Skip to contentSkip to conversation

drm/i915: move module parameters into a struct

RFC PATCH In review Jani Nikula 3 participants 7 messages Jan 3, 2014 – Jan 26, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 drm/i915: move module parameters into a struct

With 20+ module parameters I think referring to them via a struct improves clarity. The downsides are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_drv.c.

---
 drivers/gpu/drm/i915/i915_drv.c            |  115 +++++++++++++++-------------
 drivers/gpu/drm/i915/i915_drv.h            |   51 ++++++------
 drivers/gpu/drm/i915/i915_gem.c            |    4 +-
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |    2 +-
 drivers/gpu/drm/i915/i915_gem_gtt.c        |    2 +-
 drivers/gpu/drm/i915/i915_irq.c            |    4 +-
 drivers/gpu/drm/i915/intel_bios.c          |    4 +-
 drivers/gpu/drm/i915/intel_display.c       |   24 +++---
 drivers/gpu/drm/i915/intel_dp.c            |    2 +-
 drivers/gpu/drm/i915/intel_lvds.c          |    6 +-
 drivers/gpu/drm/i915/intel_panel.c         |   15 +---
 drivers/gpu/drm/i915/intel_pm.c            |   14 ++--
 12 files changed, 127 insertions(+), 116 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +63 -52
index 61fb9fc12064..a5965adb1dac 100644
@@ -38,33 +38,53 @@
 #include <linux/module.h>
 #include <drm/drm_crtc_helper.h>
 
-static int i915_modeset __read_mostly = -1;
-module_param_named(modeset, i915_modeset, int, 0400);
+struct i915_module_params i915_params __read_mostly = {
+	.modeset = -1,
+	.fbpercrtc = 0,
+	.panel_ignore_lid = 1,
+	.powersave = 1,
+	.semaphores = -1,
+	.lvds_downclock = 0,
+	.lvds_channel_mode = 0,
+	.panel_use_ssc = -1,
+	.vbt_sdvo_panel_type = -1,
+	.enable_rc6 = -1,
+	.enable_fbc = -1,
+	.enable_hangcheck = true,
+	.enable_ppgtt = -1,
+	.enable_psr = 0,
+	.preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
+	.disable_power_well = 1,
+	.enable_ips = 1,
+	.fastboot = 0,
+	.enable_pc8 = 1,
+	.pc8_timeout = 5000,
+	.prefault_disable = 0,
+	.try_reset = true,
+	.invert_brightness = 0,
+};
+
+module_param_named(modeset, i915_params.modeset, int, 0400);
 MODULE_PARM_DESC(modeset,
 		"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
 		"1=on, -1=force vga console preference [default])");
 
-unsigned int i915_fbpercrtc __always_unused = 0;
-module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
+module_param_named(fbpercrtc, i915_params.fbpercrtc, int, 0400);
 
-int i915_panel_ignore_lid __read_mostly = 1;
-module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
+module_param_named(panel_ignore_lid, i915_params.panel_ignore_lid, int, 0600);
 MODULE_PARM_DESC(panel_ignore_lid,
 		"Override lid status (0=autodetect, 1=autodetect disabled [default], "
 		"-1=force lid closed, -2=force lid open)");
 
-unsigned int i915_powersave __read_mostly = 1;
-module_param_named(powersave, i915_powersave, int, 0600);
+module_param_named(powersave, i915_params.powersave, int, 0600);
 MODULE_PARM_DESC(powersave,
 		"Enable powersavings, fbc, downclocking, etc. (default: true)");
 
-int i915_semaphores __read_mostly = -1;
-module_param_named(semaphores, i915_semaphores, int, 0600);
+module_param_named(semaphores, i915_params.semaphores, int, 0600);
 MODULE_PARM_DESC(semaphores,
 		"Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
 
-int i915_enable_rc6 __read_mostly = -1;
-module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
+module_param_named(i915_enable_rc6, i915_params.enable_rc6, int, 0400);
 MODULE_PARM_DESC(i915_enable_rc6,
 		"Enable power-saving render C-state 6. "
 		"Different stages can be selected via bitmask values "
@@ -72,89 +92,80 @@ MODULE_PARM_DESC(i915_enable_rc6,
 		"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
 		"default: -1 (use per-chip default)");
 
-int i915_enable_fbc __read_mostly = -1;
-module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
+module_param_named(i915_enable_fbc, i915_params.enable_fbc, int, 0600);
 MODULE_PARM_DESC(i915_enable_fbc,
 		"Enable frame buffer compression for power savings "
 		"(default: -1 (use per-chip default))");
 
-unsigned int i915_lvds_downclock __read_mostly = 0;
-module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
+module_param_named(lvds_downclock, i915_params.lvds_downclock, int, 0400);
 MODULE_PARM_DESC(lvds_downclock,
 		"Use panel (LVDS/eDP) downclocking for power savings "
 		"(default: false)");
 
-int i915_lvds_channel_mode __read_mostly;
-module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
+module_param_named(lvds_channel_mode, i915_params.lvds_channel_mode, int, 0600);
 MODULE_PARM_DESC(lvds_channel_mode,
 		 "Specify LVDS channel mode "
 		 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
 
-int i915_panel_use_ssc __read_mostly = -1;
-module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
+module_param_named(lvds_use_ssc, i915_params.panel_use_ssc, int, 0600);
 MODULE_PARM_DESC(lvds_use_ssc,
 		"Use Spread Spectrum Clock with panels [LVDS/eDP] "
 		"(default: auto from VBT)");
 
-int i915_vbt_sdvo_panel_type __read_mostly = -1;
-module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
+module_param_named(vbt_sdvo_panel_type, i915_params.vbt_sdvo_panel_type, int, 0600);
 MODULE_PARM_DESC(vbt_sdvo_panel_type,
 		"Override/Ignore selection of SDVO panel mode in the VBT "
 		"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
 
-static bool i915_try_reset __read_mostly = true;
-module_param_named(reset, i915_try_reset, bool, 0600);
+module_param_named(reset, i915_params.try_reset, bool, 0600);
 MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
 
-bool i915_enable_hangcheck __read_mostly = true;
-module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
+module_param_named(enable_hangcheck, i915_params.enable_hangcheck, bool, 0644);
 MODULE_PARM_DESC(enable_hangcheck,
 		"Periodically check GPU activity for detecting hangs. "
 		"WARNING: Disabling this can cause system wide hangs. "
 		"(default: true)");
 
-int i915_enable_ppgtt __read_mostly = -1;
-module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0400);
+module_param_named(i915_enable_ppgtt, i915_params.enable_ppgtt, int, 0400);
 MODULE_PARM_DESC(i915_enable_ppgtt,
 		"Override PPGTT usage. "
 		"(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
 
-int i915_enable_psr __read_mostly = 0;
-module_param_named(enable_psr, i915_enable_psr, int, 0600);
+module_param_named(enable_psr, i915_params.enable_psr, int, 0600);
 MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
 
-unsigned int i915_preliminary_hw_support __read_mostly = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT);
-module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600);
+module_param_named(preliminary_hw_support, i915_params.preliminary_hw_support, int, 0600);
 MODULE_PARM_DESC(preliminary_hw_support,
 		"Enable preliminary hardware support.");
 
-int i915_disable_power_well __read_mostly = 1;
-module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
+module_param_named(disable_power_well, i915_params.disable_power_well, int, 0600);
 MODULE_PARM_DESC(disable_power_well,
 		 "Disable the power well when possible (default: true)");
 
-int i915_enable_ips __read_mostly = 1;
-module_param_named(enable_ips, i915_enable_ips, int, 0600);
+module_param_named(enable_ips, i915_params.enable_ips, int, 0600);
 MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
 
-bool i915_fastboot __read_mostly = 0;
-module_param_named(fastboot, i915_fastboot, bool, 0600);
+module_param_named(fastboot, i915_params.fastboot, bool, 0600);
 MODULE_PARM_DESC(fastboot, "Try to skip unnecessary mode sets at boot time "
 		 "(default: false)");
 
-int i915_enable_pc8 __read_mostly = 1;
-module_param_named(enable_pc8, i915_enable_pc8, int, 0600);
+module_param_named(enable_pc8, i915_params.enable_pc8, int, 0600);
 MODULE_PARM_DESC(enable_pc8, "Enable support for low power package C states (PC8+) (default: true)");
 
-int i915_pc8_timeout __read_mostly = 5000;
-module_param_named(pc8_timeout, i915_pc8_timeout, int, 0600);
+module_param_named(pc8_timeout, i915_params.pc8_timeout, int, 0600);
 MODULE_PARM_DESC(pc8_timeout, "Number of msecs of idleness required to enter PC8+ (default: 5000)");
 
-bool i915_prefault_disable __read_mostly;
-module_param_named(prefault_disable, i915_prefault_disable, bool, 0600);
+module_param_named(prefault_disable, i915_params.prefault_disable, bool, 0600);
 MODULE_PARM_DESC(prefault_disable,
 		"Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only.");
 
+MODULE_PARM_DESC(invert_brightness, "Invert backlight brightness "
+	"(-1 force normal, 0 machine defaults, 1 force inversion), please "
+	"report PCI device ID, subsystem vendor and subsystem device ID "
+	"to [email protected], if your machine needs it. "
+	"It will then be included in an upcoming module version.");
+module_param_named(invert_brightness, i915_params.invert_brightness, int, 0600);
+
 static struct drm_driver driver;
 
 static const struct intel_device_info intel_i830_info = {
@@ -485,12 +496,12 @@ bool i915_semaphore_is_enabled(struct drm_device *dev)
 
 	/* Until we get further testing... */
 	if (IS_GEN8(dev)) {
-		WARN_ON(!i915_preliminary_hw_support);
+		WARN_ON(!i915_params.preliminary_hw_support);
 		return false;
 	}
 
-	if (i915_semaphores >= 0)
-		return i915_semaphores;
+	if (i915_params.semaphores >= 0)
+		return i915_params.semaphores;
 
 #ifdef CONFIG_INTEL_IOMMU
 	/* Enable semaphores on SNB when IO remapping is off */
@@ -755,7 +766,7 @@ int i915_reset(struct drm_device *dev)
 	bool simulated;
 	int ret;
 
-	if (!i915_try_reset)
+	if (!i915_params.try_reset)
 		return 0;
 
 	mutex_lock(&dev->struct_mutex);
@@ -823,7 +834,7 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct intel_device_info *intel_info =
 		(struct intel_device_info *) ent->driver_data;
 
-	if (IS_PRELIMINARY_HW(intel_info) && !i915_preliminary_hw_support) {
+	if (IS_PRELIMINARY_HW(intel_info) && !i915_params.preliminary_hw_support) {
 		DRM_INFO("This hardware requires preliminary hardware support.\n"
 			 "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
 		return -ENODEV;
@@ -1046,14 +1057,14 @@ static int __init i915_init(void)
 	 * the default behavior.
 	 */
 #if defined(CONFIG_DRM_I915_KMS)
-	if (i915_modeset != 0)
+	if (i915_params.modeset != 0)
 		driver.driver_features |= DRIVER_MODESET;
 #endif
-	if (i915_modeset == 1)
+	if (i915_params.modeset == 1)
 		driver.driver_features |= DRIVER_MODESET;
 
 #ifdef CONFIG_VGA_CONSOLE
-	if (vgacon_text_force() && i915_modeset == -1)
+	if (vgacon_text_force() && i915_params.modeset == -1)
 		driver.driver_features &= ~DRIVER_MODESET;
 #endif
 
drivers/gpu/drm/i915/i915_drv.h +29 -22

65 lines not on this page · raw message

drivers/gpu/drm/i915/i915_gem.c +2 -2
index 656406deada0..3107d045831d 100644
@@ -476,7 +476,7 @@ i915_gem_shmem_pread(struct drm_device *dev,
 
 		mutex_unlock(&dev->struct_mutex);
 
-		if (likely(!i915_prefault_disable) && !prefaulted) {
+		if (likely(!i915_params.prefault_disable) && !prefaulted) {
 			ret = fault_in_multipages_writeable(user_data, remain);
 			/* Userspace is tricking us, but we've already clobbered
 			 * its pages with the prefault and promised to write the
@@ -868,7 +868,7 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 		       args->size))
 		return -EFAULT;
 
-	if (likely(!i915_prefault_disable)) {
+	if (likely(!i915_params.prefault_disable)) {
 		ret = fault_in_multipages_readable(to_user_ptr(args->data_ptr),
 						   args->size);
 		if (ret)
drivers/gpu/drm/i915/i915_gem_execbuffer.c +1 -1
index bbff8f9b6549..8f5ff676531b 100644
@@ -896,7 +896,7 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec,
 		if (!access_ok(VERIFY_WRITE, ptr, length))
 			return -EFAULT;
 
-		if (likely(!i915_prefault_disable)) {
+		if (likely(!i915_params.prefault_disable)) {
 			if (fault_in_multipages_readable(ptr, length))
 				return -EFAULT;
 		}
drivers/gpu/drm/i915/i915_gem_gtt.c +1 -1
index 998f9a0b322a..5b4316780104 100644
@@ -1541,7 +1541,7 @@ static inline unsigned int gen8_get_total_gtt_size(u16 bdw_gmch_ctl)
 	if (bdw_gmch_ctl)
 		bdw_gmch_ctl = 1 << bdw_gmch_ctl;
 	if (bdw_gmch_ctl > 4) {
-		WARN_ON(!i915_preliminary_hw_support);
+		WARN_ON(!i915_params.preliminary_hw_support);
 		return 4<<20;
 	}
 
drivers/gpu/drm/i915/i915_irq.c +2 -2
index 1d44c793bdf4..4c5a96b807f6 100644
@@ -2474,7 +2474,7 @@ static void i915_hangcheck_elapsed(unsigned long data)
 #define HUNG 20
 #define FIRE 30
 
-	if (!i915_enable_hangcheck)
+	if (!i915_params.enable_hangcheck)
 		return;
 
 	for_each_ring(ring, dev_priv, i) {
@@ -2576,7 +2576,7 @@ static void i915_hangcheck_elapsed(unsigned long data)
 void i915_queue_hangcheck(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	if (!i915_enable_hangcheck)
+	if (!i915_params.enable_hangcheck)
 		return;
 
 	mod_timer(&dev_priv->gpu_error.hangcheck_timer,
drivers/gpu/drm/i915/intel_bios.c +2 -2
index f22041973f3a..285bb0ffa7a2 100644
@@ -259,7 +259,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
 			downclock = dvo_timing->clock;
 	}
 
-	if (downclock < panel_dvo_timing->clock && i915_lvds_downclock) {
+	if (downclock < panel_dvo_timing->clock && i915_params.lvds_downclock) {
 		dev_priv->lvds_downclock_avail = 1;
 		dev_priv->lvds_downclock = downclock * 10;
 		DRM_DEBUG_KMS("LVDS downclock is found in VBT. "
@@ -318,7 +318,7 @@ parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
 	struct drm_display_mode *panel_fixed_mode;
 	int index;
 
-	index = i915_vbt_sdvo_panel_type;
+	index = i915_params.vbt_sdvo_panel_type;
 	if (index == -2) {
 		DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n");
 		return;
drivers/gpu/drm/i915/intel_display.c +12 -12
index 4d1357a32c41..81335a2ecf40 100644
@@ -2368,7 +2368,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	 * whether the platform allows pfit disable with pipe active, and only
 	 * then update the pipesrc and pfit state, even on the flip path.
 	 */
-	if (i915_fastboot) {
+	if (i915_params.fastboot) {
 		const struct drm_display_mode *adjusted_mode =
 			&intel_crtc->config.adjusted_mode;
 
@@ -4553,7 +4553,7 @@ retry:
 static void hsw_compute_ips_config(struct intel_crtc *crtc,
 				   struct intel_crtc_config *pipe_config)
 {
-	pipe_config->ips_enabled = i915_enable_ips &&
+	pipe_config->ips_enabled = i915_params.enable_ips &&
 				   hsw_crtc_supports_ips(crtc) &&
 				   pipe_config->pipe_bpp <= 24;
 }
@@ -4754,8 +4754,8 @@ intel_link_compute_m_n(int bits_per_pixel, int nlanes,
 
 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
 {
-	if (i915_panel_use_ssc >= 0)
-		return i915_panel_use_ssc != 0;
+	if (i915_params.panel_use_ssc >= 0)
+		return i915_params.panel_use_ssc != 0;
 	return dev_priv->vbt.lvds_use_ssc
 		&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
 }
@@ -4814,7 +4814,7 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
 
 	crtc->lowfreq_avail = false;
 	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
-	    reduced_clock && i915_powersave) {
+	    reduced_clock && i915_params.powersave) {
 		I915_WRITE(FP1(pipe), fp2);
 		crtc->config.dpll_hw_state.fp1 = fp2;
 		crtc->lowfreq_avail = true;
@@ -6311,7 +6311,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	if (intel_crtc->config.has_dp_encoder)
 		intel_dp_set_m_n(intel_crtc);
 
-	if (is_lvds && has_reduced_clock && i915_powersave)
+	if (is_lvds && has_reduced_clock && i915_params.powersave)
 		intel_crtc->lowfreq_avail = true;
 	else
 		intel_crtc->lowfreq_avail = false;
@@ -6679,7 +6679,7 @@ static void __hsw_enable_package_c8(struct drm_i915_private *dev_priv)
 		return;
 
 	schedule_delayed_work(&dev_priv->pc8.enable_work,
-			      msecs_to_jiffies(i915_pc8_timeout));
+			      msecs_to_jiffies(i915_params.pc8_timeout));
 }
 
 static void __hsw_disable_package_c8(struct drm_i915_private *dev_priv)
@@ -6778,7 +6778,7 @@ static void hsw_update_package_c8(struct drm_device *dev)
 	if (!HAS_PC8(dev_priv->dev))
 		return;
 
-	if (!i915_enable_pc8)
+	if (!i915_params.enable_pc8)
 		return;
 
 	mutex_lock(&dev_priv->pc8.lock);
@@ -8163,7 +8163,7 @@ void intel_mark_idle(struct drm_device *dev)
 
 	hsw_package_c8_gpu_idle(dev_priv);
 
-	if (!i915_powersave)
+	if (!i915_params.powersave)
 		return;
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
@@ -8183,7 +8183,7 @@ void intel_mark_fb_busy(struct drm_i915_gem_object *obj,
 	struct drm_device *dev = obj->base.dev;
 	struct drm_crtc *crtc;
 
-	if (!i915_powersave)
+	if (!i915_params.powersave)
 		return;
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
@@ -9815,7 +9815,7 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
 			struct intel_crtc *intel_crtc =
 				to_intel_crtc(set->crtc);
 
-			if (intel_crtc->active && i915_fastboot) {
+			if (intel_crtc->active && i915_params.fastboot) {
 				DRM_DEBUG_KMS("crtc has no fb, will flip\n");
 				config->fb_changed = true;
 			} else {
@@ -11197,7 +11197,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 	 */
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list,
 			    base.head) {
-		if (crtc->active && i915_fastboot) {
+		if (crtc->active && i915_params.fastboot) {
 			intel_crtc_mode_from_pipe_config(crtc, &crtc->config);
 
 			DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
drivers/gpu/drm/i915/intel_dp.c +1 -1
index 7df5085973e9..a0755a9f1193 100644
@@ -1661,7 +1661,7 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
 		return false;
 	}
 
-	if (!i915_enable_psr) {
+	if (!i915_params.enable_psr) {
 		DRM_DEBUG_KMS("PSR disable by flag\n");
 		return false;
 	}
drivers/gpu/drm/i915/intel_lvds.c +3 -3
index 8bcb93a2a9f6..b009c92a4a85 100644
@@ -848,8 +848,8 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	/* use the module option value if specified */
-	if (i915_lvds_channel_mode > 0)
-		return i915_lvds_channel_mode == 2;
+	if (i915_params.lvds_channel_mode > 0)
+		return i915_params.lvds_channel_mode == 2;
 
 	if (dmi_check_system(intel_dual_link_lvds))
 		return true;
@@ -1036,7 +1036,7 @@ void intel_lvds_init(struct drm_device *dev)
 					intel_find_panel_downclock(dev,
 					fixed_mode, connector);
 				if (intel_connector->panel.downclock_mode !=
-					NULL &&	i915_lvds_downclock) {
+					NULL &&	i915_params.lvds_downclock) {
 					/* We found the downclock for LVDS. */
 					dev_priv->lvds_downclock_avail = true;
 					dev_priv->lvds_downclock =
drivers/gpu/drm/i915/intel_panel.c +4 -11
index 20ebc3e83d39..173cf420c490 100644
@@ -325,13 +325,6 @@ out:
 	pipe_config->gmch_pfit.lvds_border_bits = border;
 }
 
-static int i915_panel_invert_brightness;
-MODULE_PARM_DESC(invert_brightness, "Invert backlight brightness "
-	"(-1 force normal, 0 machine defaults, 1 force inversion), please "
-	"report PCI device ID, subsystem vendor and subsystem device ID "
-	"to [email protected], if your machine needs it. "
-	"It will then be included in an upcoming module version.");
-module_param_named(invert_brightness, i915_panel_invert_brightness, int, 0600);
 static u32 intel_panel_compute_brightness(struct intel_connector *connector,
 					  u32 val)
 {
@@ -341,10 +334,10 @@ static u32 intel_panel_compute_brightness(struct intel_connector *connector,
 
 	WARN_ON(panel->backlight.max == 0);
 
-	if (i915_panel_invert_brightness < 0)
+	if (i915_params.invert_brightness < 0)
 		return val;
 
-	if (i915_panel_invert_brightness > 0 ||
+	if (i915_params.invert_brightness > 0 ||
 	    dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS) {
 		return panel->backlight.max - val;
 	}
@@ -810,13 +803,13 @@ intel_panel_detect(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	/* Assume that the BIOS does not lie through the OpRegion... */
-	if (!i915_panel_ignore_lid && dev_priv->opregion.lid_state) {
+	if (!i915_params.panel_ignore_lid && dev_priv->opregion.lid_state) {
 		return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
 			connector_status_connected :
 			connector_status_disconnected;
 	}
 
-	switch (i915_panel_ignore_lid) {
+	switch (i915_params.panel_ignore_lid) {
 	case -2:
 		return connector_status_connected;
 	case -1:
drivers/gpu/drm/i915/intel_pm.c +7 -7
index 469170c11bb4..70ec956985cb 100644
@@ -466,7 +466,7 @@ void intel_update_fbc(struct drm_device *dev)
 		return;
 	}
 
-	if (!i915_powersave) {
+	if (!i915_params.powersave) {
 		if (set_no_fbc_reason(dev_priv, FBC_MODULE_PARAM))
 			DRM_DEBUG_KMS("fbc disabled per module param\n");
 		return;
@@ -505,13 +505,13 @@ void intel_update_fbc(struct drm_device *dev)
 	obj = intel_fb->obj;
 	adjusted_mode = &intel_crtc->config.adjusted_mode;
 
-	if (i915_enable_fbc < 0 &&
+	if (i915_params.enable_fbc < 0 &&
 	    INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev)) {
 		if (set_no_fbc_reason(dev_priv, FBC_CHIP_DEFAULT))
 			DRM_DEBUG_KMS("disabled per chip default\n");
 		goto out_disable;
 	}
-	if (!i915_enable_fbc) {
+	if (!i915_params.enable_fbc) {
 		if (set_no_fbc_reason(dev_priv, FBC_MODULE_PARAM))
 			DRM_DEBUG_KMS("fbc disabled per module param\n");
 		goto out_disable;
@@ -3166,8 +3166,8 @@ int intel_enable_rc6(const struct drm_device *dev)
 		return 0;
 
 	/* Respect the kernel parameter if it is set */
-	if (i915_enable_rc6 >= 0)
-		return i915_enable_rc6;
+	if (i915_params.enable_rc6 >= 0)
+		return i915_params.enable_rc6;
 
 	/* Disable RC6 on Ironlake */
 	if (INTEL_INFO(dev)->gen == 5)
@@ -4724,7 +4724,7 @@ static void gen8_init_clock_gating(struct drm_device *dev)
 	/* FIXME(BDW): Check all the w/a, some might only apply to
 	 * pre-production hw. */
 
-	WARN(!i915_preliminary_hw_support,
+	WARN(!i915_params.preliminary_hw_support,
 	     "GEN8_CENTROID_PIXEL_OPT_DIS not be needed for production\n");
 	I915_WRITE(HALF_SLICE_CHICKEN3,
 		   _MASKED_BIT_ENABLE(GEN8_CENTROID_PIXEL_OPT_DIS));
@@ -5287,7 +5287,7 @@ static void __intel_power_well_put(struct drm_device *dev,
 	WARN_ON(!power_well->count);
 
 	if (!--power_well->count && power_well->set &&
-	    i915_disable_power_well) {
+	    i915_params.disable_power_well) {
 		power_well->set(dev, power_well, false);
 		hsw_enable_package_c8(dev_priv);
 	}
Signature · 1 line
1.7.9.5
Reviewed-by on v1 1/1
#1 lore raw

2014/1/3 Jani Nikula <[email protected]>:

Quoted 7 lines

With 20+ module parameters I think referring to them via a struct improves clarity. The downsides are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_drv.c.

Quoted 667 lines
---
 drivers/gpu/drm/i915/i915_drv.c            |  115 +++++++++++++++-------------
 drivers/gpu/drm/i915/i915_drv.h            |   51 ++++++------
 drivers/gpu/drm/i915/i915_gem.c            |    4 +-
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |    2 +-
 drivers/gpu/drm/i915/i915_gem_gtt.c        |    2 +-
 drivers/gpu/drm/i915/i915_irq.c            |    4 +-
 drivers/gpu/drm/i915/intel_bios.c          |    4 +-
 drivers/gpu/drm/i915/intel_display.c       |   24 +++---
 drivers/gpu/drm/i915/intel_dp.c            |    2 +-
 drivers/gpu/drm/i915/intel_lvds.c          |    6 +-
 drivers/gpu/drm/i915/intel_panel.c         |   15 +---
 drivers/gpu/drm/i915/intel_pm.c            |   14 ++--
 12 files changed, 127 insertions(+), 116 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +63 -52
index 61fb9fc12064..a5965adb1dac 100644
@@ -38,33 +38,53 @@
 #include <linux/module.h>
 #include <drm/drm_crtc_helper.h>
 
-static int i915_modeset __read_mostly = -1;
-module_param_named(modeset, i915_modeset, int, 0400);
+struct i915_module_params i915_params __read_mostly = {
+       .modeset = -1,
+       .fbpercrtc = 0,
+       .panel_ignore_lid = 1,
+       .powersave = 1,
+       .semaphores = -1,
+       .lvds_downclock = 0,
+       .lvds_channel_mode = 0,
+       .panel_use_ssc = -1,
+       .vbt_sdvo_panel_type = -1,
+       .enable_rc6 = -1,
+       .enable_fbc = -1,
+       .enable_hangcheck = true,
+       .enable_ppgtt = -1,
+       .enable_psr = 0,
+       .preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
+       .disable_power_well = 1,
+       .enable_ips = 1,
+       .fastboot = 0,
+       .enable_pc8 = 1,
+       .pc8_timeout = 5000,
+       .prefault_disable = 0,
+       .try_reset = true,
+       .invert_brightness = 0,
+};
+
+module_param_named(modeset, i915_params.modeset, int, 0400);
 MODULE_PARM_DESC(modeset,
                "Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
                "1=on, -1=force vga console preference [default])");
 
-unsigned int i915_fbpercrtc __always_unused = 0;
-module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
+module_param_named(fbpercrtc, i915_params.fbpercrtc, int, 0400);
 
-int i915_panel_ignore_lid __read_mostly = 1;
-module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
+module_param_named(panel_ignore_lid, i915_params.panel_ignore_lid, int, 0600);
 MODULE_PARM_DESC(panel_ignore_lid,
                "Override lid status (0=autodetect, 1=autodetect disabled [default], "
                "-1=force lid closed, -2=force lid open)");
 
-unsigned int i915_powersave __read_mostly = 1;
-module_param_named(powersave, i915_powersave, int, 0600);
+module_param_named(powersave, i915_params.powersave, int, 0600);
 MODULE_PARM_DESC(powersave,
                "Enable powersavings, fbc, downclocking, etc. (default: true)");
 
-int i915_semaphores __read_mostly = -1;
-module_param_named(semaphores, i915_semaphores, int, 0600);
+module_param_named(semaphores, i915_params.semaphores, int, 0600);
 MODULE_PARM_DESC(semaphores,
                "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
 
-int i915_enable_rc6 __read_mostly = -1;
-module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
+module_param_named(i915_enable_rc6, i915_params.enable_rc6, int, 0400);
 MODULE_PARM_DESC(i915_enable_rc6,
                "Enable power-saving render C-state 6. "
                "Different stages can be selected via bitmask values "
@@ -72,89 +92,80 @@ MODULE_PARM_DESC(i915_enable_rc6,
                "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
                "default: -1 (use per-chip default)");
 
-int i915_enable_fbc __read_mostly = -1;
-module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
+module_param_named(i915_enable_fbc, i915_params.enable_fbc, int, 0600);
 MODULE_PARM_DESC(i915_enable_fbc,
                "Enable frame buffer compression for power savings "
                "(default: -1 (use per-chip default))");
 
-unsigned int i915_lvds_downclock __read_mostly = 0;
-module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
+module_param_named(lvds_downclock, i915_params.lvds_downclock, int, 0400);
 MODULE_PARM_DESC(lvds_downclock,
                "Use panel (LVDS/eDP) downclocking for power savings "
                "(default: false)");
 
-int i915_lvds_channel_mode __read_mostly;
-module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
+module_param_named(lvds_channel_mode, i915_params.lvds_channel_mode, int, 0600);
 MODULE_PARM_DESC(lvds_channel_mode,
                 "Specify LVDS channel mode "
                 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
 
-int i915_panel_use_ssc __read_mostly = -1;
-module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
+module_param_named(lvds_use_ssc, i915_params.panel_use_ssc, int, 0600);
 MODULE_PARM_DESC(lvds_use_ssc,
                "Use Spread Spectrum Clock with panels [LVDS/eDP] "
                "(default: auto from VBT)");
 
-int i915_vbt_sdvo_panel_type __read_mostly = -1;
-module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
+module_param_named(vbt_sdvo_panel_type, i915_params.vbt_sdvo_panel_type, int, 0600);
 MODULE_PARM_DESC(vbt_sdvo_panel_type,
                "Override/Ignore selection of SDVO panel mode in the VBT "
                "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
 
-static bool i915_try_reset __read_mostly = true;
-module_param_named(reset, i915_try_reset, bool, 0600);
+module_param_named(reset, i915_params.try_reset, bool, 0600);
 MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
 
-bool i915_enable_hangcheck __read_mostly = true;
-module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
+module_param_named(enable_hangcheck, i915_params.enable_hangcheck, bool, 0644);
 MODULE_PARM_DESC(enable_hangcheck,
                "Periodically check GPU activity for detecting hangs. "
                "WARNING: Disabling this can cause system wide hangs. "
                "(default: true)");
 
-int i915_enable_ppgtt __read_mostly = -1;
-module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0400);
+module_param_named(i915_enable_ppgtt, i915_params.enable_ppgtt, int, 0400);
 MODULE_PARM_DESC(i915_enable_ppgtt,
                "Override PPGTT usage. "
                "(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
 
-int i915_enable_psr __read_mostly = 0;
-module_param_named(enable_psr, i915_enable_psr, int, 0600);
+module_param_named(enable_psr, i915_params.enable_psr, int, 0600);
 MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
 
-unsigned int i915_preliminary_hw_support __read_mostly = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT);
-module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600);
+module_param_named(preliminary_hw_support, i915_params.preliminary_hw_support, int, 0600);
 MODULE_PARM_DESC(preliminary_hw_support,
                "Enable preliminary hardware support.");
 
-int i915_disable_power_well __read_mostly = 1;
-module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
+module_param_named(disable_power_well, i915_params.disable_power_well, int, 0600);
 MODULE_PARM_DESC(disable_power_well,
                 "Disable the power well when possible (default: true)");
 
-int i915_enable_ips __read_mostly = 1;
-module_param_named(enable_ips, i915_enable_ips, int, 0600);
+module_param_named(enable_ips, i915_params.enable_ips, int, 0600);
 MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
 
-bool i915_fastboot __read_mostly = 0;
-module_param_named(fastboot, i915_fastboot, bool, 0600);
+module_param_named(fastboot, i915_params.fastboot, bool, 0600);
 MODULE_PARM_DESC(fastboot, "Try to skip unnecessary mode sets at boot time "
                 "(default: false)");
 
