Staging: bcm: DDRInit: added spaces around operators.
PATCH 4/9 Staging: bcm: DDRInit: added spaces around operators.
This is the fourth patch of a series.
Signed-off-by Gary Alan Rookard <[email protected]>
---
On branch-staging-next
drivers/staging/bcm/DDRInit.c | 86 +++++++++++++++++++++---------------------- 1 file changed, 43 insertions(+), 43 deletions(-)
drivers/staging/bcm/DDRInit.c +43 -43
@@ -7,7 +7,7 @@//DDR INIT-133Mhz #define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 //index for 0x0F007000 -static struct bcm_ddr_setting asT3_DDRSetting133MHz[]= {// # DPLL Clock Setting +static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = {// # DPLL Clock Setting {0x0F000800 ,0x00007212 }, {0x0f000820 ,0x07F13FFF }, {0x0f000810 ,0x00000F95 },
@@ -65,7 +65,7 @@ static struct bcm_ddr_setting asT3_DDRSetting133MHz[]= {// # DPLL Clock Set };//80Mhz #define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 //index for 0x0F007000 -static struct bcm_ddr_setting asT3_DDRSetting80MHz[]= {// # DPLL Clock Setting +static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = {// # DPLL Clock Setting {0x0f000810 ,0x00000F95 }, {0x0f000820 ,0x07f1ffff }, {0x0f000860 ,0x00000000 },
@@ -117,7 +117,7 @@ static struct bcm_ddr_setting asT3_DDRSetting80MHz[]= {// # DPLL Clock Setting };//100Mhz #define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 //index for 0x0F007000 -static struct bcm_ddr_setting asT3_DDRSetting100MHz[]= {// # DPLL Clock Setting +static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {// # DPLL Clock Setting {0x0F000800 ,0x00007008 }, {0x0f000810 ,0x00000F95 }, {0x0f000820 ,0x07F13E3F },
@@ -356,7 +356,7 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock S#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[]= {// # DPLL Clock Setting +static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = {// # DPLL Clock Setting {0x0f000820 ,0x03F1365B }, {0x0f000810 ,0x00002F95 }, {0x0f000880 ,0x000003DD },
@@ -416,7 +416,7 @@ static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[]= {// # DPLL Clock Settin };#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[]= {// # DPLL Clock Setting +static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = {// # DPLL Clock Setting {0x0f000810 ,0x00002F95 }, {0x0f000820 ,0x03F1369B }, {0x0f000840 ,0x0fff0000 },
@@ -476,7 +476,7 @@ static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[]= {// # DPLL Clock Settin };#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[]= {// # DPLL Clock Setting +static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = {// # DPLL Clock Setting {0x0f000820 ,0x07F13FFF }, {0x0f000810 ,0x00002F95 }, {0x0f000860 ,0x00000000 },
@@ -536,7 +536,7 @@ static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[]= {// # DPLL Clock Setting///T3 LP-B (UMA-B) #define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[]= {// # DPLL Clock Setting +static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {// # DPLL Clock Setting {0x0f000820 ,0x03F137DB }, {0x0f000810 ,0x01842795 },
@@ -594,7 +594,7 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[]= {// # DPLL Clock Setti#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[]= {// # DPLL Clock Setting +static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = {// # DPLL Clock Setting {0x0f000820 ,0x03F1365B }, {0x0f000810 ,0x00002F95 }, {0x0f000880 ,0x000003DD },
@@ -655,7 +655,7 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[]= {// # DPLL Clock Setti };#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[]= {// # DPLL Clock Setting +static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = {// # DPLL Clock Setting {0x0f000810 ,0x00002F95 }, {0x0f000820 ,0x03F1369B }, {0x0f000840 ,0x0fff0000 },
