Fix address of second XOR engine in Kirkwood SoC DT
PATCH 1/1 Fix address of second XOR engine in Kirkwood SoC DT
There appears to be an error in the second address of the second XOR engine in the Kirkwood SoC device tree, which is specified as 0xd0b00 but should be 0x60b00.
For confirmation of address see
http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf table 581 page 658. Also see definition of XOR1_HIGH_PHYS_BASE inarch/arm/mach-kirkwood/include/mach/kirkwood.h
#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
--- arch/arm/boot/dts/kirkwood.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
(quoted diff) +0 -0
b/arch/arm/boot/dts/kirkwood.dtsi
index cf7aeaf..63d4066 100644
arch/arm/boot/dts/kirkwood.dtsi +1 -1
@@ -167,7 +167,7 @@ xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 - 0xd0B00 0x100>; + 0x60B00 0x100>; status = "okay"; clocks = <&gate_clk 16>;
---
Quoted 11 lines · Quentin Armitage
There appears to be an error in the second address of the second XOR engine in the Kirkwood SoC device tree, which is specified as
0xd0b00but should be0x60b00.For confirmation of address see
http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf table 581 page 658. Also see definition ofXOR1_HIGH_PHYS_BASEinarch/arm/mach-kirkwood/include/mach/kirkwood.h
#defineXOR1_HIGH_PHYS_BASE(KIRKWOOD_REGS_PHYS_BASE+0x60B00)Signed-off-by Quentin Armitage <[email protected]>
I double-checked the references, typo and fix are correct.
Quoted 26 lines
--- arch/arm/boot/dts/kirkwood.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/kirkwood.dtsi +1
-3@@ -167,7 +167,7 @@ xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 - 0xd0B00 0x100>; + 0x60B00 0x100>; status = "okay"; clocks = <&gate_clk 16>; --- --To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Jason Cooper
AppliedQuoted 10 lines · Quentin Armitage
There appears to be an error in the second address of the second XOR engine in the Kirkwood SoC device tree, which is specified as
0xd0b00but should be0x60b00.For confirmation of address see
http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf table 581 page 658. Also see definition ofXOR1_HIGH_PHYS_BASEinarch/arm/mach-kirkwood/include/mach/kirkwood.h
#defineXOR1_HIGH_PHYS_BASE(KIRKWOOD_REGS_PHYS_BASE+0x60B00)
Quoted 5 lines
Signed-off-by Quentin Armitage <[email protected]>--- arch/arm/boot/dts/kirkwood.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Applied to mvebu/fixes with Sebastian's Reviewed-by.
thx,
Jason.