-int i915_enable_pc8 __read_mostly = 1;
-module_param_named(enable_pc8, i915_enable_pc8, int, 0600);
+module_param_named(enable_pc8, i915_params.enable_pc8, int, 0600);
 MODULE_PARM_DESC(enable_pc8, "Enable support for low power package C states (PC8+) (default: true)");
 
-int i915_pc8_timeout __read_mostly = 5000;
-module_param_named(pc8_timeout, i915_pc8_timeout, int, 0600);
+module_param_named(pc8_timeout, i915_params.pc8_timeout, int, 0600);
 MODULE_PARM_DESC(pc8_timeout, "Number of msecs of idleness required to enter PC8+ (default: 5000)");
 
-bool i915_prefault_disable __read_mostly;
-module_param_named(prefault_disable, i915_prefault_disable, bool, 0600);
+module_param_named(prefault_disable, i915_params.prefault_disable, bool, 0600);
 MODULE_PARM_DESC(prefault_disable,
                "Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only.");
 
+MODULE_PARM_DESC(invert_brightness, "Invert backlight brightness "
+       "(-1 force normal, 0 machine defaults, 1 force inversion), please "
+       "report PCI device ID, subsystem vendor and subsystem device ID "
+       "to [email protected], if your machine needs it. "
+       "It will then be included in an upcoming module version.");
+module_param_named(invert_brightness, i915_params.invert_brightness, int, 0600);
+
 static struct drm_driver driver;
 
 static const struct intel_device_info intel_i830_info = {
@@ -485,12 +496,12 @@ bool i915_semaphore_is_enabled(struct drm_device *dev)
 
        /* Until we get further testing... */
        if (IS_GEN8(dev)) {
-               WARN_ON(!i915_preliminary_hw_support);
+               WARN_ON(!i915_params.preliminary_hw_support);
                return false;
        }
 
-       if (i915_semaphores >= 0)
-               return i915_semaphores;
+       if (i915_params.semaphores >= 0)
+               return i915_params.semaphores;
 
 #ifdef CONFIG_INTEL_IOMMU
        /* Enable semaphores on SNB when IO remapping is off */
@@ -755,7 +766,7 @@ int i915_reset(struct drm_device *dev)
        bool simulated;
        int ret;
 
-       if (!i915_try_reset)
+       if (!i915_params.try_reset)
                return 0;
 
        mutex_lock(&dev->struct_mutex);
@@ -823,7 +834,7 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
        struct intel_device_info *intel_info =
                (struct intel_device_info *) ent->driver_data;
 
-       if (IS_PRELIMINARY_HW(intel_info) && !i915_preliminary_hw_support) {
+       if (IS_PRELIMINARY_HW(intel_info) && !i915_params.preliminary_hw_support) {
                DRM_INFO("This hardware requires preliminary hardware support.\n"
                         "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
                return -ENODEV;
@@ -1046,14 +1057,14 @@ static int __init i915_init(void)
         * the default behavior.
         */
 #if defined(CONFIG_DRM_I915_KMS)
-       if (i915_modeset != 0)
+       if (i915_params.modeset != 0)
                driver.driver_features |= DRIVER_MODESET;
 #endif
-       if (i915_modeset == 1)
+       if (i915_params.modeset == 1)
                driver.driver_features |= DRIVER_MODESET;
 
 #ifdef CONFIG_VGA_CONSOLE
-       if (vgacon_text_force() && i915_modeset == -1)
+       if (vgacon_text_force() && i915_params.modeset == -1)
                driver.driver_features &= ~DRIVER_MODESET;
 #endif
 
drivers/gpu/drm/i915/i915_drv.h +29 -22
index cc8afff878b1..86fb6fd60862 100644
@@ -1898,26 +1898,33 @@ struct drm_i915_file_private {
 
 extern const struct drm_ioctl_desc i915_ioctls[];
 extern int i915_max_ioctl;
-extern unsigned int i915_fbpercrtc __always_unused;
-extern int i915_panel_ignore_lid __read_mostly;
-extern unsigned int i915_powersave __read_mostly;
-extern int i915_semaphores __read_mostly;
-extern unsigned int i915_lvds_downclock __read_mostly;
-extern int i915_lvds_channel_mode __read_mostly;
-extern int i915_panel_use_ssc __read_mostly;
-extern int i915_vbt_sdvo_panel_type __read_mostly;
-extern int i915_enable_rc6 __read_mostly;
-extern int i915_enable_fbc __read_mostly;
-extern bool i915_enable_hangcheck __read_mostly;
-extern int i915_enable_ppgtt __read_mostly;
-extern int i915_enable_psr __read_mostly;
-extern unsigned int i915_preliminary_hw_support __read_mostly;
-extern int i915_disable_power_well __read_mostly;
-extern int i915_enable_ips __read_mostly;
-extern bool i915_fastboot __read_mostly;
-extern int i915_enable_pc8 __read_mostly;
-extern int i915_pc8_timeout __read_mostly;
-extern bool i915_prefault_disable __read_mostly;
+
+struct i915_module_params {
+       int modeset;
+       unsigned int fbpercrtc;
+       int panel_ignore_lid;
+       unsigned int powersave;
+       int semaphores;
+       unsigned int lvds_downclock;
+       int lvds_channel_mode;
+       int panel_use_ssc;
+       int vbt_sdvo_panel_type;
+       int enable_rc6;
+       int enable_fbc;
+       bool enable_hangcheck;
+       int enable_ppgtt;
+       int enable_psr;
+       unsigned int preliminary_hw_support;
+       int disable_power_well;
+       int enable_ips;
+       bool fastboot;
+       int enable_pc8;
+       int pc8_timeout;
+       bool prefault_disable;
+       bool try_reset;
+       int invert_brightness;
+};
+extern struct i915_module_params i915_params __read_mostly;
 
 extern int i915_suspend(struct drm_device *dev, pm_message_t state);
 extern int i915_resume(struct drm_device *dev);
@@ -2303,10 +2310,10 @@ static inline void i915_gem_chipset_flush(struct drm_device *dev)
 int i915_gem_init_ppgtt(struct drm_device *dev, struct i915_hw_ppgtt *ppgtt);
 static inline bool intel_enable_ppgtt(struct drm_device *dev, bool full)
 {
-       if (i915_enable_ppgtt == 0 || !HAS_ALIASING_PPGTT(dev))
+       if (i915_params.enable_ppgtt == 0 || !HAS_ALIASING_PPGTT(dev))
                return false;
 
-       if (i915_enable_ppgtt == 1 && full)
+       if (i915_params.enable_ppgtt == 1 && full)
                return false;
 
 #ifdef CONFIG_INTEL_IOMMU
drivers/gpu/drm/i915/i915_gem.c +2 -2
index 656406deada0..3107d045831d 100644
@@ -476,7 +476,7 @@ i915_gem_shmem_pread(struct drm_device *dev,
 
                mutex_unlock(&dev->struct_mutex);
 
-               if (likely(!i915_prefault_disable) && !prefaulted) {
+               if (likely(!i915_params.prefault_disable) && !prefaulted) {
                        ret = fault_in_multipages_writeable(user_data, remain);
                        /* Userspace is tricking us, but we've already clobbered
                         * its pages with the prefault and promised to write the
@@ -868,7 +868,7 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
                       args->size))
                return -EFAULT;
 
-       if (likely(!i915_prefault_disable)) {
+       if (likely(!i915_params.prefault_disable)) {
                ret = fault_in_multipages_readable(to_user_ptr(args->data_ptr),
                                                   args->size);
                if (ret)
drivers/gpu/drm/i915/i915_gem_execbuffer.c +1 -1
index bbff8f9b6549..8f5ff676531b 100644
@@ -896,7 +896,7 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec,
                if (!access_ok(VERIFY_WRITE, ptr, length))
                        return -EFAULT;
 
-               if (likely(!i915_prefault_disable)) {
+               if (likely(!i915_params.prefault_disable)) {
                        if (fault_in_multipages_readable(ptr, length))
                                return -EFAULT;
                }
drivers/gpu/drm/i915/i915_gem_gtt.c +1 -1
index 998f9a0b322a..5b4316780104 100644
@@ -1541,7 +1541,7 @@ static inline unsigned int gen8_get_total_gtt_size(u16 bdw_gmch_ctl)
        if (bdw_gmch_ctl)
                bdw_gmch_ctl = 1 << bdw_gmch_ctl;
        if (bdw_gmch_ctl > 4) {
-               WARN_ON(!i915_preliminary_hw_support);
+               WARN_ON(!i915_params.preliminary_hw_support);
                return 4<<20;
        }
 
drivers/gpu/drm/i915/i915_irq.c +2 -2
index 1d44c793bdf4..4c5a96b807f6 100644
@@ -2474,7 +2474,7 @@ static void i915_hangcheck_elapsed(unsigned long data)
 #define HUNG 20
 #define FIRE 30
 
-       if (!i915_enable_hangcheck)
+       if (!i915_params.enable_hangcheck)
                return;
 
        for_each_ring(ring, dev_priv, i) {
@@ -2576,7 +2576,7 @@ static void i915_hangcheck_elapsed(unsigned long data)
 void i915_queue_hangcheck(struct drm_device *dev)
 {
        struct drm_i915_private *dev_priv = dev->dev_private;
-       if (!i915_enable_hangcheck)
+       if (!i915_params.enable_hangcheck)
                return;
 
        mod_timer(&dev_priv->gpu_error.hangcheck_timer,
drivers/gpu/drm/i915/intel_bios.c +2 -2
index f22041973f3a..285bb0ffa7a2 100644
@@ -259,7 +259,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
                        downclock = dvo_timing->clock;
        }
 
-       if (downclock < panel_dvo_timing->clock && i915_lvds_downclock) {
+       if (downclock < panel_dvo_timing->clock && i915_params.lvds_downclock) {
                dev_priv->lvds_downclock_avail = 1;
                dev_priv->lvds_downclock = downclock * 10;
                DRM_DEBUG_KMS("LVDS downclock is found in VBT. "
@@ -318,7 +318,7 @@ parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
        struct drm_display_mode *panel_fixed_mode;
        int index;
 
-       index = i915_vbt_sdvo_panel_type;
+       index = i915_params.vbt_sdvo_panel_type;
        if (index == -2) {
                DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n");
                return;
drivers/gpu/drm/i915/intel_display.c +12 -12
index 4d1357a32c41..81335a2ecf40 100644
@@ -2368,7 +2368,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
         * whether the platform allows pfit disable with pipe active, and only
         * then update the pipesrc and pfit state, even on the flip path.
         */
-       if (i915_fastboot) {
+       if (i915_params.fastboot) {
                const struct drm_display_mode *adjusted_mode =
                        &intel_crtc->config.adjusted_mode;
 
