video, formike: change tag/val write
PATCH 1/1 video, formike: change tag/val write
write first the "tag" 8 bit value and then the "val" 8-bit to the display.
Tested on the rut board.
Signed-off-by Heiko Schocher <[email protected]>
Cc Anatolij Gustschin <[email protected]>
--- drivers/video/formike.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/video/formike.c +4 -3
@@ -27,10 +27,11 @@ static int spi_write_tag_val(struct spi_slave *spi, unsigned char tag,int ret; buf[0 ] = tag; - buf[1 ] = val; - flags |=SPI_XFER_END ; + ret =spi_xfer (spi,8 , buf,NULL , flags); + buf[0 ] = val; + flags =SPI_XFER_END ; + ret =spi_xfer (spi,8 , buf,NULL , flags); - ret =spi_xfer (spi,16 , buf,NULL , flags);#ifdef KWH043ST20_F01_SPI_DEBUG printf ("spi_write_tag_val: tag=%02X, val=%02X ret: %d\n" , tag, val, ret);
Signature · 1 line
1.8.3.1
PATCH 1/1 video, formike: change tag/val write
Quoted 10 lines · On Tue, 22 Oct 2013 11:06:24 +0200 Heiko Schocher <[email protected]> wrote:
write first the "tag" 8 bit value and then the "val" 8-bit to the display.
Tested on the rut board.
Signed-off-by Heiko Schocher <[email protected]>Cc Anatolij Gustschin <[email protected]>--- drivers/video/formike.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
applied to u-boot-video/master, thanks!
Anatolij