Skip to contentSkip to conversation

roms: build improvements

PATCH New Gerd Hoffmann 1 participant 8 messages Sep 23, 2013

lore
Share & tools
lore
#0 lore raw

cover roms: build improvements

Hi,

Here comes a patch series with a bunch of improvements for rom builds. It enables parallel builds for some of the roms, and it starts adding support for cross builds.

cheers,
Gerd

Gerd Hoffmann (7):
roms: add 'make clean'
roms: enable parallel builds for 'make lgplvgabios'
roms: build lgplvgabios isavga variant
roms: parallel ipxe builds
roms: rewrite scripts/refresh-pxe-roms.sh
roms: add rules to build slof
roms: enable ipxe cross builds

 roms/Makefile               | 63 ++++++++++++++++++++++++++++++-----
 scripts/refresh-pxe-roms.sh | 80 ++++-----------------------------------------
 2 files changed, 60 insertions(+), 83 deletions(-)
Signature · 1 line
1.8.3.1
#1 lore raw

PATCH 1/7 roms: add 'make clean'

---
 roms/Makefile | 7 +++++++
 1 file changed, 7 insertions(+)
roms/Makefile +7 -0
index 7a228ae..b646060 100644
@@ -75,3 +75,10 @@ efi-rom-%: ipxe/src/config/local/general.h
 
 ipxe/src/config/local/%: config.ipxe.%
 	cp $< $@
+
+
+clean:
+	rm -rf seabios/.config seabios/out
+	$(MAKE) $(MAKEFLAGS) -C vgabios clean
+	rm -f vgabios/VGABIOS-lgpl-latest*
+	$(MAKE) $(MAKEFLAGS) -C ipxe/src veryclean
Signature · 1 line
1.8.3.1
#2 lore raw

PATCH 2/7 roms: enable parallel builds for 'make lgplvgabios'

In reply to Gerd Hoffmann

Recurse into vgabios once, adjust dependencies, call make using $(MAKE) $(MAKEFLAGS) so jobserver mode works.

---
 roms/Makefile | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
roms/Makefile +7 -2
index b646060..6d4330f 100644
@@ -1,5 +1,6 @@
 
 vgabios_variants := stdvga cirrus vmware qxl
+vgabios_targets  := $(patsubst %,vgabios-%.bin,$(vgabios_variants))
 pxerom_variants  := e1000 eepro100 ne2k_pci pcnet rtl8139 virtio
 
 pxe-rom-e1000    efi-rom-e1000    : VID := 8086
@@ -49,12 +50,16 @@ seavgabios-%: config.vga.%
 	make -C seabios out/vgabios.bin
 	cp seabios/out/vgabios.bin ../pc-bios/vgabios-$*.bin
 
+
 lgplvgabios: $(patsubst %,lgplvgabios-%,$(vgabios_variants))
 
-lgplvgabios-%:
-	make -C vgabios vgabios-$*.bin
+lgplvgabios-%: build-lgplvgabios
 	cp vgabios/VGABIOS-lgpl-latest.$*.bin ../pc-bios/vgabios-$*.bin
 
+build-lgplvgabios:
+	$(MAKE) $(MAKEFLAGS) -C vgabios $(vgabios_targets)
+
+
 pxerom: $(patsubst %,pxe-rom-%,$(pxerom_variants))
 
 pxe-rom-%: ipxe/src/config/local/general.h
Signature · 1 line
1.8.3.1
#3 lore raw

PATCH 3/7 roms: build lgplvgabios isavga variant

In reply to Gerd Hoffmann

Add logic to also build+install the isavga vgabios variant.

