 -0
index 3ddaf6a..4c0002b 100644
@@ -53,6 +53,7 @@
 /* Vendors and devices.  Sort key: vendor first, device next. */
 
 #define PCI_VENDOR_ID_LSI_LOGIC          0x1000
+#define PCI_DEVICE_ID_LSI_53C810         0x0001
 #define PCI_DEVICE_ID_LSI_53C895A        0x0012
 #define PCI_DEVICE_ID_LSI_SAS1078        0x0060
 
Signature · 1 line
1.7.10.4
#6 lore raw
In reply to Hervé Poussineau

Il 14/09/2013 17:51, Hervé Poussineau ha scritto:

Quoted 21 lines

Hi,

This small patchset fixes a few issues I encountered while trying to add support for the IBM RS/6000 40p.

Patches 1 to 4 are small cleanups.
Patch 5 may be more controversial, as it adds support for an older (albeit compatible) SCSI adapter, without removing emulation of newer features.

Changes since v1:
- added patch 4 (lsi emulation has been tested on big-endian guest)
- added a comment in patch 5 (remark from Paolo Bonzini)

Hervé Poussineau (5):
lsi: use constant name instead of its value
lsi: check ssid versus sdid only if ssid is valid
lsi: ignore write accesses to CTEST0 registers
lsi: remove todo
lsi: add 53C810 variant

Quoted 4 lines
 hw/scsi/lsi53c895a.c     |   32 +++++++++++++++++++++++++++-----
 include/hw/pci/pci_ids.h |    1 +
 2 files changed, 28 insertions(+), 5 deletions(-)

Applied to scsi-next, thanks.

Paolo