Skip to contentSkip to conversation

i2c: mxs_i2c: Squash endless loop

PATCH New Marek Vasut 2 participants 2 messages Nov 4, 2013 – Nov 13, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 i2c: mxs_i2c: Squash endless loop

The endless waiting for a bit to be set can cause a hang, add a timeout so we prevent such situation. A testcase for such a hang is below. The testcase assumes a device to be present at address 0x50 and a device to NOT be present at address 0x42 . Also note that the "sleep 1" induced delays are imperative for this bug to manifest .

i2c read 0x42 0x0.2 0x10 0x42000000 ; sleep 1 ; \
i2c read 0x50 0x0.2 0x10 0x42000000 ; sleep 1 ; \
i2c read 0x42 0x0.2 0x10 0x42000000

The expected result of the above command is:

Error reading the chip.
Error reading the chip.

While without this patch, we observe a hang in the last read from 0x42 precisely when waiting for this bit to be set.

Cc Fabio Estevam <[email protected]>
Cc Heiko Schocher <[email protected]>
Cc Stefano Babic <[email protected]>
---
 drivers/i2c/mxs_i2c.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

V2: Replace -EINVAL with -ETIMEDOUT

drivers/i2c/mxs_i2c.c +12 -3
index 46106b7..a298c95 100644
@@ -150,6 +150,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
 	struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE;
 	uint32_t tmp = 0;
+	int timeout = MXS_I2C_MAX_TIMEOUT;
 	int ret;
 	int i;
 
@@ -169,9 +170,17 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 
 	for (i = 0; i < len; i++) {
 		if (!(i & 3)) {
-			while (readl(&i2c_regs->hw_i2c_queuestat) &
-				I2C_QUEUESTAT_RD_QUEUE_EMPTY)
-				;
+			while (--timeout) {
+				tmp = readl(&i2c_regs->hw_i2c_queuestat);
+				if (!(tmp & I2C_QUEUESTAT_RD_QUEUE_EMPTY))
+					break;
+			}
+
+			if (!timeout) {
+				debug("MXS I2C: Failed receiving data!\n");
+				return -ETIMEDOUT;
+			}
+
 			tmp = readl(&i2c_regs->hw_i2c_queuedata);
 		}
 		buffer[i] = tmp & 0xff;
Signature · 1 line
1.8.4.rc3
#1 lore raw

PATCH v2 1/1 i2c: mxs_i2c: Squash endless loop

Hello Marek,

Am 04.11.2013 14:29, schrieb Marek Vasut:

Quoted 18 lines

The endless waiting for a bit to be set can cause a hang, add a timeout so we prevent such situation. A testcase for such a hang is below. The testcase assumes a device to be present at address 0x50 and a device to NOT be present at address 0x42 . Also note that the "sleep 1" induced delays are imperative for this bug to manifest .

i2c read 0x42 0x0.2 0x10 0x42000000 ; sleep 1 ; \
i2c read 0x50 0x0.2 0x10 0x42000000 ; sleep 1 ; \
i2c read 0x42 0x0.2 0x10 0x42000000

The expected result of the above command is:

Error reading the chip.
Error reading the chip.

While without this patch, we observe a hang in the last read from 0x42 precisely when waiting for this bit to be set.

Quoted 8 lines
Cc Fabio Estevam<[email protected]>
Cc Heiko Schocher<[email protected]>
Cc Stefano Babic<[email protected]>

---
drivers/i2c/mxs_i2c.c | 15 ++++++++++++---

  1 file changed, 12 insertions(+), 3 deletions(-)

Thanks!

Applied to u-boot-i2c.git

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany