Skip to contentSkip to conversation

PCI: Init NumVFs register to zero in sriov_init()

PATCH New ethan.zhao 1 participant 1 message Nov 21, 2013 PCI

lore
Share & tools
lore

ethan.zhao

author
#0 lore raw

PATCH v2 1/1 PCI: Init NumVFs register to zero in sriov_init()

Though no specification about NumVFs register initial value after POST, to void the confusion lspci output as following before VF was enabled, we should clear the NumVFs value left by BIOS to zero:

#lspci -vvvxxx -s 13:00.0
13:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) Subsystem: Oracle/SUN Ethernet Server Adapter X520-2 ~
Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
IOVSta: Migration-
Initial VFs: 64, Total VFs: 64, Number of VFs: 64, Function Dependency Link: 00
^dazed !
140: 03 00 01 15 c4 24 c8 ff ff 21 1b 00 00 00 00 00
150: 0e 00 01 16 00 01 00 00 00 00 00 00 00 00 00 00
160: 10 00 01 00 00 00 00 00 10 00 00 00 40 00 40 00
^ ^Total VFs
Initial VFs
170: 40 00 00 00 80 00 02 00 00 00 ed 10 53 05 00 00
^Number of VFs

~
V2: Rivised description.

---
 drivers/pci/iov.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/pci/iov.c +2 -0
index de8ffac..a4941ad 100644
@@ -439,6 +439,8 @@ static int sriov_init(struct pci_dev *dev, int pos)
 
 found:
 	pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, ctrl);
+	/* VF Enable is cleared, so we could init the NumVFs register to 0 */
+	pci_write_config_word(dev, pos + PCI_SRIOV_NUM_VF, 0);
 	pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &offset);
 	pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &stride);
 	if (!offset || (total > 1 && !stride))
Signature · 1 line
1.8.3.4 (Apple Git-47)