Skip to contentSkip to conversation

Problems with TechniSat CableStar Combo HD CI

DISCUSSION Tobias Wessels 1 participant 1 message Sep 15, 2013 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi everyone on this list,

This is my first post in a mailing list and I'm not quite sure if this is the right place seeking help for a technical problem with a specific DVB-C card. But since I've searched everywhere on the net, this is my last chance for now to resolve a problem with the DVB-T/C card "TechniSat CableStar Combo HD CI".

I have this card since a long time ago, but it never worked (and still doesn't). But just recently I've read on linuxtv.org that it is possible to use that card with the latest kernels (from 3.9.2 on) and modified drivers, so I decided to give it another try; following the instructions from this post:
http://forum.ubuntuusers.de/topic/technisat-cablestar-combo-hd-benutzen/#post-5650497

At first, everything looked fine, since the card seems to be recognized and the drivers are loaded; as shown by the dmesg output:

[ 1322.092805] DVB: registering new adapter (Technisat Combo HD CI)
[ 1322.095684] usb 1-2: dvb_usb_v2: MAC address: c2:f7:14:03:00:00
[ 1322.096525] drxk: frontend initialized.
[ 1322.096625] usb 1-2: firmware: agent loaded
dvb-usb-terratec-h7-drxk.fw into memory
[ 1322.096759] usb 1-2: DVB: registering adapter 0 frontend 0 (DRXK)...
[ 1322.096869] mt2063_attach: Attaching MT2063
[ 1322.096881] Registered IR keymap rc-nec-terratec-cinergy-xs
[ 1322.097128] input: Technisat Combo HD CI
as /devices/pci0000:00/0000:00:12.2/usb1/1-2/rc/rc1/input16
[ 1322.097338] rc1: Technisat Combo HD CI
as /devices/pci0000:00/0000:00:12.2/usb1/1-2/rc/rc1
[ 1322.097347] usb 1-2: dvb_usb_v2: schedule remote query interval to
400 msecs
[ 1322.097357] usb 1-2: dvb_usb_v2: 'Technisat Combo HD CI' successfully
initialized and connected
[ 1322.145024] drxk: status = 0x439130d9
[ 1322.145028] drxk: detected a drx-3913k, spin A2, xtal 27.000 MHz
[ 1324.410428] drxk: DRXK driver version 0.9.4300
[ 1403.954692] mt2063: detected a mt2063 B3

So I've tried to run a scan for TV channels with w_scan (run as root), which runs through, but doesn't find any. And another look into the dmesg shows why:

[ 1403.954692] mt2063: detected a mt2063 B3
[ 1404.621902] usb 1-2: dvb_frontend_ioctl_legacy: doesn't know how to
handle a DVBv3 call to delivery system 0
[ 1404.854807] mt2063: detected a mt2063 B3
[ 1405.523916] usb 1-2: dvb_frontend_ioctl_legacy: doesn't know how to
handle a DVBv3 call to delivery system 0
[ 1405.882456] drxk: SCU not ready
[ 1405.882470] drxk: Error -5 on qam_reset_qam
[ 1405.882477] drxk: Error -5 on set_qam_standard
[ 1405.882482] drxk: Error -5 on setoperation_mode
[ 1406.094010] drxk: SCU not ready
[ 1406.094023] drxk: Error -5 on qam_reset_qam
[ 1406.094028] drxk: Error -5 on set_qam
[ 1406.094033] drxk: Error -5 on start
[ 1406.727412] drxk: SCU not ready
[ 1406.727425] drxk: Error -5 on get_qam_lock_status
[ 1406.727430] drxk: Error -5 on get_lock_status
[ 1407.088033] drxk: SCU not ready
[ 1407.088046] drxk: Error -5 on get_qam_lock_status
[ 1407.088052] drxk: Error -5 on get_lock_status

<<[... and so on ...]>>

I've tried the newest drivers with two different kernels... the Wheezy stock kernel (3.2) and the newest backport kernel both in a freshly installed Debian Wheezy.

Before I give you the rest of the relevant info one more thing. Even if you don't have the time now to help and fix this issue, I want to thank you so far for your work to make linux such a great system.

So here comes the rest of the info, which hopefully helps you, and greeting to all of you. For further questions feel free to contact me.

Tobias Wessels

$# uname -a
Linux debian 3.10-0.bpo.2-686-pae #1 SMP Debian 3.10.5-1~bpo70+1 (2013-08-11) i686 GNU/Linux

$# lsusb -v
Bus 001 Device 011: ID 14f7:0003 TechniSat Digital GmbH CableStar Combo HD CI
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x14f7 TechniSat Digital GmbH
  idProduct          0x0003 CableStar Combo HD CI
  bcdDevice            0.03
  iManufacturer           1 TechniSat Digital S.A.
  iProduct                2 CableStar Combo HD CI
  iSerial                 3 0008C9D90E19
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 100
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 

bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered