refpolicy: Add generic refpolicy recipe with configurable policy type.
RFC 1/1 refpolicy: Add generic refpolicy recipe with configurable policy type.
This RFC is a significant departure from the way the policy packages are currently set up. The noteworthy differences are:
1) the POLICY_TYPE variable can be set as configuration outside the policy recipe
2) a single refpolicy recipe can be used to build all 3 policy types
3) DEFAULT_POLICY from selinux-config can be set outside the config recipe
4) refpolicy depends on the config and sets the DEFAULT_POLICY accordingly
This approach was taken to allow the use of a policy type beyond MLS. I've left the other refpolicy-* recipes in tact but if this approach is acceptable they could be removed if we're willing to accept the limitation that only one policy may be installed on a given image. If this limitation isn't \
acceptable then they can be left as is.
Comments and input would be appreciated.
Cheers,
- Philip
--- .../packagegroups/packagegroup-selinux-minimal.bb | 3 +-- recipes-security/refpolicy/refpolicy_2.20130424.bb | 19 +++++++++++++++++++ recipes-security/selinux/selinux-config_0.1.bb | 2 +- 3 files changed, 21 insertions(+), 3 deletions(-) create mode 100644 recipes-security/refpolicy/refpolicy_2.20130424.bb
recipes-security/packagegroups/packagegroup-selinux-minimal.bb +1 -2
@@ -13,6 +13,5 @@ ALLOW_EMPTY_${PN} = "1" RDEPENDS_${PN} = "\ policycoreutils-semodule \ policycoreutils-sestatus \ - selinux-config \ - refpolicy-mls \ + refpolicy \ "
recipes-security/refpolicy/refpolicy_2.20130424.bb new file +19 -0
@@ -0,0 +1,19 @@ +SUMMARY = "The SELinux reference policy." +DESCRIPTION = "\ +This is the reference policy for the SELinux mandatory access control \ +system. There are 3 supported policy types: standard, MCS and MLS. The \ +standard policy is the most simple of the three providing the standard \ +type enforcement policy. The MCS policy adds an additional element to the \ +SELinux label called a category. Finally the MLS variant allows giving data \ +labels such as \"Top Secret\" and preventing such data from leaking to \ +processes or files with lower classification. \ +" + +PR = "r0" + +POLICY_TYPE ??= "mls" +DEFAULT_POLICY = "${POLICY_TYPE}" + +RDEPENDS_${PN} = "selinux-config" + +include refpolicy_${PV}.inc
recipes-security/selinux/selinux-config_0.1.bb +1 -1
@@ -1,4 +1,4 @@ -DEFAULT_POLICY = "mls" +DEFAULT_POLICY ??= "mls" SUMMARY = "SELinux configuration" DESCRIPTION = "\
Signature · 1 line
1.7.10.4
This requires a few tweaks before it will work as advertised. I had a variable set in a distro.conf that interfered. I'll send out a v2 in a bit.
- Philip
Quoted 74 lines · Philip Tricca
This RFC is a significant departure from the way the policy packages are currently set up. The noteworthy differences are:
1) thePOLICY_TYPEvariable can be set as configuration outside the policy recipe
2) a single refpolicy recipe can be used to build all 3 policy types
3)DEFAULT_POLICYfrom selinux-config can be set outside the config recipe
4) refpolicy depends on the config and sets theDEFAULT_POLICYaccordinglyThis approach was taken to allow the use of a policy type beyond MLS. I've left the other refpolicy-* recipes in tact but if this approach is acceptable they could be removed if we're willing to accept the limitation that only one policy may be installed on a given image. If this limitation isn't \
acceptable then they can be left as is.Comments and input would be appreciated.
Cheers,
- PhilipSigned-off-by Philip Tricca <[email protected]>--- .../packagegroups/packagegroup-selinux-minimal.bb | 3 +-- recipes-security/refpolicy/refpolicy_2.20130424.bb | 19 +++++++++++++++++++ recipes-security/selinux/selinux-config_0.1.bb | 2 +- 3 files changed, 21 insertions(+), 3 deletions(-) create mode 100644 recipes-security/refpolicy/refpolicy_2.20130424.bbrecipes-security/packagegroups/packagegroup-selinux-minimal.bb +1
-2@@ -13,6 +13,5 @@ ALLOW_EMPTY_${PN} = "1" RDEPENDS_${PN} = "\ policycoreutils-semodule \ policycoreutils-sestatus \ - selinux-config \ - refpolicy-mls \ + refpolicy \ "recipes-security/refpolicy/refpolicy_2.20130424.bb new file +19
-0@@ -0,0 +1,19 @@ +SUMMARY = "The SELinux reference policy." +DESCRIPTION = "\ +This is the reference policy for the SELinux mandatory access control \ +system. There are 3 supported policy types: standard, MCS and MLS. The \ +standard policy is the most simple of the three providing the standard \ +type enforcement policy. The MCS policy adds an additional element to the \ +SELinux label called a category. Finally the MLS variant allows giving data \ +labels such as \"Top Secret\" and preventing such data from leaking to \ +processes or files with lower classification. \ +" + +PR = "r0" + +POLICY_TYPE ??= "mls" +DEFAULT_POLICY = "${POLICY_TYPE}" + +RDEPENDS_${PN} = "selinux-config" + +include refpolicy_${PV}.increcipes-security/selinux/selinux-config_0.1.bb +1
-1@@ -1,4 +1,4 @@ -DEFAULT_POLICY = "mls" +DEFAULT_POLICY ??= "mls" SUMMARY = "SELinux configuration" DESCRIPTION = "\