@@ -716,7 +716,7 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[]= {// # DPLL Clock Setti };#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[]= {// # DPLL Clock Setting +static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = {// # DPLL Clock Setting {0x0f000820 ,0x07F13FFF }, {0x0f000810 ,0x00002F95 }, {0x0f000860 ,0x00000000 },
@@ -774,8 +774,8 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[]= {// # DPLL Clock Settinint ddr_init (struct bcm_mini_adapter *Adapter) { -struct bcm_ddr_setting *psDDRSetting=NULL ; -ULONG RegCount=0 ; +struct bcm_ddr_setting *psDDRSetting =NULL ; +ULONG RegCount =0 ;UINT value =0 ;UINT uiResetValue =0 ;UINT uiClockSetting =0 ;
@@ -787,18 +787,18 @@ int ddr_init(struct bcm_mini_adapter *Adapter)switch (Adapter->DDRSetting) {case DDR_80_MHZ : - psDDRSetting=asT3LP_DDRSetting80MHz; - RegCount=(sizeof (asT3LP_DDRSetting80MHz)/ + psDDRSetting = asT3LP_DDRSetting80MHz; + RegCount = (sizeof (asT3LP_DDRSetting80MHz)/sizeof (struct bcm_ddr_setting ));break ;case DDR_100_MHZ : - psDDRSetting=asT3LP_DDRSetting100MHz; - RegCount=(sizeof (asT3LP_DDRSetting100MHz)/ + psDDRSetting = asT3LP_DDRSetting100MHz; + RegCount = (sizeof (asT3LP_DDRSetting100MHz)/sizeof (struct bcm_ddr_setting ));break ;case DDR_133_MHZ : - psDDRSetting=asT3LP_DDRSetting133MHz; - RegCount=(sizeof (asT3LP_DDRSetting133MHz)/ + psDDRSetting = asT3LP_DDRSetting133MHz; + RegCount = (sizeof (asT3LP_DDRSetting133MHz)/sizeof (struct bcm_ddr_setting ));if (Adapter->bMipsConfig ==MIPS_200_MHZ ) {
@@ -818,7 +818,7 @@ int ddr_init(struct bcm_mini_adapter *Adapter)case BCS220_2 :case BCS220_2BC :case BCS250_BC : -case BCS220_3 : +case BCS220_3 :/* Set bit 2 and bit 6 to 1 for BBIC 2mA drive * (please check current value and additionally set these bits) */
@@ -826,7 +826,7 @@ int ddr_init(struct bcm_mini_adapter *Adapter) (Adapter->chip_id != BCS220_2BC) && (Adapter->chip_id != BCS220_3) ) { - retval=rdmalt (Adapter, (UINT )0x0f000830 , &uiResetValue,sizeof (uiResetValue)); + retval =rdmalt (Adapter, (UINT )0x0f000830 , &uiResetValue,sizeof (uiResetValue));if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval;
@@ -845,17 +845,17 @@ int ddr_init(struct bcm_mini_adapter *Adapter)case DDR_80_MHZ : psDDRSetting = asT3LPB_DDRSetting80MHz; - RegCount=(sizeof (asT3B_DDRSetting80MHz)/ + RegCount = (sizeof (asT3B_DDRSetting80MHz)/sizeof (struct bcm_ddr_setting ));break ;case DDR_100_MHZ : - psDDRSetting=asT3LPB_DDRSetting100MHz; - RegCount=(sizeof (asT3B_DDRSetting100MHz)/ + psDDRSetting = asT3LPB_DDRSetting100MHz; + RegCount = (sizeof (asT3B_DDRSetting100MHz)/sizeof (struct bcm_ddr_setting ));break ;case DDR_133_MHZ : psDDRSetting = asT3LPB_DDRSetting133MHz; - RegCount=(sizeof (asT3B_DDRSetting133MHz)/ + RegCount = (sizeof (asT3B_DDRSetting133MHz)/sizeof (struct bcm_ddr_setting ));if (Adapter->bMipsConfig ==MIPS_200_MHZ )
@@ -915,12 +915,12 @@ int ddr_init(struct bcm_mini_adapter *Adapter) {case DDR_80_MHZ : psDDRSetting = asT3B_DDRSetting80MHz; - RegCount=(sizeof (asT3B_DDRSetting80MHz)/ + RegCount = (sizeof (asT3B_DDRSetting80MHz)/sizeof (struct bcm_ddr_setting ));break ;case DDR_100_MHZ : - psDDRSetting=asT3B_DDRSetting100MHz; - RegCount=(sizeof (asT3B_DDRSetting100MHz)/ + psDDRSetting = asT3B_DDRSetting100MHz; + RegCount = (sizeof (asT3B_DDRSetting100MHz)/sizeof (struct bcm_ddr_setting ));break ;case DDR_133_MHZ :
@@ -930,13 +930,13 @@ int ddr_init(struct bcm_mini_adapter *Adapter)memcpy (asT3B_DDRSetting133MHz, asDPLL_266MHZ,sizeof (asDPLL_266MHZ)); psDDRSetting = asT3B_DDRSetting133MHz; - RegCount=(sizeof (asT3B_DDRSetting133MHz)/ + RegCount = (sizeof (asT3B_DDRSetting133MHz)/sizeof (struct bcm_ddr_setting )); }else { psDDRSetting = asT3B_DDRSetting133MHz; - RegCount=(sizeof (asT3B_DDRSetting133MHz)/ + RegCount = (sizeof (asT3B_DDRSetting133MHz)/sizeof (struct bcm_ddr_setting ));if (Adapter->bMipsConfig ==MIPS_200_MHZ ) {
