ARM: dts: imx6q-udoo: Add initial board support
Subsystems (3)
Fabio Estevam
reviewerPATCH 1/1 ARM: dts: imx6q-udoo: Add initial board support
From: Fabio Estevam <[email protected]>
For more information about the Udoo board:
http://www.udoo.org/
Signed-off-by Fabio Estevam <[email protected]>
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-udoo.dts | 39 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 40 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-udoo.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -141,6 +141,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ + imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6sl-evk.dtb \ vf610-cosmic.dtb \
arch/arm/boot/dts/imx6q-udoo.dts new file +39 -0
@@ -0,0 +1,39 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/dts-v1/; +#include "imx6q.dtsi" + +/ { + model = "Udoo i.MX6 Quad Board"; + compatible = "udoo,imx6q-udoo", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; +}; + +&sata { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + non-removable; + status = "okay"; +};
Signature · 1 line
1.8.1.2
Shawn Guo
AppliedPATCH 1/1 ARM: dts: imx6q-udoo: Add initial board support
Quoted 6 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
For more information about the Udoo board:
http://www.udoo.org/Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks.