treewide: Fix typo in Kconfig
Subsystems (13)
PATCH 1/1 treewide: Fix typo in Kconfig
Correct spelling typo within various drivers.
Signed-off-by Masanari Iida <[email protected]>
--- arch/arm/mach-at91/Kconfig.non_dt | 2 +- arch/x86/Kconfig | 2 +- arch/xtensa/Kconfig | 2 +- drivers/gpu/drm/i915/Kconfig | 2 +- drivers/i2c/busses/Kconfig | 2 +- drivers/isdn/mISDN/Kconfig | 2 +- drivers/scsi/Kconfig | 4 ++-- drivers/xen/Kconfig | 2 +- net/atm/Kconfig | 2 +- net/netfilter/ipset/Kconfig | 2 +- 10 files changed, 11 insertions(+), 11 deletions(-)
arch/arm/mach-at91/Kconfig.non_dt +1 -1
@@ -241,7 +241,7 @@ config MACH_PCONTROL_G20 bool "PControl G20 CPU module" help Select this if you are using taskit's Stamp9G20 CPU module on this - carrier board, beeing the decentralized unit of a building automation + carrier board, being the decentralized unit of a building automation system; featuring nvram, eth-switch, iso-rs485, display, io config MACH_GSIA18S
arch/x86/Kconfig +1 -1
@@ -952,7 +952,7 @@ config X86_ANCIENT_MCE depends on X86_32 && X86_MCE ---help--- Include support for machine check handling on old Pentium 5 or WinChip - systems. These typically need to be enabled explicitely on the command + systems. These typically need to be enabled explicitly on the command line. config X86_MCE_THRESHOLD
arch/xtensa/Kconfig +1 -1
@@ -117,7 +117,7 @@ config HAVE_SMP the CPU core definition and currently needs to be selected manually. Multiprocessor support in implemented with external cache and - interrupt controlers. + interrupt controllers. The MX interrupt distributer adds Interprocessor Interrupts and causes the IRQ numbers to be increased by 4 for devices
drivers/gpu/drm/i915/Kconfig +1 -1
@@ -43,7 +43,7 @@ config DRM_I915_KMS like intelfb. config DRM_I915_FBDEV - bool "Enable legacy fbdev support for the modesettting intel driver" + bool "Enable legacy fbdev support for the modesetting intel driver" depends on DRM_I915 select DRM_KMS_FB_HELPER select FB_CFB_FILLRECT
drivers/i2c/busses/Kconfig +1 -1
@@ -354,7 +354,7 @@ config I2C_BCM_KONA If you say yes to this option, support will be included for the I2C interface on the Broadcom Kona family of processors. - If you do not need KONA I2C inteface, say N. + If you do not need KONA I2C interface, say N. config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support"
drivers/isdn/mISDN/Kconfig +1 -1
@@ -17,7 +17,7 @@ config MISDN_DSP This module may be used for special applications that require cross connecting of bchannels, conferencing, dtmf decoding, - echo cancelation, tone generation, and Blowfish encryption and + echo cancellation, tone generation, and Blowfish encryption and decryption. It may use hardware features if available. E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu
drivers/scsi/Kconfig +2 -2
@@ -204,9 +204,9 @@ config SCSI_MULTI_LUN Some devices support more than one LUN (Logical Unit Number) in order to allow access to several media, e.g. CD jukebox, USB card reader, mobile phone in mass storage mode. This option forces the kernel to - probe for all LUNs by default. This setting can be overriden by + probe for all LUNs by default. This setting can be overridden by max_luns boot/module parameter. Note that this option does not affect - devices conforming to SCSI-3 or higher as they can explicitely report + devices conforming to SCSI-3 or higher as they can explicitly report their number of LUNs. It is safe to say Y here unless you have one of those rare devices which reacts in an unexpected way when probed for multiple LUNs.
drivers/xen/Kconfig +1 -1
@@ -222,7 +222,7 @@ config XEN_ACPI_PROCESSOR To do that the driver parses the Power Management data and uploads said information to the Xen hypervisor. Then the Xen hypervisor can - select the proper Cx and Pxx states. It also registers itslef as the + select the proper Cx and Pxx states. It also registers itself as the SMM so that other drivers (such as ACPI cpufreq scaling driver) will not load.
net/atm/Kconfig +1 -1
@@ -35,7 +35,7 @@ config ATM_CLIP_NO_ICMP cannot be reached because there is no VC to it in the kernel's ATMARP table. This may cause problems when ATMARP table entries are briefly removed during revalidation. If you say Y here, packets to - such neighbours are silently discarded instead. + such neighbors are silently discarded instead. config ATM_LANE tristate "LAN Emulation (LANE) support"
net/netfilter/ipset/Kconfig +1 -1
@@ -21,7 +21,7 @@ config IP_SET_MAX You can define here default value of the maximum number of IP sets for the kernel. - The value can be overriden by the 'max_sets' module + The value can be overridden by the 'max_sets' module parameter of the 'ip_set' module. config IP_SET_BITMAP_IP
Signature · 1 line
1.8.5.rc1.28.g7061504
Quoted 11 lines · Masanari Iida
Correct spelling typo within various drivers.
