ARM: dts: msm: Fix gpio interrupt and reg length
Subsystems (2)
PATCH 1/1 ARM: dts: msm: Fix gpio interrupt and reg length
The summary interrupt is #16 in the SPI space. Unfortunately, when this device was translated from board files to DT we forgot to subtract 16 from the interrupt number to translate it into a SPI interrupt. Also, the register space is larger than 4k, increase it appropriately so that the gpio driver doesn't try to access registers outside of its mapping.
Signed-off-by Stephen Boyd <[email protected]>
--- arch/arm/boot/dts/qcom-msm8660-surf.dts | 4 ++-- arch/arm/boot/dts/qcom-msm8960-cdp.dts | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/qcom-msm8660-surf.dts +2 -2
@@ -30,11 +30,11 @@ msmgpio: gpio at 800000 { compatible = "qcom,msm-gpio"; - reg = <0x00800000 0x1000>; + reg = <0x00800000 0x4000>; gpio-controller; #gpio-cells = <2>; ngpio = <173>; - interrupts = <0 32 0x4>; + interrupts = <0 16 0x4>; interrupt-controller; #interrupt-cells = <2>; };
arch/arm/boot/dts/qcom-msm8960-cdp.dts +1 -1
@@ -33,7 +33,7 @@ gpio-controller; #gpio-cells = <2>; ngpio = <150>; - interrupts = <0 32 0x4>; + interrupts = <0 16 0x4>; interrupt-controller; #interrupt-cells = <2>; reg = <0x800000 0x4000>;
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation