Writing to flash device from ELDK Linux Shell prompt
Hi ,
Is it possible to copy(store) a binary file into the flash device from the Linux shell prompt of ELDK.
Thank You,
Verma.
Signature · 2 lines
View this message in context: http://www.nabble.com/Writing-to-flash-device-from-ELDK-Linux-Shell-prompt-tf4848166.html#a13871341 Sent from the Uboot - Users mailing list archive at Nabble.com.
[U-Boot-Users] OT: Re: Writing to flash device from ELDK Linux Shell prompt
Quoted 2 lines · Verma
Is it possible to copy(store) a binary file into the flash device from the Linux shell prompt of ELDK.
This is Off-Topic here!
You can access your Flash using the MTD device structure from Linux:
http://www.linux-mtd.infradead.org/
Regards,
Signature · 10 lines
Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Stra?e 45/1 Linhof Werksgel?nde D-81379 M?nchen Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com
[U-Boot-Users] JFFS2 and UBoot
Hi,
I need some help about JFFS2 and MMU.
I have a writtable JFFS2 partition on a NAND flash. I find that mounting the JFFS2 partition is very slow (about 5 minutes for a partition of 8MB having 133 files) compare with running under Linux.
The MMU is not enabled, neither the DCache.
Should I enable MMU and DCache ? How can I do that ? I've checked the source code on Linux, and it seems very complex.
I'm working on a ARM 926 ejs core and I'm using UBoot V1.1.6.
Thanks for your help,
Yves