---
 roms/Makefile | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
roms/Makefile +4 -2
index 6d4330f..11d7837 100644
@@ -1,6 +1,6 @@
 
-vgabios_variants := stdvga cirrus vmware qxl
-vgabios_targets  := $(patsubst %,vgabios-%.bin,$(vgabios_variants))
+vgabios_variants := stdvga cirrus vmware qxl isavga
+vgabios_targets  := $(subst -isavga,,$(patsubst %,vgabios-%.bin,$(vgabios_variants)))
 pxerom_variants  := e1000 eepro100 ne2k_pci pcnet rtl8139 virtio
 
 pxe-rom-e1000    efi-rom-e1000    : VID := 8086
@@ -53,6 +53,8 @@ seavgabios-%: config.vga.%
 
 lgplvgabios: $(patsubst %,lgplvgabios-%,$(vgabios_variants))
 
+lgplvgabios-isavga: build-lgplvgabios
+	cp vgabios/VGABIOS-lgpl-latest.bin ../pc-bios/vgabios.bin
 lgplvgabios-%: build-lgplvgabios
 	cp vgabios/VGABIOS-lgpl-latest.$*.bin ../pc-bios/vgabios-$*.bin
 
Signature · 1 line
1.8.3.1
#4 lore raw

PATCH 4/7 roms: parallel ipxe builds

In reply to Gerd Hoffmann

Enable parallel ipxe builds. Reduce the recursive make calls. Call recursive make properly using $(MAKE) $(MAKEFLAGS).

---
 roms/Makefile | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
roms/Makefile +12 -6
index 11d7837..9672625 100644
@@ -2,6 +2,7 @@
 vgabios_variants := stdvga cirrus vmware qxl isavga
 vgabios_targets  := $(subst -isavga,,$(patsubst %,vgabios-%.bin,$(vgabios_variants)))
 pxerom_variants  := e1000 eepro100 ne2k_pci pcnet rtl8139 virtio
+pxerom_targets   := 8086100e 80861209 10500940 10222000 10ec8139 1af41000
 
 pxe-rom-e1000    efi-rom-e1000    : VID := 8086
 pxe-rom-e1000    efi-rom-e1000    : DID := 100e
@@ -64,22 +65,27 @@ build-lgplvgabios:
 
 pxerom: $(patsubst %,pxe-rom-%,$(pxerom_variants))
 
-pxe-rom-%: ipxe/src/config/local/general.h
-	make -C ipxe/src bin/$(VID)$(DID).rom
+pxe-rom-%: build-pxe-roms
 	cp ipxe/src/bin/$(VID)$(DID).rom ../pc-bios/pxe-$*.rom
 
 efirom: $(patsubst %,efi-rom-%,$(pxerom_variants))
 
-efi-rom-%: ipxe/src/config/local/general.h
-	make -C ipxe/src bin/$(VID)$(DID).rom
-	make -C ipxe/src bin-i386-efi/$(VID)$(DID).efidrv
-	make -C ipxe/src bin-x86_64-efi/$(VID)$(DID).efidrv
+efi-rom-%: build-pxe-roms build-efi-roms
 	$(EFIROM) -f "0x$(VID)" -i "0x$(DID)" -l 0x02 \
 		-b ipxe/src/bin/$(VID)$(DID).rom \
 		-ec ipxe/src/bin-i386-efi/$(VID)$(DID).efidrv \
 		-ec ipxe/src/bin-x86_64-efi/$(VID)$(DID).efidrv \
 		-o ../pc-bios/efi-$*.rom
 
+build-pxe-roms: ipxe/src/config/local/general.h
+	$(MAKE) $(MAKEFLAGS) -C ipxe/src GITVERSION="" \
+		$(patsubst %,bin/%.rom,$(pxerom_targets))
+
+build-efi-roms: build-pxe-roms ipxe/src/config/local/general.h
+	$(MAKE) $(MAKEFLAGS) -C ipxe/src GITVERSION="" \
+		$(patsubst %,bin-i386-efi/%.efidrv,$(pxerom_targets)) \
+		$(patsubst %,bin-x86_64-efi/%.efidrv,$(pxerom_targets))
+
 ipxe/src/config/local/%: config.ipxe.%
 	cp $< $@
 
