Skip to contentSkip to conversation

imx-common: remove extraneous semicolon from macro

PATCH New Eric Nelson 2 participants 2 messages Nov 8, 2013 – Nov 27, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 imx-common: remove extraneous semicolon from macro

---
This was clearly a typo.

 arch/arm/imx-common/cpu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/imx-common/cpu.c +2 -2
index 0cd2538..9231649 100644
@@ -51,9 +51,9 @@ char *get_reset_cause(void)
 
 #if defined(CONFIG_MX53) || defined(CONFIG_MX6)
 #if defined(CONFIG_MX53)
-#define MEMCTL_BASE	ESDCTL_BASE_ADDR;
+#define MEMCTL_BASE	ESDCTL_BASE_ADDR
 #else
-#define MEMCTL_BASE	MMDC_P0_BASE_ADDR;
+#define MEMCTL_BASE	MMDC_P0_BASE_ADDR
 #endif
 static const unsigned char col_lookup[] = {9, 10, 11, 8, 12, 9, 9, 9};
 static const unsigned char bank_lookup[] = {3, 2};
Signature · 1 line
1.8.1.2
#1 lore raw

PATCH 1/1 imx-common: remove extraneous semicolon from macro

Quoted 2 lines · Eric Nelson

---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================