@@ -4553,7 +4553,7 @@ retry:
 static void hsw_compute_ips_config(struct intel_crtc *crtc,
                                   struct intel_crtc_config *pipe_config)
 {
-       pipe_config->ips_enabled = i915_enable_ips &&
+       pipe_config->ips_enabled = i915_params.enable_ips &&
                                   hsw_crtc_supports_ips(crtc) &&
                                   pipe_config->pipe_bpp <= 24;
 }
@@ -4754,8 +4754,8 @@ intel_link_compute_m_n(int bits_per_pixel, int nlanes,
 
 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
 {
-       if (i915_panel_use_ssc >= 0)
-               return i915_panel_use_ssc != 0;
+       if (i915_params.panel_use_ssc >= 0)
+               return i915_params.panel_use_ssc != 0;
        return dev_priv->vbt.lvds_use_ssc
                && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
 }
@@ -4814,7 +4814,7 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
 
        crtc->lowfreq_avail = false;
        if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
-           reduced_clock && i915_powersave) {
+           reduced_clock && i915_params.powersave) {
                I915_WRITE(FP1(pipe), fp2);
                crtc->config.dpll_hw_state.fp1 = fp2;
                crtc->lowfreq_avail = true;
@@ -6311,7 +6311,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
        if (intel_crtc->config.has_dp_encoder)
                intel_dp_set_m_n(intel_crtc);
 
-       if (is_lvds && has_reduced_clock && i915_powersave)
+       if (is_lvds && has_reduced_clock && i915_params.powersave)
                intel_crtc->lowfreq_avail = true;
        else
                intel_crtc->lowfreq_avail = false;
@@ -6679,7 +6679,7 @@ static void __hsw_enable_package_c8(struct drm_i915_private *dev_priv)
                return;
 
        schedule_delayed_work(&dev_priv->pc8.enable_work,
-                             msecs_to_jiffies(i915_pc8_timeout));
+                             msecs_to_jiffies(i915_params.pc8_timeout));
 }
 
 static void __hsw_disable_package_c8(struct drm_i915_private *dev_priv)
@@ -6778,7 +6778,7 @@ static void hsw_update_package_c8(struct drm_device *dev)
        if (!HAS_PC8(dev_priv->dev))
                return;
 
-       if (!i915_enable_pc8)
+       if (!i915_params.enable_pc8)
                return;
 
        mutex_lock(&dev_priv->pc8.lock);
@@ -8163,7 +8163,7 @@ void intel_mark_idle(struct drm_device *dev)
 
        hsw_package_c8_gpu_idle(dev_priv);
 
-       if (!i915_powersave)
+       if (!i915_params.powersave)
                return;
 
        list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
@@ -8183,7 +8183,7 @@ void intel_mark_fb_busy(struct drm_i915_gem_object *obj,
        struct drm_device *dev = obj->base.dev;
        struct drm_crtc *crtc;
 
-       if (!i915_powersave)
+       if (!i915_params.powersave)
                return;
 
        list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
@@ -9815,7 +9815,7 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
                        struct intel_crtc *intel_crtc =
                                to_intel_crtc(set->crtc);
 
-                       if (intel_crtc->active && i915_fastboot) {
+                       if (intel_crtc->active && i915_params.fastboot) {
                                DRM_DEBUG_KMS("crtc has no fb, will flip\n");
                                config->fb_changed = true;
                        } else {
@@ -11197,7 +11197,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
         */
        list_for_each_entry(crtc, &dev->mode_config.crtc_list,
                            base.head) {
-               if (crtc->active && i915_fastboot) {
+               if (crtc->active && i915_params.fastboot) {
                        intel_crtc_mode_from_pipe_config(crtc, &crtc->config);
 
                        DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
drivers/gpu/drm/i915/intel_dp.c +1 -1
index 7df5085973e9..a0755a9f1193 100644
@@ -1661,7 +1661,7 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
                return false;
        }
 
-       if (!i915_enable_psr) {
+       if (!i915_params.enable_psr) {
                DRM_DEBUG_KMS("PSR disable by flag\n");
                return false;
        }
drivers/gpu/drm/i915/intel_lvds.c +3 -3
index 8bcb93a2a9f6..b009c92a4a85 100644
@@ -848,8 +848,8 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
        struct drm_i915_private *dev_priv = dev->dev_private;
 
        /* use the module option value if specified */
-       if (i915_lvds_channel_mode > 0)
-               return i915_lvds_channel_mode == 2;
+       if (i915_params.lvds_channel_mode > 0)
+               return i915_params.lvds_channel_mode == 2;
 
        if (dmi_check_system(intel_dual_link_lvds))
                return true;
@@ -1036,7 +1036,7 @@ void intel_lvds_init(struct drm_device *dev)
                                        intel_find_panel_downclock(dev,
                                        fixed_mode, connector);
                                if (intel_connector->panel.downclock_mode !=
-                                       NULL && i915_lvds_downclock) {
+                                       NULL && i915_params.lvds_downclock) {
                                        /* We found the downclock for LVDS. */
                                        dev_priv->lvds_downclock_avail = true;
                                        dev_priv->lvds_downclock =
drivers/gpu/drm/i915/intel_panel.c +4 -11
index 20ebc3e83d39..173cf420c490 100644
@@ -325,13 +325,6 @@ out:
        pipe_config->gmch_pfit.lvds_border_bits = border;
 }
 
-static int i915_panel_invert_brightness;
-MODULE_PARM_DESC(invert_brightness, "Invert backlight brightness "
-       "(-1 force normal, 0 machine defaults, 1 force inversion), please "
-       "report PCI device ID, subsystem vendor and subsystem device ID "
-       "to [email protected], if your machine needs it. "
-       "It will then be included in an upcoming module version.");
-module_param_named(invert_brightness, i915_panel_invert_brightness, int, 0600);
 static u32 intel_panel_compute_brightness(struct intel_connector *connector,
                                          u32 val)
 {
@@ -341,10 +334,10 @@ static u32 intel_panel_compute_brightness(struct intel_connector *connector,
 
        WARN_ON(panel->backlight.max == 0);
 
-       if (i915_panel_invert_brightness < 0)
+       if (i915_params.invert_brightness < 0)
                return val;
 
-       if (i915_panel_invert_brightness > 0 ||
+       if (i915_params.invert_brightness > 0 ||
            dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS) {
                return panel->backlight.max - val;
        }
@@ -810,13 +803,13 @@ intel_panel_detect(struct drm_device *dev)
        struct drm_i915_private *dev_priv = dev->dev_private;
 
        /* Assume that the BIOS does not lie through the OpRegion... */
-       if (!i915_panel_ignore_lid && dev_priv->opregion.lid_state) {
+       if (!i915_params.panel_ignore_lid && dev_priv->opregion.lid_state) {
                return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
                        connector_status_connected :
                        connector_status_disconnected;
        }
 
-       switch (i915_panel_ignore_lid) {
+       switch (i915_params.panel_ignore_lid) {
        case -2:
                return connector_status_connected;
        case -1:
drivers/gpu/drm/i915/intel_pm.c +7 -8
index 469170c11bb4..70ec956985cb 100644
@@ -466,7 +466,7 @@ void intel_update_fbc(struct drm_device *dev)
                return;
        }
 
-       if (!i915_powersave) {
+       if (!i915_params.powersave) {
                if (set_no_fbc_reason(dev_priv, FBC_MODULE_PARAM))
                        DRM_DEBUG_KMS("fbc disabled per module param\n");
                return;
@@ -505,13 +505,13 @@ void intel_update_fbc(struct drm_device *dev)
        obj = intel_fb->obj;
        adjusted_mode = &intel_crtc->config.adjusted_mode;
 
-       if (i915_enable_fbc < 0 &&
+       if (i915_params.enable_fbc < 0 &&
            INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev)) {
                if (set_no_fbc_reason(dev_priv, FBC_CHIP_DEFAULT))
                        DRM_DEBUG_KMS("disabled per chip default\n");
                goto out_disable;
        }
-       if (!i915_enable_fbc) {
+       if (!i915_params.enable_fbc) {
                if (set_no_fbc_reason(dev_priv, FBC_MODULE_PARAM))
                        DRM_DEBUG_KMS("fbc disabled per module param\n");
                goto out_disable;
@@ -3166,8 +3166,8 @@ int intel_enable_rc6(const struct drm_device *dev)
                return 0;
 
        /* Respect the kernel parameter if it is set */
-       if (i915_enable_rc6 >= 0)
-               return i915_enable_rc6;
+       if (i915_params.enable_rc6 >= 0)
+               return i915_params.enable_rc6;
 
        /* Disable RC6 on Ironlake */
        if (INTEL_INFO(dev)->gen == 5)
@@ -4724,7 +4724,7 @@ static void gen8_init_clock_gating(struct drm_device *dev)
        /* FIXME(BDW): Check all the w/a, some might only apply to
         * pre-production hw. */
 
-       WARN(!i915_preliminary_hw_support,
+       WARN(!i915_params.preliminary_hw_support,
             "GEN8_CENTROID_PIXEL_OPT_DIS not be needed for production\n");
        I915_WRITE(HALF_SLICE_CHICKEN3,
                   _MASKED_BIT_ENABLE(GEN8_CENTROID_PIXEL_OPT_DIS));
@@ -5287,7 +5287,7 @@ static void __intel_power_well_put(struct drm_device *dev,
        WARN_ON(!power_well->count);
 
        if (!--power_well->count && power_well->set &&
-           i915_disable_power_well) {
+           i915_params.disable_power_well) {
                power_well->set(dev, power_well, false);
                hsw_enable_package_c8(dev_priv);
        }
--

1.7.9.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 1 line
Paulo Zanoni
#2 lore raw
Quoted 10 lines · Paulo Zanoni

2014/1/3 Jani Nikula <[email protected]>:

Quoted 7 lines

With 20+ module parameters I think referring to them via a struct improves clarity. The downsides are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_drv.c.