Signature · 1 line
1.8.3.1
#5 lore raw

PATCH 5/7 roms: rewrite scripts/refresh-pxe-roms.sh

In reply to Gerd Hoffmann

Just use the Makefile in roms/

---
 scripts/refresh-pxe-roms.sh | 80 ++++-----------------------------------------
 1 file changed, 6 insertions(+), 74 deletions(-)
scripts/refresh-pxe-roms.sh +6 -74
index 14d5860..90fc0b3 100755
@@ -21,79 +21,11 @@
 # Usage: Run from root of qemu tree
 # ./scripts/refresh-pxe-roms.sh
 
-QEMU_DIR=$PWD
-ROM_DIR="pc-bios"
-BUILD_DIR="roms/ipxe"
-LOCAL_CONFIG="src/config/local/general.h"
-
-function cleanup ()
-{
-    if [ -n "$SAVED_CONFIG" ]; then
-        cp "$SAVED_CONFIG" "$BUILD_DIR"/"$LOCAL_CONFIG"
-        rm "$SAVED_CONFIG"
-    fi
-    cd "$QEMU_DIR"
-}
-
-function make_rom ()
-{
-    cd "$BUILD_DIR"/src
-
-    BUILD_LOG=$(mktemp)
-
-    echo Building "$2"...
-    make bin/"$1".rom > "$BUILD_LOG" 2>&1
-    if [ $? -ne 0 ]; then
-        echo Build failed
-        tail --lines=100 "$BUILD_LOG"
-        rm "$BUILD_LOG"
-        cleanup
-        exit 1
-    fi
-    rm "$BUILD_LOG"
-
-    cp bin/"$1".rom "$QEMU_DIR"/"$ROM_DIR"/"$2"
-
-    cd "$QEMU_DIR"
-}
-
-if [ ! -d "$QEMU_DIR"/"$ROM_DIR" ]; then
-    echo "error: can't find $ROM_DIR directory," \
-         "run me from the root of the qemu tree"
-    exit 1
-fi
-
-if [ ! -d "$BUILD_DIR"/src ]; then
-    echo "error: $BUILD_DIR not populated, try:"
-    echo "  git submodule init $BUILD_DIR"
-    echo "  git submodule update $BUILD_DIR"
-    exit 1
-fi
-
-if [ -e "$BUILD_DIR"/"$LOCAL_CONFIG" ]; then
-    SAVED_CONFIG=$(mktemp)
-    cp "$BUILD_DIR"/"$LOCAL_CONFIG" "$SAVED_CONFIG"
-fi
-
-echo "#undef BANNER_TIMEOUT" > "$BUILD_DIR"/"$LOCAL_CONFIG"
-echo "#define BANNER_TIMEOUT 0" >> "$BUILD_DIR"/"$LOCAL_CONFIG"
-
-IPXE_VERSION=$(cd "$BUILD_DIR" && git describe --tags)
-if [ -z "$IPXE_VERSION" ]; then
-    echo "error: unable to retrieve git version"
-    cleanup
-    exit 1
+targets="pxerom"
+if test -x "$(which EfiRom 2>/dev/null)"; then
+    targets="$targets efirom"
 fi
 
-echo "#undef PRODUCT_NAME" >> "$BUILD_DIR"/"$LOCAL_CONFIG"
-echo "#define PRODUCT_NAME \"iPXE $IPXE_VERSION\"" >> "$BUILD_DIR"/"$LOCAL_CONFIG"
-
-make_rom 8086100e pxe-e1000.rom
-make_rom 80861209 pxe-eepro100.rom
-make_rom 10500940 pxe-ne2k_pci.rom
-make_rom 10222000 pxe-pcnet.rom
-make_rom 10ec8139 pxe-rtl8139.rom
-make_rom 1af41000 pxe-virtio.rom
-
-echo done
-cleanup
+cd roms
+make -j4 $targets || exit 1
+make clean
Signature · 1 line
1.8.3.1
#6 lore raw

PATCH 6/7 roms: add rules to build slof

In reply to Gerd Hoffmann

Add some logic to detect cross compilers. Add support for "make slof", which should JustWork[tm] if you are on a ppx64 machine or have a ppc64 cross compiler installed somewhere in your path.

