Skip to contentSkip to conversation

Can't boot

dm-crypt [email protected] 2 participants 2 messages Nov 3, 2013

lore
Share & tools
lore
#0 lore raw

I can't figure out how to subscribe to the list, so I hope that just sending is OK.

I've installed SolydX (Debian), but it won't boot. It never asks me for sda3's password, and after a bit always drops me to (initramfs), saying that no root disk was found. Indeed there is no /dev/mapper/sda3_crypt.

For some reason, on boot it is not setting up the luks disk. My method below works just fine for a SolydK install (KDE), but not for a SolydX install (XFCE).

The installer does not support encryption, so I installed it to partitions:
/boot /dev/sda1 200MB ext3
/ /dev/sda4 1.8TB jfs

While still in the SolydX live DVD:

# cryptsetup luksFormat /dev/sda3
# cryptsetup luksOpen /dev/sda3 sda3_crypt
# mkfs.jfs /dev/mapper/sda3_crypt
# mkdir /media/3
# mount /dev/mapper/sda3_crypt /media/3

Now I copied everything from sda4 (the / install) to sda3

# rsync --archive --hard-links --numeric-ids --progress
/media/solydxk/???/* 3
	# cd /media/3/etc
	In /etc/crypttab (which doesn't exist in SolydX until I create
	it, in contrast with SolydK which has one):
		sda3_crypt      /dev/sda3       none    luks
	In fstab:
		/dev/mapper/sda3_crypt  /       jfs    
		errors=remount-ro,noatime       0 1
	# mount /dev/sda1 /media/3/boot
	# cd /media/3
	# mount -t proc proc proc/
	# mount -t sysfs sys sys/
	# mount -o bind /dev dev/
	# mount -t devpts pts dev/pts/
	# chroot /media/3 /bin/bash

In /etc/initramfs-tools/modules:
dm_mod
dm_crypt
aes_x86_64

Then
# which cryptsetup /usr/bin/cryptsetup
# update-initramfs -k all -u # nano /etc/default/grub and add to GRUB_CMDLINE_LINUX_DEFAULT
ipv6-disable=1
# update-grub

Signature · 1 line
http://www.fastmail.fm - Same, same, but different...
#1 lore raw
Quoted 2 lines · On Sun, Nov 03, 2013 at 18:55:07 CET, [email protected] wrote:

I can't figure out how to subscribe to the list, so I hope that just sending is OK.

Subscription info is at the bottom of
http://code.google.com/p/cryptsetup/

Quoted 3 lines

I've installed SolydX (Debian), but it won't boot. It never asks me for sda3's password, and after a bit always drops me to (initramfs), saying that no root disk was found. Indeed there is no /dev/mapper/sda3_crypt.

Sounds like SolydX just does not support root-on-LUKS. Or maybe you just did not configure it right. But that the installer does not support encryption is a dead giveaway.

Best complain there, not here. Booting to encrypted disk is somethign the distribution has to handle, not cryptsetup.

If you plan to fix this yourself, just make sure cryptsetup and all required libraries are on the initrd, the kernel has the required modules in the initrd. Then open the device with cryptsetup and mount it. Next steps are documented here:

https://www.kernel.org/doc/Documentation/initrd.txt

under "Changing the root device". You can try this manually from the shell you get in the initramfs to figure out what is wrong.

Arno

Quoted 59 lines

For some reason, on boot it is not setting up the luks disk. My method below works just fine for a SolydK install (KDE), but not for a SolydX install (XFCE).

The installer does not support encryption, so I installed it to partitions:
/boot /dev/sda1 200MB ext3
/ /dev/sda4 1.8TB jfs

While still in the SolydX live DVD:

# cryptsetup luksFormat /dev/sda3
# cryptsetup luksOpen /dev/sda3 sda3_crypt
# mkfs.jfs /dev/mapper/sda3_crypt
# mkdir /media/3
# mount /dev/mapper/sda3_crypt /media/3

Now I copied everything from sda4 (the / install) to sda3

# rsync --archive --hard-links --numeric-ids --progress
/media/solydxk/???/* 3
	# cd /media/3/etc
	In /etc/crypttab (which doesn't exist in SolydX until I create
	it, in contrast with SolydK which has one):
		sda3_crypt      /dev/sda3       none    luks
	In fstab:
		/dev/mapper/sda3_crypt  /       jfs    
		errors=remount-ro,noatime       0 1
	# mount /dev/sda1 /media/3/boot
	# cd /media/3
	# mount -t proc proc proc/
	# mount -t sysfs sys sys/
	# mount -o bind /dev dev/
	# mount -t devpts pts dev/pts/
	# chroot /media/3 /bin/bash

In /etc/initramfs-tools/modules:
dm_mod
dm_crypt
aes_x86_64

Then
# which cryptsetup /usr/bin/cryptsetup
# update-initramfs -k all -u # nano /etc/default/grub and add to GRUB_CMDLINE_LINUX_DEFAULT
ipv6-disable=1
# update-grub

Signature · 6 lines
http://www.fastmail.fm - Same, same, but different...

_______________________________________________
dm-crypt mailing list
[email protected]
http://www.saout.de/mailman/listinfo/dm-crypt
Signature · 7 lines
Arno Wagner,     Dr. sc. techn., Dipl. Inform.,    Email: [email protected]
GnuPG: ID: CB5D9718  FP: 12D6 C03B 1B30 33BB 13CF  B774 E35C 5FA1 CB5D 9718
----
There are two ways of constructing a software design: One way is to make it
so simple that there are obviously no deficiencies, and the other way is to
make it so complicated that there are no obvious deficiencies. The first
method is far more difficult.  --Tony Hoare