I like this, but with topic/ppgtt in-flight atm it's a bit a pain to merge. Please poke me to take another look at this once ppgtt has settled a bit.
-Daniel

Quoted 678 lines
Quoted 669 lines

---
 drivers/gpu/drm/i915/i915_drv.c            |  115 +++++++++++++++-------------
 drivers/gpu/drm/i915/i915_drv.h            |   51 ++++++------
 drivers/gpu/drm/i915/i915_gem.c            |    4 +-
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |    2 +-
 drivers/gpu/drm/i915/i915_gem_gtt.c        |    2 +-
 drivers/gpu/drm/i915/i915_irq.c            |    4 +-
 drivers/gpu/drm/i915/intel_bios.c          |    4 +-
 drivers/gpu/drm/i915/intel_display.c       |   24 +++---
 drivers/gpu/drm/i915/intel_dp.c            |    2 +-
 drivers/gpu/drm/i915/intel_lvds.c          |    6 +-
 drivers/gpu/drm/i915/intel_panel.c         |   15 +---
 drivers/gpu/drm/i915/intel_pm.c            |   14 ++--
 12 files changed, 127 insertions(+), 116 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +63 -52
index 61fb9fc12064..a5965adb1dac 100644
@@ -38,33 +38,53 @@
 #include <linux/module.h>
 #include <drm/drm_crtc_helper.h>
 
-static int i915_modeset __read_mostly = -1;
-module_param_named(modeset, i915_modeset, int, 0400);
+struct i915_module_params i915_params __read_mostly = {
+       .modeset = -1,
+       .fbpercrtc = 0,
+       .panel_ignore_lid = 1,
+       .powersave = 1,
+       .semaphores = -1,
+       .lvds_downclock = 0,
+       .lvds_channel_mode = 0,
+       .panel_use_ssc = -1,
+       .vbt_sdvo_panel_type = -1,
+       .enable_rc6 = -1,
+       .enable_fbc = -1,
+       .enable_hangcheck = true,
+       .enable_ppgtt = -1,
+       .enable_psr = 0,
+       .preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
+       .disable_power_well = 1,
+       .enable_ips = 1,
+       .fastboot = 0,
+       .enable_pc8 = 1,
+       .pc8_timeout = 5000,
+       .prefault_disable = 0,
+       .try_reset = true,
+       .invert_brightness = 0,
+};
+
+module_param_named(modeset, i915_params.modeset, int, 0400);
 MODULE_PARM_DESC(modeset,
                "Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
                "1=on, -1=force vga console preference [default])");
 
-unsigned int i915_fbpercrtc __always_unused = 0;
-module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
+module_param_named(fbpercrtc, i915_params.fbpercrtc, int, 0400);
 
-int i915_panel_ignore_lid __read_mostly = 1;
-module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
+module_param_named(panel_ignore_lid, i915_params.panel_ignore_lid, int, 0600);
 MODULE_PARM_DESC(panel_ignore_lid,
                "Override lid status (0=autodetect, 1=autodetect disabled [default], "
                "-1=force lid closed, -2=force lid open)");
 
-unsigned int i915_powersave __read_mostly = 1;
-module_param_named(powersave, i915_powersave, int, 0600);
+module_param_named(powersave, i915_params.powersave, int, 0600);
 MODULE_PARM_DESC(powersave,
                "Enable powersavings, fbc, downclocking, etc. (default: true)");
 
-int i915_semaphores __read_mostly = -1;
-module_param_named(semaphores, i915_semaphores, int, 0600);
+module_param_named(semaphores, i915_params.semaphores, int, 0600);
 MODULE_PARM_DESC(semaphores,
                "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
 
-int i915_enable_rc6 __read_mostly = -1;
-module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
+module_param_named(i915_enable_rc6, i915_params.enable_rc6, int, 0400);
 MODULE_PARM_DESC(i915_enable_rc6,
                "Enable power-saving render C-state 6. "
                "Different stages can be selected via bitmask values "
@@ -72,89 +92,80 @@ MODULE_PARM_DESC(i915_enable_rc6,
                "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
                "default: -1 (use per-chip default)");
 
-int i915_enable_fbc __read_mostly = -1;
-module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
+module_param_named(i915_enable_fbc, i915_params.enable_fbc, int, 0600);
 MODULE_PARM_DESC(i915_enable_fbc,
                "Enable frame buffer compression for power savings "
                "(default: -1 (use per-chip default))");
 
-unsigned int i915_lvds_downclock __read_mostly = 0;
-module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
+module_param_named(lvds_downclock, i915_params.lvds_downclock, int, 0400);
 MODULE_PARM_DESC(lvds_downclock,
                "Use panel (LVDS/eDP) downclocking for power savings "
                "(default: false)");
 
-int i915_lvds_channel_mode __read_mostly;
-module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
+module_param_named(lvds_channel_mode, i915_params.lvds_channel_mode, int, 0600);
 MODULE_PARM_DESC(lvds_channel_mode,
                 "Specify LVDS channel mode "
                 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
 
-int i915_panel_use_ssc __read_mostly = -1;
-module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
+module_param_named(lvds_use_ssc, i915_params.panel_use_ssc, int, 0600);
 MODULE_PARM_DESC(lvds_use_ssc,
                "Use Spread Spectrum Clock with panels [LVDS/eDP] "
                "(default: auto from VBT)");
 
-int i915_vbt_sdvo_panel_type __read_mostly = -1;
-module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
+module_param_named(vbt_sdvo_panel_type, i915_params.vbt_sdvo_panel_type, int, 0600);
 MODULE_PARM_DESC(vbt_sdvo_panel_type,
                "Override/Ignore selection of SDVO panel mode in the VBT "
                "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
 
-static bool i915_try_reset __read_mostly = true;
-module_param_named(reset, i915_try_reset, bool, 0600);
+module_param_named(reset, i915_params.try_reset, bool, 0600);
 MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
 
-bool i915_enable_hangcheck __read_mostly = true;
-module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
+module_param_named(enable_hangcheck, i915_params.enable_hangcheck, bool, 0644);
 MODULE_PARM_DESC(enable_hangcheck,
                "Periodically check GPU activity for detecting hangs. "
                "WARNING: Disabling this can cause system wide hangs. "
                "(default: true)");
 
-int i915_enable_ppgtt __read_mostly = -1;
-module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0400);
+module_param_named(i915_enable_ppgtt, i915_params.enable_ppgtt, int, 0400);
 MODULE_PARM_DESC(i915_enable_ppgtt,
                "Override PPGTT usage. "
                "(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
 
-int i915_enable_psr __read_mostly = 0;
-module_param_named(enable_psr, i915_enable_psr, int, 0600);
+module_param_named(enable_psr, i915_params.enable_psr, int, 0600);
 MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
 
-unsigned int i915_preliminary_hw_support __read_mostly = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT);
-module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600);
+module_param_named(preliminary_hw_support, i915_params.preliminary_hw_support, int, 0600);
 MODULE_PARM_DESC(preliminary_hw_support,
                "Enable preliminary hardware support.");
 
-int i915_disable_power_well __read_mostly = 1;
-module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
+module_param_named(disable_power_well, i915_params.disable_power_well, int, 0600);
 MODULE_PARM_DESC(disable_power_well,
                 "Disable the power well when possible (default: true)");
 
-int i915_enable_ips __read_mostly = 1;
-module_param_named(enable_ips, i915_enable_ips, int, 0600);
+module_param_named(enable_ips, i915_params.enable_ips, int, 0600);
 MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
 
-bool i915_fastboot __read_mostly = 0;
-module_param_named(fastboot, i915_fastboot, bool, 0600);
+module_param_named(fastboot, i915_params.fastboot, bool, 0600);
 MODULE_PARM_DESC(fastboot, "Try to skip unnecessary mode sets at boot time "
                 "(default: false)");
 
-int i915_enable_pc8 __read_mostly = 1;
-module_param_named(enable_pc8, i915_enable_pc8, int, 0600);
+module_param_named(enable_pc8, i915_params.enable_pc8, int, 0600);
 MODULE_PARM_DESC(enable_pc8, "Enable support for low power package C states (PC8+) (default: true)");
 
-int i915_pc8_timeout __read_mostly = 5000;
-module_param_named(pc8_timeout, i915_pc8_timeout, int, 0600);
+module_param_named(pc8_timeout, i915_params.pc8_timeout, int, 0600);
 MODULE_PARM_DESC(pc8_timeout, "Number of msecs of idleness required to enter PC8+ (default: 5000)");
 
-bool i915_prefault_disable __read_mostly;
-module_param_named(prefault_disable, i915_prefault_disable, bool, 0600);
+module_param_named(prefault_disable, i915_params.prefault_disable, bool, 0600);
 MODULE_PARM_DESC(prefault_disable,
                "Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only.");
 
+MODULE_PARM_DESC(invert_brightness, "Invert backlight brightness "
+       "(-1 force normal, 0 machine defaults, 1 force inversion), please "
+       "report PCI device ID, subsystem vendor and subsystem device ID "
+       "to [email protected], if your machine needs it. "
+       "It will then be included in an upcoming module version.");
+module_param_named(invert_brightness, i915_params.invert_brightness, int, 0600);
+
 static struct drm_driver driver;
 
 static const struct intel_device_info intel_i830_info = {
@@ -485,12 +496,12 @@ bool i915_semaphore_is_enabled(struct drm_device *dev)
 
        /* Until we get further testing... */
        if (IS_GEN8(dev)) {
-               WARN_ON(!i915_preliminary_hw_support);
+               WARN_ON(!i915_params.preliminary_hw_support);
                return false;
        }
 
-       if (i915_semaphores >= 0)
-               return i915_semaphores;
+       if (i915_params.semaphores >= 0)
+               return i915_params.semaphores;
 
 #ifdef CONFIG_INTEL_IOMMU
        /* Enable semaphores on SNB when IO remapping is off */
@@ -755,7 +766,7 @@ int i915_reset(struct drm_device *dev)
        bool simulated;
        int ret;
 
-       if (!i915_try_reset)
+       if (!i915_params.try_reset)
                return 0;
 
        mutex_lock(&dev->struct_mutex);
@@ -823,7 +834,7 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
        struct intel_device_info *intel_info =
                (struct intel_device_info *) ent->driver_data;
 
-       if (IS_PRELIMINARY_HW(intel_info) && !i915_preliminary_hw_support) {
+       if (IS_PRELIMINARY_HW(intel_info) && !i915_params.preliminary_hw_support) {
                DRM_INFO("This hardware requires preliminary hardware support.\n"
                         "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
                return -ENODEV;
@@ -1046,14 +1057,14 @@ static int __init i915_init(void)
         * the default behavior.
         */
 #if defined(CONFIG_DRM_I915_KMS)
-       if (i915_modeset != 0)
+       if (i915_params.modeset != 0)
                driver.driver_features |= DRIVER_MODESET;
 #endif
-       if (i915_modeset == 1)
+       if (i915_params.modeset == 1)
                driver.driver_features |= DRIVER_MODESET;
 
