regulator: wm831x-ldo: Fix max_uV for gp_ldo and aldo linear range settings
PATCH 1/1 regulator: wm831x-ldo: Fix max_uV for gp_ldo and aldo linear range settings
Fix the linear range settings in commit 5ff26a14c3331 "regulator: wm831x-ldo: Convert to use linear ranges".
For wm831x_gp_ldo:
We have below equations for list voltage before converting to linear ranges:
sel <= 0xe:
volt = 0.9-1.6V in 50mV steps
sel <= 0x1f:
volt = 1.7-3.3V in 100mV stepsmax_uV for the first linear range should be 1600000 rather than 1650000. Fix it.
For wm831x_aldo:
We have below equations for list voltage before converting to linear ranges:
sel <= 0xc:
volt = 1-1.6V in 50mV steps
sel <= 0x1f
volt = 1.7-3.5V in 100mV stepsmax_uV for the first linear range should be 1600000 rather than 1650000. Fix it.
Signed-off-by Axel Lin <[email protected]>
--- drivers/regulator/wm831x-ldo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/regulator/wm831x-ldo.c +2 -2
@@ -63,7 +63,7 @@ static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data)*/ static const struct regulator_linear_range wm831x_gp_ldo_ranges[] = { - { .min_uV =900000 , .max_uV =1650000 , .min_sel =0 , .max_sel =14 , + { .min_uV =900000 , .max_uV =1600000 , .min_sel =0 , .max_sel =14 , .uV_step =50000 }, { .min_uV =1700000 , .max_uV =3300000 , .min_sel =15 , .max_sel =31 , .uV_step =100000 },
@@ -320,7 +320,7 @@ static struct platform_driver wm831x_gp_ldo_driver = {*/ static const struct regulator_linear_range wm831x_aldo_ranges[] = { - { .min_uV =1000000 , .max_uV =1650000 , .min_sel =0 , .max_sel =12 , + { .min_uV =1000000 , .max_uV =1600000 , .min_sel =0 , .max_sel =12 , .uV_step =50000 }, { .min_uV =1700000 , .max_uV =3500000 , .min_sel =13 , .max_sel =31 , .uV_step =100000 },
Signature · 1 line
1.8.1.2
Quoted 2 lines · Axel Lin
Fix the linear range settings in commit
5ff26a14c3331"regulator: wm831x-ldo: Convert to use linear ranges".
Applied, thanks.