regulator: as3722: Don't set min_uV/uV_step/linear_min_sel for linear_ranges
PATCH 1/1 regulator: as3722: Don't set min_uV/uV_step/linear_min_sel for linear_ranges
These settings are not used when using linear_ranges and it makes the code looks confusing. Thus remove them.
Signed-off-by Axel Lin <[email protected]>
--- drivers/regulator/as3722-regulator.c | 3 --- 1 file changed, 3 deletions(-)
drivers/regulator/as3722-regulator.c +0 -3
@@ -842,9 +842,6 @@ static int as3722_regulator_probe(struct platform_device *pdev) ops = &as3722_ldo_extcntrl_ops; else ops = &as3722_ldo_ops; - as3722_regs->desc[id].min_uV =825000 ; - as3722_regs->desc[id].uV_step =25000 ; - as3722_regs->desc[id].linear_min_sel =1 ; as3722_regs->desc[id].enable_time =500 ; as3722_regs->desc[id].linear_ranges = as3722_ldo_ranges; as3722_regs->desc[id].n_linear_ranges =
Signature · 1 line
1.8.1.2
Quoted 2 lines · Axel Lin
These settings are not used when using
linear_rangesand it makes the code looks confusing. Thus remove them.
Looks fine.
Acked-by Laxman Dewangan <[email protected]>
Quoted 2 lines · Axel Lin
These settings are not used when using
linear_rangesand it makes the code looks confusing. Thus remove them.
Applied, thanks.