 #ifdef CONFIG_VGA_CONSOLE
-       if (vgacon_text_force() && i915_modeset == -1)
+       if (vgacon_text_force() && i915_params.modeset == -1)
                driver.driver_features &= ~DRIVER_MODESET;
 #endif
 
drivers/gpu/drm/i915/i915_drv.h +29 -22
index cc8afff878b1..86fb6fd60862 100644
@@ -1898,26 +1898,33 @@ struct drm_i915_file_private {
 
 extern const struct drm_ioctl_desc i915_ioctls[];
 extern int i915_max_ioctl;
-extern unsigned int i915_fbpercrtc __always_unused;
-extern int i915_panel_ignore_lid __read_mostly;
-extern unsigned int i915_powersave __read_mostly;
-extern int i915_semaphores __read_mostly;
-extern unsigned int i915_lvds_downclock __read_mostly;
-extern int i915_lvds_channel_mode __read_mostly;
-extern int i915_panel_use_ssc __read_mostly;
-extern int i915_vbt_sdvo_panel_type __read_mostly;
-extern int i915_enable_rc6 __read_mostly;
-extern int i915_enable_fbc __read_mostly;
-extern bool i915_enable_hangcheck __read_mostly;
-extern int i915_enable_ppgtt __read_mostly;
-extern int i915_enable_psr __read_mostly;
-extern unsigned int i915_preliminary_hw_support __read_mostly;
-extern int i915_disable_power_well __read_mostly;
-extern int i915_enable_ips __read_mostly;
-extern bool i915_fastboot __read_mostly;
-extern int i915_enable_pc8 __read_mostly;
-extern int i915_pc8_timeout __read_mostly;
-extern bool i915_prefault_disable __read_mostly;
+
+struct i915_module_params {
+       int modeset;
+       unsigned int fbpercrtc;
+       int panel_ignore_lid;
+       unsigned int powersave;
+       int semaphores;
+       unsigned int lvds_downclock;
+       int lvds_channel_mode;
+       int panel_use_ssc;
+       int vbt_sdvo_panel_type;
+       int enable_rc6;
+       int enable_fbc;
+       bool enable_hangcheck;
+       int enable_ppgtt;
+       int enable_psr;
+       unsigned int preliminary_hw_support;
+       int disable_power_well;
+       int enable_ips;
+       bool fastboot;
+       int enable_pc8;
+       int pc8_timeout;
+       bool prefault_disable;
+       bool try_reset;
+       int invert_brightness;
+};
+extern struct i915_module_params i915_params __read_mostly;
 
 extern int i915_suspend(struct drm_device *dev, pm_message_t state);
 extern int i915_resume(struct drm_device *dev);
@@ -2303,10 +2310,10 @@ static inline void i915_gem_chipset_flush(struct drm_device *dev)
 int i915_gem_init_ppgtt(struct drm_device *dev, struct i915_hw_ppgtt *ppgtt);
 static inline bool intel_enable_ppgtt(struct drm_device *dev, bool full)
 {
-       if (i915_enable_ppgtt == 0 || !HAS_ALIASING_PPGTT(dev))
+       if (i915_params.enable_ppgtt == 0 || !HAS_ALIASING_PPGTT(dev))
                return false;
 
-       if (i915_enable_ppgtt == 1 && full)
+       if (i915_params.enable_ppgtt == 1 && full)
                return false;
 
 #ifdef CONFIG_INTEL_IOMMU
drivers/gpu/drm/i915/i915_gem.c +2 -2
index 656406deada0..3107d045831d 100644
@@ -476,7 +476,7 @@ i915_gem_shmem_pread(struct drm_device *dev,
 
                mutex_unlock(&dev->struct_mutex);
 
-               if (likely(!i915_prefault_disable) && !prefaulted) {
+               if (likely(!i915_params.prefault_disable) && !prefaulted) {
                        ret = fault_in_multipages_writeable(user_data, remain);
                        /* Userspace is tricking us, but we've already clobbered
                         * its pages with the prefault and promised to write the
@@ -868,7 +868,7 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
                       args->size))
                return -EFAULT;
 
-       if (likely(!i915_prefault_disable)) {
+       if (likely(!i915_params.prefault_disable)) {
                ret = fault_in_multipages_readable(to_user_ptr(args->data_ptr),
                                                   args->size);
                if (ret)
drivers/gpu/drm/i915/i915_gem_execbuffer.c +1 -1
index bbff8f9b6549..8f5ff676531b 100644
@@ -896,7 +896,7 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec,
                if (!access_ok(VERIFY_WRITE, ptr, length))
                        return -EFAULT;
 
-               if (likely(!i915_prefault_disable)) {
+               if (likely(!i915_params.prefault_disable)) {
                        if (fault_in_multipages_readable(ptr, length))
                                return -EFAULT;
                }
drivers/gpu/drm/i915/i915_gem_gtt.c +1 -1
index 998f9a0b322a..5b4316780104 100644
@@ -1541,7 +1541,7 @@ static inline unsigned int gen8_get_total_gtt_size(u16 bdw_gmch_ctl)
        if (bdw_gmch_ctl)
                bdw_gmch_ctl = 1 << bdw_gmch_ctl;
        if (bdw_gmch_ctl > 4) {
-               WARN_ON(!i915_preliminary_hw_support);
+               WARN_ON(!i915_params.preliminary_hw_support);
                return 4<<20;
        }
 
drivers/gpu/drm/i915/i915_irq.c +2 -2
index 1d44c793bdf4..4c5a96b807f6 100644
@@ -2474,7 +2474,7 @@ static void i915_hangcheck_elapsed(unsigned long data)
 #define HUNG 20
 #define FIRE 30
 
-       if (!i915_enable_hangcheck)
+       if (!i915_params.enable_hangcheck)
                return;
 
        for_each_ring(ring, dev_priv, i) {
@@ -2576,7 +2576,7 @@ static void i915_hangcheck_elapsed(unsigned long data)
 void i915_queue_hangcheck(struct drm_device *dev)
 {
        struct drm_i915_private *dev_priv = dev->dev_private;
-       if (!i915_enable_hangcheck)
+       if (!i915_params.enable_hangcheck)
                return;
 
        mod_timer(&dev_priv->gpu_error.hangcheck_timer,
drivers/gpu/drm/i915/intel_bios.c +2 -2
index f22041973f3a..285bb0ffa7a2 100644
@@ -259,7 +259,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
                        downclock = dvo_timing->clock;
        }
 
-       if (downclock < panel_dvo_timing->clock && i915_lvds_downclock) {
+       if (downclock < panel_dvo_timing->clock && i915_params.lvds_downclock) {
                dev_priv->lvds_downclock_avail = 1;
                dev_priv->lvds_downclock = downclock * 10;
                DRM_DEBUG_KMS("LVDS downclock is found in VBT. "
@@ -318,7 +318,7 @@ parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
        struct drm_display_mode *panel_fixed_mode;
        int index;
 
-       index = i915_vbt_sdvo_panel_type;
+       index = i915_params.vbt_sdvo_panel_type;
        if (index == -2) {
                DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n");
                return;
drivers/gpu/drm/i915/intel_display.c +12 -12
index 4d1357a32c41..81335a2ecf40 100644
@@ -2368,7 +2368,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
         * whether the platform allows pfit disable with pipe active, and only
         * then update the pipesrc and pfit state, even on the flip path.
         */
-       if (i915_fastboot) {
+       if (i915_params.fastboot) {
                const struct drm_display_mode *adjusted_mode =
                        &intel_crtc->config.adjusted_mode;
 
@@ -4553,7 +4553,7 @@ retry:
 static void hsw_compute_ips_config(struct intel_crtc *crtc,
                                   struct intel_crtc_config *pipe_config)
 {
-       pipe_config->ips_enabled = i915_enable_ips &&
+       pipe_config->ips_enabled = i915_params.enable_ips &&
                                   hsw_crtc_supports_ips(crtc) &&
                                   pipe_config->pipe_bpp <= 24;
 }
@@ -4754,8 +4754,8 @@ intel_link_compute_m_n(int bits_per_pixel, int nlanes,
 
 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
 {
-       if (i915_panel_use_ssc >= 0)
-               return i915_panel_use_ssc != 0;
+       if (i915_params.panel_use_ssc >= 0)
+               return i915_params.panel_use_ssc != 0;
        return dev_priv->vbt.lvds_use_ssc
                && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
 }
@@ -4814,7 +4814,7 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
 
        crtc->lowfreq_avail = false;
        if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
-           reduced_clock && i915_powersave) {
+           reduced_clock && i915_params.powersave) {
                I915_WRITE(FP1(pipe), fp2);
                crtc->config.dpll_hw_state.fp1 = fp2;
                crtc->lowfreq_avail = true;
@@ -6311,7 +6311,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
        if (intel_crtc->config.has_dp_encoder)
                intel_dp_set_m_n(intel_crtc);
 
-       if (is_lvds && has_reduced_clock && i915_powersave)
+       if (is_lvds && has_reduced_clock && i915_params.powersave)
                intel_crtc->lowfreq_avail = true;
        else
                intel_crtc->lowfreq_avail = false;
@@ -6679,7 +6679,7 @@ static void __hsw_enable_package_c8(struct drm_i915_private *dev_priv)
                return;
 
        schedule_delayed_work(&dev_priv->pc8.enable_work,
-                             msecs_to_jiffies(i915_pc8_timeout));
+                             msecs_to_jiffies(i915_params.pc8_timeout));
 }
 
 static void __hsw_disable_package_c8(struct drm_i915_private *dev_priv)
@@ -6778,7 +6778,7 @@ static void hsw_update_package_c8(struct drm_device *dev)
        if (!HAS_PC8(dev_priv->dev))
                return;
 
-       if (!i915_enable_pc8)
+       if (!i915_params.enable_pc8)
                return;
 
        mutex_lock(&dev_priv->pc8.lock);
@@ -8163,7 +8163,7 @@ void intel_mark_idle(struct drm_device *dev)
 
        hsw_package_c8_gpu_idle(dev_priv);
 
-       if (!i915_powersave)
+       if (!i915_params.powersave)
                return;
 
        list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
@@ -8183,7 +8183,7 @@ void intel_mark_fb_busy(struct drm_i915_gem_object *obj,
        struct drm_device *dev = obj->base.dev;
        struct drm_crtc *crtc;
 
-       if (!i915_powersave)
+       if (!i915_params.powersave)
                return;
 
        list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
@@ -9815,7 +9815,7 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
                        struct intel_crtc *intel_crtc =
                                to_intel_crtc(set->crtc);
 
-                       if (intel_crtc->active && i915_fastboot) {
+                       if (intel_crtc->active && i915_params.fastboot) {
                                DRM_DEBUG_KMS("crtc has no fb, will flip\n");
                                config->fb_changed = true;
                        } else {
@@ -11197,7 +11197,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
         */
        list_for_each_entry(crtc, &dev->mode_config.crtc_list,
                            base.head) {
-               if (crtc->active && i915_fastboot) {
+               if (crtc->active && i915_params.fastboot) {
                        intel_crtc_mode_from_pipe_config(crtc, &crtc->config);
 
                        DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
drivers/gpu/drm/i915/intel_dp.c +1 -1
index 7df5085973e9..a0755a9f1193 100644
@@ -1661,7 +1661,7 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
                return false;
        }
 
-       if (!i915_enable_psr) {
+       if (!i915_params.enable_psr) {
                DRM_DEBUG_KMS("PSR disable by flag\n");
                return false;
        }
drivers/gpu/drm/i915/intel_lvds.c +3 -3
index 8bcb93a2a9f6..b009c92a4a85 100644
@@ -848,8 +848,8 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
        struct drm_i915_private *dev_priv = dev->dev_private;
 
        /* use the module option value if specified */
-       if (i915_lvds_channel_mode > 0)
-               return i915_lvds_channel_mode == 2;
+       if (i915_params.lvds_channel_mode > 0)
+               return i915_params.lvds_channel_mode == 2;
 
        if (dmi_check_system(intel_dual_link_lvds))
                return true;
@@ -1036,7 +1036,7 @@ void intel_lvds_init(struct drm_device *dev)
                                        intel_find_panel_downclock(dev,
                                        fixed_mode, connector);
                                if (intel_connector->panel.downclock_mode !=
-                                       NULL && i915_lvds_downclock) {
+                                       NULL && i915_params.lvds_downclock) {
                                        /* We found the downclock for LVDS. */
                                        dev_priv->lvds_downclock_avail = true;
                                        dev_priv->lvds_downclock =
drivers/gpu/drm/i915/intel_panel.c +4 -11
index 20ebc3e83d39..173cf420c490 100644
@@ -325,13 +325,6 @@ out:
        pipe_config->gmch_pfit.lvds_border_bits = border;
 }
 