---
 roms/Makefile | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
roms/Makefile +22 -0
index 9672625..5fcc77d 100644
@@ -18,6 +18,21 @@ pxe-rom-virtio   efi-rom-virtio   : VID := 1af4
 pxe-rom-virtio   efi-rom-virtio   : DID := 1000
 
 #
+# cross compiler auto detection
+#
+path := $(subst :, ,$(PATH))
+system := $(shell uname -s | tr "A-Z" "a-z")
+
+# first find cross binutils in path
+find-cross-ld = $(firstword $(wildcard $(patsubst %,%/$(1)-*$(system)*-ld,$(path))))
+# then check we have cross gcc too
+find-cross-gcc = $(firstword $(wildcard $(patsubst %ld,%gcc,$(call find-cross-ld,$(1)))))
+# finally strip off path + toolname so we get the prefix
+find-cross-prefix = $(subst gcc,,$(notdir $(call find-cross-gcc,$(1))))
+
+powerpc64_cross_prefix := $(call find-cross-prefix,powerpc64)
+
+#
 # EfiRom utility is shipped with edk2 / tianocore, in BaseTools/
 #
 # We need that to combine multiple images (legacy bios,
@@ -37,6 +52,7 @@ default:
 	@echo "  pxerom         -- update nic roms (bios only)"
 	@echo "  efirom         -- update nic roms (bios+efi, this needs"
 	@echo "                    the EfiRom utility from edk2 / tianocore)"
+	@echo "  slof           -- update slof.bin"
 
 bios: config.seabios
 	sh configure-seabios.sh $<
@@ -90,8 +106,14 @@ ipxe/src/config/local/%: config.ipxe.%
 	cp $< $@
 
 
+slof:
+	$(MAKE) $(MAKEFLAGS) -C SLOF CROSS=$(powerpc64_cross_prefix) qemu
+	cp SLOF/boot_rom.bin ../pc-bios/slof.bin
+
+
 clean:
 	rm -rf seabios/.config seabios/out
 	$(MAKE) $(MAKEFLAGS) -C vgabios clean
 	rm -f vgabios/VGABIOS-lgpl-latest*
 	$(MAKE) $(MAKEFLAGS) -C ipxe/src veryclean
+	$(MAKE) $(MAKEFLAGS) -C SLOF clean
Signature · 1 line
1.8.3.1
#7 lore raw

PATCH 7/7 roms: enable ipxe cross builds

In reply to Gerd Hoffmann
---
 roms/Makefile | 3 +++
 1 file changed, 3 insertions(+)
roms/Makefile +3 -0
index 5fcc77d..1966f04 100644
@@ -31,6 +31,7 @@ find-cross-gcc = $(firstword $(wildcard $(patsubst %ld,%gcc,$(call find-cross-ld
 find-cross-prefix = $(subst gcc,,$(notdir $(call find-cross-gcc,$(1))))
 
 powerpc64_cross_prefix := $(call find-cross-prefix,powerpc64)
+x86_64_cross_prefix := $(call find-cross-prefix,x86_64)
 
 #
 # EfiRom utility is shipped with edk2 / tianocore, in BaseTools/
@@ -95,10 +96,12 @@ efi-rom-%: build-pxe-roms build-efi-roms
 
 build-pxe-roms: ipxe/src/config/local/general.h
 	$(MAKE) $(MAKEFLAGS) -C ipxe/src GITVERSION="" \
+		CROSS_COMPILE=$(x86_64_cross_prefix) \
 		$(patsubst %,bin/%.rom,$(pxerom_targets))
 
 build-efi-roms: build-pxe-roms ipxe/src/config/local/general.h
 	$(MAKE) $(MAKEFLAGS) -C ipxe/src GITVERSION="" \
+		CROSS_COMPILE=$(x86_64_cross_prefix) \
 		$(patsubst %,bin-i386-efi/%.efidrv,$(pxerom_targets)) \
 		$(patsubst %,bin-x86_64-efi/%.efidrv,$(pxerom_targets))
 
Signature · 1 line
1.8.3.1