regulator: tps65090: get regulators node from parent node only
Subsystems (2)
PATCH 1/1 regulator: tps65090: get regulators node from parent node only
As per the devicetree binding document of TPS65090, the "regulators" subnode should be under the parent node, not outside of parent node. Hence to get the regulator node, the correct call is of_get_child_by_name() rather than of_find_node_by_name() which searches the "regulators" node from the parent node to end of DTS file.
--- drivers/regulator/tps65090-regulator.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/regulator/tps65090-regulator.c +1 -1
@@ -180,7 +180,7 @@ static struct tps65090_platform_data *tps65090_parse_dt_reg_data(return ERR_PTR (-ENOMEM ); } - regulators =of_find_node_by_name (np,"regulators" ); + regulators =of_get_child_by_name (np,"regulators" );if (!regulators) {dev_err (&pdev->dev,"regulator node not found\n" );return ERR_PTR (-ENODEV );
Signature · 1 line
1.7.1.1
PATCH 1/1 regulator: tps6586x: get regulators node from parent node only
As per the devicetree binding document of TPS6586x, the "regulators" subnode should be under the parent node, not outside of parent node. Hence to get the regulator node, the correct call is of_get_child_by_name() rather than of_find_node_by_name() which searches the "regulators" node from the parent node to end of DTS file.
--- drivers/regulator/tps6586x-regulator.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/regulator/tps6586x-regulator.c +1 -1
@@ -298,7 +298,7 @@ static struct tps6586x_platform_data *tps6586x_parse_regulator_dt(struct tps6586x_platform_data *pdata;int err; - regs =of_find_node_by_name (np,"regulators" ); + regs =of_get_child_by_name (np,"regulators" );if (!regs) {dev_err (&pdev->dev,"regulator node not found\n" );return NULL ;
Signature · 1 line
1.7.1.1
PATCH 1/1 regulator: tps65910: get regulators node from parent node only
In reply to Laxman DewanganAs per the devicetree binding document of TPS65910, the "regulators" subnode should be under the parent node, not outside of parent node. Hence to get the regulator node, the correct call is of_get_child_by_name() rather than of_find_node_by_name() which searches the "regulators" node from the parent node to end of DTS file.
--- drivers/regulator/tps65910-regulator.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/regulator/tps65910-regulator.c +1 -1
@@ -982,7 +982,7 @@ static struct tps65910_board *tps65910_parse_dt_reg_data( } np =of_node_get (pdev->dev.parent->of_node); - regulators =of_find_node_by_name (np,"regulators" ); + regulators =of_get_child_by_name (np,"regulators" );if (!regulators) {dev_err (&pdev->dev,"regulator node not found\n" );return NULL ;
Signature · 1 line
1.7.1.1
Quoted 5 lines · Laxman Dewangan
As per the devicetree binding document of TPS65090, the "regulators" subnode should be under the parent node, not outside of parent node. Hence to get the regulator node, the correct call is
of_get_child_by_name()rather thanof_find_node_by_name()which searches the "regulators" node from the parent node to end of DTS file.
Applied all, thanks.