Skip to contentSkip to conversation

Powerpc/P1022DS: Enable the DIU for P1022DS board.

PATCH New Jason Jin 1 participant 1 message Oct 8, 2013

lore
Share & tools
lore

Jason Jin

author
#0 lore raw

PATCH v2 1/1 Powerpc/P1022DS: Enable the DIU for P1022DS board.

The DIU of P1022DS was disabled by commit:
dfe64e2c89731a3f9950d7acd8681b68df2bae03 to verify the u-boot MTD subsystem.

The local bus and DIU is multiplex on P1022, but the DIU will not be enabled if there is no video-mode environment. The NAND still can be used with DIU enabled in the configuration file with the video-mode environment disabled.

---
V2: Remove the ATI enablement when not enable the DIU.

 include/configs/P1022DS.h | 1 +
 1 file changed, 1 insertion(+)
include/configs/P1022DS.h +1 -0
index edece1f..9da9cdf 100644
@@ -413,6 +413,7 @@
 #define CONFIG_SYS_HUSH_PARSER
 
 /* Video */
+#define CONFIG_FSL_DIU_FB
 
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x10000)
Signature · 1 line
1.8.0