Signed-off-by Masanari Iida <[email protected]>---
net/atm/Kconfig +0
-0
net/atm/Kconfig config ATM_CLIP_NO_ICMP · line 38
Quoted 5 lines
net/atm/Kconfig +1
-1@@ -35,7 +35,7 @@ config ATM_CLIP_NO_ICMP cannot be reached because there is no VC to it in the kernel's ATMARP table. This may cause problems when ATMARP table entries are briefly removed during revalidation. If you say Y here, packets to - such neighbours are silently discarded instead. + such neighbors are silently discarded instead.
We accept British or American spellings for that word, so please leave it as is unless all of the other instances of it are spelled 'neighbor'.
for the rest:
Acked-by Randy Dunlap <[email protected]>
Thanks.
Quoted 3 lines
net/atm/Kconfig +0
-0config ATM_LANE tristate "LAN Emulation (LANE) support"
Signature · 1 line
~Randy
Correct spelling typo in Kconfig.
Signed-off-by Masanari Iida <[email protected]>
--- arch/arm/mach-at91/Kconfig.non_dt | 2 +- arch/x86/Kconfig | 2 +- arch/xtensa/Kconfig | 2 +- drivers/i2c/busses/Kconfig | 2 +- drivers/isdn/mISDN/Kconfig | 2 +- drivers/scsi/Kconfig | 4 ++-- drivers/xen/Kconfig | 2 +- net/netfilter/ipset/Kconfig | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-)
arch/arm/mach-at91/Kconfig.non_dt +1 -1
@@ -241,7 +241,7 @@ config MACH_PCONTROL_G20 bool "PControl G20 CPU module" help Select this if you are using taskit's Stamp9G20 CPU module on this - carrier board, beeing the decentralized unit of a building automation + carrier board, being the decentralized unit of a building automation system; featuring nvram, eth-switch, iso-rs485, display, io config MACH_GSIA18S
arch/x86/Kconfig +1 -1
@@ -952,7 +952,7 @@ config X86_ANCIENT_MCE depends on X86_32 && X86_MCE ---help--- Include support for machine check handling on old Pentium 5 or WinChip - systems. These typically need to be enabled explicitely on the command + systems. These typically need to be enabled explicitly on the command line. config X86_MCE_THRESHOLD
arch/xtensa/Kconfig +1 -1
@@ -117,7 +117,7 @@ config HAVE_SMP the CPU core definition and currently needs to be selected manually. Multiprocessor support in implemented with external cache and - interrupt controlers. + interrupt controllers. The MX interrupt distributer adds Interprocessor Interrupts and causes the IRQ numbers to be increased by 4 for devices
drivers/i2c/busses/Kconfig +1 -1
@@ -354,7 +354,7 @@ config I2C_BCM_KONA If you say yes to this option, support will be included for the I2C interface on the Broadcom Kona family of processors. - If you do not need KONA I2C inteface, say N. + If you do not need KONA I2C interface, say N. config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support"
drivers/isdn/mISDN/Kconfig +1 -1
@@ -17,7 +17,7 @@ config MISDN_DSP This module may be used for special applications that require cross connecting of bchannels, conferencing, dtmf decoding, - echo cancelation, tone generation, and Blowfish encryption and + echo cancellation, tone generation, and Blowfish encryption and decryption. It may use hardware features if available. E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu
drivers/scsi/Kconfig +2 -2
@@ -204,9 +204,9 @@ config SCSI_MULTI_LUN Some devices support more than one LUN (Logical Unit Number) in order to allow access to several media, e.g. CD jukebox, USB card reader, mobile phone in mass storage mode. This option forces the kernel to - probe for all LUNs by default. This setting can be overriden by + probe for all LUNs by default. This setting can be overridden by max_luns boot/module parameter. Note that this option does not affect - devices conforming to SCSI-3 or higher as they can explicitely report + devices conforming to SCSI-3 or higher as they can explicitly report their number of LUNs. It is safe to say Y here unless you have one of those rare devices which reacts in an unexpected way when probed for multiple LUNs.
drivers/xen/Kconfig +1 -1
@@ -222,7 +222,7 @@ config XEN_ACPI_PROCESSOR To do that the driver parses the Power Management data and uploads said information to the Xen hypervisor. Then the Xen hypervisor can - select the proper Cx and Pxx states. It also registers itslef as the + select the proper Cx and Pxx states. It also registers itself as the SMM so that other drivers (such as ACPI cpufreq scaling driver) will not load.
net/netfilter/ipset/Kconfig +1 -1
@@ -21,7 +21,7 @@ config IP_SET_MAX You can define here default value of the maximum number of IP sets for the kernel. - The value can be overriden by the 'max_sets' module + The value can be overridden by the 'max_sets' module parameter of the 'ip_set' module. config IP_SET_BITMAP_IP
Signature · 1 line
1.8.5.rc1.28.g7061504