@@ -958,7 +958,7 @@ int ddr_init(struct bcm_mini_adapter *Adapter)return -EINVAL ; } - value=0 ; + value =0 ;BCM_DEBUG_PRINT (Adapter,DBG_TYPE_INITEXIT ,DRV_ENTRY ,DBG_LVL_ALL ,"Register Count is =%lu\n" , RegCount);while (RegCount && !retval) {
@@ -984,8 +984,8 @@ int ddr_init(struct bcm_mini_adapter *Adapter) {mdelay (3 ); -if ( (Adapter->chip_id !=BCS220_2 )&& - (Adapter->chip_id !=BCS220_2BC )&& +if ( (Adapter->chip_id !=BCS220_2 ) && + (Adapter->chip_id !=BCS220_2BC ) && (Adapter->chip_id !=BCS220_3 )) {/* drive MDDR to half in case of UMA-B: */
@@ -1101,8 +1101,8 @@ int ddr_init(struct bcm_mini_adapter *Adapter)int download_ddr_settings (struct bcm_mini_adapter *Adapter) { -struct bcm_ddr_setting *psDDRSetting=NULL ; -ULONG RegCount=0 ; +struct bcm_ddr_setting *psDDRSetting =NULL ; +ULONG RegCount =0 ;unsigned long ul_ddr_setting_load_addr =DDR_DUMP_INTERNAL_DEVICE_MEMORY ;UINT value =0 ;int retval =STATUS_SUCCESS ;
@@ -1141,12 +1141,12 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)case BCS220_2 :case BCS220_2BC :case BCS250_BC : -case BCS220_3 : +case BCS220_3 :switch (Adapter->DDRSetting) {case DDR_80_MHZ : psDDRSetting = asT3LPB_DDRSetting80MHz; - RegCount=ARRAY_SIZE (asT3LPB_DDRSetting80MHz); + RegCount =ARRAY_SIZE (asT3LPB_DDRSetting80MHz); RegCount -=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; psDDRSetting +=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;break ;
@@ -1182,19 +1182,19 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)case DDR_80_MHZ : psDDRSetting = asT3_DDRSetting80MHz; RegCount =ARRAY_SIZE (asT3_DDRSetting80MHz); - RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; + RegCount -=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; psDDRSetting +=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;break ;case DDR_100_MHZ : psDDRSetting = asT3_DDRSetting100MHz; RegCount =ARRAY_SIZE (asT3_DDRSetting100MHz); - RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; + RegCount -=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; psDDRSetting +=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;break ;case DDR_133_MHZ : psDDRSetting = asT3_DDRSetting133MHz; RegCount =ARRAY_SIZE (asT3_DDRSetting133MHz); - RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; + RegCount -=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; psDDRSetting +=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;break ;default :
@@ -1231,7 +1231,7 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)return -EINVAL ; }//total number of Register that has to be dumped - value =RegCount ; + value = RegCount ; retval =wrmalt (Adapter, ul_ddr_setting_load_addr, &value,sizeof (value));if (retval) {
@@ -1241,7 +1241,7 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter) } ul_ddr_setting_load_addr +=sizeof (ULONG );/*signature */ - value =(0x1d1e0dd0 ); + value = (0x1d1e0dd0 ); retval =wrmalt (Adapter, ul_ddr_setting_load_addr, &value,sizeof (value));if (retval) {
@@ -1250,7 +1250,7 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter) } ul_ddr_setting_load_addr +=sizeof (ULONG ); - RegCount*=(sizeof (struct bcm_ddr_setting )/sizeof (ULONG )); + RegCount *= (sizeof (struct bcm_ddr_setting )/sizeof (ULONG ));while (RegCount && !retval) {
@@ -1261,7 +1261,7 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter) {if (bOverrideSelfRefresh && (psDDRSetting->ulRegAddress ==0x0F007018 )) { - value = (psDDRSetting->ulRegValue |(1 <<8 )); + value = (psDDRSetting->ulRegValue | (1 <<8 ));if (STATUS_SUCCESS !=wrmalt (Adapter, ul_ddr_setting_load_addr, &value,sizeof (value))){BCM_DEBUG_PRINT (Adapter,DBG_TYPE_PRINTK ,0 ,0 ,"%s:%d\n" , __func__, __LINE__);
Signature · 1 line
1.8.4