Skip to contentSkip to conversation

mmc: sdhci-esdhc-imx: Check the return value from clk_prepare_enable()

PATCH In review Fabio Estevam 3 participants 4 messages Oct 9, 2013 – Dec 12, 2013

Subsystems (4)
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH v2 1/1 mmc: sdhci-esdhc-imx: Check the return value from clk_prepare_enable()

From: Fabio Estevam <[email protected]>

clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error.

Also, fix the sequence for disabling the clock in the probe error path and also in the remove funct

---
Changes since v1:
- Fix the naming scheme of goto labels

 drivers/mmc/host/sdhci-esdhc-imx.c | 38 ++++++++++++++++++++++++--------------
 1 file changed, 24 insertions(+), 14 deletions(-)
drivers/mmc/host/sdhci-esdhc-imx.c +24 -14
index b9899e9..32b0586 100644
@@ -877,14 +877,22 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 
 	pltfm_host->clk = imx_data->clk_per;
 
-	clk_prepare_enable(imx_data->clk_per);
-	clk_prepare_enable(imx_data->clk_ipg);
-	clk_prepare_enable(imx_data->clk_ahb);
+	err = clk_prepare_enable(imx_data->clk_per);
+	if (err)
+		goto free_sdhci;
+
+	err = clk_prepare_enable(imx_data->clk_ipg);
+	if (err)
+		goto disable_clk_per;
+
+	err = clk_prepare_enable(imx_data->clk_ahb);
+	if (err)
+		goto disable_clk_ipg;
 
 	imx_data->pinctrl = devm_pinctrl_get(&pdev->dev);
 	if (IS_ERR(imx_data->pinctrl)) {
 		err = PTR_ERR(imx_data->pinctrl);
-		goto disable_clk;
+		goto disable_clk_ahb;
 	}
 
 	imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl,
@@ -892,7 +900,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	if (IS_ERR(imx_data->pins_default)) {
 		err = PTR_ERR(imx_data->pins_default);
 		dev_err(mmc_dev(host->mmc), "could not get default state\n");
-		goto disable_clk;
+		goto disable_clk_ahb;
 	}
 
 	host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
@@ -917,7 +925,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		if (!host->mmc->parent->platform_data) {
 			dev_err(mmc_dev(host->mmc), "no board data!\n");
 			err = -EINVAL;
-			goto disable_clk;
+			goto disable_clk_ahb;
 		}
 		imx_data->boarddata = *((struct esdhc_platform_data *)
 					host->mmc->parent->platform_data);
@@ -929,7 +937,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		if (err) {
 			dev_err(mmc_dev(host->mmc),
 				"failed to request write-protect gpio!\n");
-			goto disable_clk;
+			goto disable_clk_ahb;
 		}
 		host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
 	}
@@ -941,7 +949,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		if (err) {
 			dev_err(mmc_dev(host->mmc),
 				"failed to request card-detect gpio!\n");
-			goto disable_clk;
+			goto disable_clk_ahb;
 		}
 		/* fall through */
 
@@ -990,14 +998,16 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 
 	err = sdhci_add_host(host);
 	if (err)
-		goto disable_clk;
+		goto disable_clk_ahb;
 
 	return 0;
 
-disable_clk:
-	clk_disable_unprepare(imx_data->clk_per);
-	clk_disable_unprepare(imx_data->clk_ipg);
+disable_clk_ahb:
 	clk_disable_unprepare(imx_data->clk_ahb);
+disable_clk_ipg:
+	clk_disable_unprepare(imx_data->clk_ipg);
+disable_clk_per:
+	clk_disable_unprepare(imx_data->clk_per);
 free_sdhci:
 	sdhci_pltfm_free(pdev);
 	return err;
@@ -1012,9 +1022,9 @@ static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
 
 	sdhci_remove_host(host, dead);
 
-	clk_disable_unprepare(imx_data->clk_per);
-	clk_disable_unprepare(imx_data->clk_ipg);
 	clk_disable_unprepare(imx_data->clk_ahb);
+	clk_disable_unprepare(imx_data->clk_ipg);
+	clk_disable_unprepare(imx_data->clk_per);
 
 	sdhci_pltfm_free(pdev);
 
Signature · 1 line
1.8.1.2
author reviewer
#2 lore raw

Chris,

Quoted 6 lines · Shawn Guo
Quoted 5 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error.

Quoted 6 lines
Quoted 4 lines

Also, fix the sequence for disabling the clock in the probe error path and also in the remove funct

Any comments on this one?

Regards,

Fabio Estevam

#3 lore raw

Hi Fabio,

Quoted 10 lines · Fabio Estevam

Chris,

Quoted 7 lines · Shawn Guo
Quoted 6 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

Also, fix the sequence for disabling the clock in the probe error path and also in the remove funct

Any comments on this one?

Looks like this one doesn't apply cleanly anymore, sorry for leaving it so long -- please could you submit a new version? Thanks.

- Chris.

Signature · 1 line
Chris Ball   <[email protected]>   <http://printf.net/>