-static int i915_panel_invert_brightness;
-MODULE_PARM_DESC(invert_brightness, "Invert backlight brightness "
-       "(-1 force normal, 0 machine defaults, 1 force inversion), please "
-       "report PCI device ID, subsystem vendor and subsystem device ID "
-       "to [email protected], if your machine needs it. "
-       "It will then be included in an upcoming module version.");
-module_param_named(invert_brightness, i915_panel_invert_brightness, int, 0600);
 static u32 intel_panel_compute_brightness(struct intel_connector *connector,
                                          u32 val)
 {
@@ -341,10 +334,10 @@ static u32 intel_panel_compute_brightness(struct intel_connector *connector,
 
        WARN_ON(panel->backlight.max == 0);
 
-       if (i915_panel_invert_brightness < 0)
+       if (i915_params.invert_brightness < 0)
                return val;
 
-       if (i915_panel_invert_brightness > 0 ||
+       if (i915_params.invert_brightness > 0 ||
            dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS) {
                return panel->backlight.max - val;
        }
@@ -810,13 +803,13 @@ intel_panel_detect(struct drm_device *dev)
        struct drm_i915_private *dev_priv = dev->dev_private;
 
        /* Assume that the BIOS does not lie through the OpRegion... */
-       if (!i915_panel_ignore_lid && dev_priv->opregion.lid_state) {
+       if (!i915_params.panel_ignore_lid && dev_priv->opregion.lid_state) {
                return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
                        connector_status_connected :
                        connector_status_disconnected;
        }
 
-       switch (i915_panel_ignore_lid) {
+       switch (i915_params.panel_ignore_lid) {
        case -2:
                return connector_status_connected;
        case -1:
drivers/gpu/drm/i915/intel_pm.c +7 -8
index 469170c11bb4..70ec956985cb 100644
@@ -466,7 +466,7 @@ void intel_update_fbc(struct drm_device *dev)
                return;
        }
 
-       if (!i915_powersave) {
+       if (!i915_params.powersave) {
                if (set_no_fbc_reason(dev_priv, FBC_MODULE_PARAM))
                        DRM_DEBUG_KMS("fbc disabled per module param\n");
                return;
@@ -505,13 +505,13 @@ void intel_update_fbc(struct drm_device *dev)
        obj = intel_fb->obj;
        adjusted_mode = &intel_crtc->config.adjusted_mode;
 
-       if (i915_enable_fbc < 0 &&
+       if (i915_params.enable_fbc < 0 &&
            INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev)) {
                if (set_no_fbc_reason(dev_priv, FBC_CHIP_DEFAULT))
                        DRM_DEBUG_KMS("disabled per chip default\n");
                goto out_disable;
        }
-       if (!i915_enable_fbc) {
+       if (!i915_params.enable_fbc) {
                if (set_no_fbc_reason(dev_priv, FBC_MODULE_PARAM))
                        DRM_DEBUG_KMS("fbc disabled per module param\n");
                goto out_disable;
@@ -3166,8 +3166,8 @@ int intel_enable_rc6(const struct drm_device *dev)
                return 0;
 
        /* Respect the kernel parameter if it is set */
-       if (i915_enable_rc6 >= 0)
-               return i915_enable_rc6;
+       if (i915_params.enable_rc6 >= 0)
+               return i915_params.enable_rc6;
 
        /* Disable RC6 on Ironlake */
        if (INTEL_INFO(dev)->gen == 5)
@@ -4724,7 +4724,7 @@ static void gen8_init_clock_gating(struct drm_device *dev)
        /* FIXME(BDW): Check all the w/a, some might only apply to
         * pre-production hw. */
 
-       WARN(!i915_preliminary_hw_support,
+       WARN(!i915_params.preliminary_hw_support,
             "GEN8_CENTROID_PIXEL_OPT_DIS not be needed for production\n");
        I915_WRITE(HALF_SLICE_CHICKEN3,
                   _MASKED_BIT_ENABLE(GEN8_CENTROID_PIXEL_OPT_DIS));
@@ -5287,7 +5287,7 @@ static void __intel_power_well_put(struct drm_device *dev,
        WARN_ON(!power_well->count);
 
        if (!--power_well->count && power_well->set &&
-           i915_disable_power_well) {
+           i915_params.disable_power_well) {
                power_well->set(dev, power_well, false);
                hsw_enable_package_c8(dev_priv);
        }
--

1.7.9.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 5 lines
Paulo Zanoni
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#3 lore raw

PATCH v2 1/2 drm/i915: drop the i915.fbpercrtc module parameter

It's unused, and nowadays specifying unknown parameters no longer prevents modules from being loaded.

---
 drivers/gpu/drm/i915/i915_drv.c |    3 ---
 drivers/gpu/drm/i915/i915_drv.h |    1 -
 2 files changed, 4 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -3
index 62c0f16b869d..a543667140fa 100644
@@ -44,9 +44,6 @@ MODULE_PARM_DESC(modeset,
 		"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
 		"1=on, -1=force vga console preference [default])");
 
-unsigned int i915_fbpercrtc __always_unused = 0;
-module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
-
 int i915_panel_ignore_lid __read_mostly = 1;
 module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
 MODULE_PARM_DESC(panel_ignore_lid,
drivers/gpu/drm/i915/i915_drv.h +0 -1
index f888fea9cb5d..56c720b789bc 100644
@@ -1896,7 +1896,6 @@ struct drm_i915_file_private {
 
 extern const struct drm_ioctl_desc i915_ioctls[];
 extern int i915_max_ioctl;
-extern unsigned int i915_fbpercrtc __always_unused;
 extern int i915_panel_ignore_lid __read_mostly;
 extern unsigned int i915_powersave __read_mostly;
 extern int i915_semaphores __read_mostly;
Signature · 1 line
1.7.9.5
#4 lore raw

PATCH v2 2/2 drm/i915: move module parameters into a struct, in a new file

With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c.

Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset".

The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references:

$ git grep "i915\." -- drivers/gpu/drm/i915

v2:
- move the definitions into a new file
- s/i915_params/i915/
- make i915_try_reset i915.reset, for consistency

---
 drivers/gpu/drm/i915/Makefile              |    1 +
 drivers/gpu/drm/i915/i915_drv.c            |  130 ++---------------------
 drivers/gpu/drm/i915/i915_drv.h            |   50 +++++----
 drivers/gpu/drm/i915/i915_gem.c            |    4 +-
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |    2 +-
 drivers/gpu/drm/i915/i915_gem_gtt.c        |    2 +-
 drivers/gpu/drm/i915/i915_irq.c            |    4 +-
 drivers/gpu/drm/i915/i915_params.c         |  155 ++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_bios.c          |    4 +-
 drivers/gpu/drm/i915/intel_display.c       |   26 ++---
 drivers/gpu/drm/i915/intel_dp.c            |    2 +-
 drivers/gpu/drm/i915/intel_lvds.c          |    6 +-
 drivers/gpu/drm/i915/intel_panel.c         |   15 +--
 drivers/gpu/drm/i915/intel_pm.c            |   12 +--
 14 files changed, 228 insertions(+), 185 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/i915_params.c
drivers/gpu/drm/i915/Makefile +1 -0
index da682cbcb806..4850494bd548 100644
@@ -14,6 +14,7 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o \
 	  i915_gem_gtt.o \
 	  i915_gem_stolen.o \
 	  i915_gem_tiling.o \
+	  i915_params.o \
 	  i915_sysfs.o \
 	  i915_trace_points.o \
 	  i915_ums.o \
drivers/gpu/drm/i915/i915_drv.c +8 -122

168 lines not on this page · raw message

drivers/gpu/drm/i915/i915_drv.h +29 -21

70 lines not on this page · raw message

drivers/gpu/drm/i915/i915_gem.c +2 -2
index 5fcdb142d4b8..2926b24cbeb9 100644
@@ -476,7 +476,7 @@ i915_gem_shmem_pread(struct drm_device *dev,
 
 		mutex_unlock(&dev->struct_mutex);
 
-		if (likely(!i915_prefault_disable) && !prefaulted) {
+		if (likely(!i915.prefault_disable) && !prefaulted) {
 			ret = fault_in_multipages_writeable(user_data, remain);
 			/* Userspace is tricking us, but we've already clobbered
 			 * its pages with the prefault and promised to write the
@@ -868,7 +868,7 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 		       args->size))
 		return -EFAULT;
 
-	if (likely(!i915_prefault_disable)) {
+	if (likely(!i915.prefault_disable)) {
 		ret = fault_in_multipages_readable(to_user_ptr(args->data_ptr),
 						   args->size);
 		if (ret)
drivers/gpu/drm/i915/i915_gem_execbuffer.c +1 -1
index 0c6bcff740c2..032def901f98 100644
@@ -896,7 +896,7 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec,
 		if (!access_ok(VERIFY_WRITE, ptr, length))
 			return -EFAULT;
 
-		if (likely(!i915_prefault_disable)) {
+		if (likely(!i915.prefault_disable)) {
 			if (fault_in_multipages_readable(ptr, length))
 				return -EFAULT;
 		}
drivers/gpu/drm/i915/i915_gem_gtt.c +1 -1
index 3192089cb0bf..6e858e17bb0c 100644
@@ -1542,7 +1542,7 @@ static inline unsigned int gen8_get_total_gtt_size(u16 bdw_gmch_ctl)
 	if (bdw_gmch_ctl)
 		bdw_gmch_ctl = 1 << bdw_gmch_ctl;
 	if (bdw_gmch_ctl > 4) {
-		WARN_ON(!i915_preliminary_hw_support);
+		WARN_ON(!i915.preliminary_hw_support);
 		return 4<<20;
 	}
 
drivers/gpu/drm/i915/i915_irq.c +2 -2
index 160d65d59c07..261f4b809e95 100644
@@ -2474,7 +2474,7 @@ static void i915_hangcheck_elapsed(unsigned long data)
 #define HUNG 20
 #define FIRE 30
 
-	if (!i915_enable_hangcheck)
+	if (!i915.enable_hangcheck)
 		return;
 
 	for_each_ring(ring, dev_priv, i) {
@@ -2576,7 +2576,7 @@ static void i915_hangcheck_elapsed(unsigned long data)
 void i915_queue_hangcheck(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	if (!i915_enable_hangcheck)
+	if (!i915.enable_hangcheck)
 		return;
 
 	mod_timer(&dev_priv->gpu_error.hangcheck_timer,
drivers/gpu/drm/i915/i915_params.c new file +155 -0

155 lines not on this page · raw message

drivers/gpu/drm/i915/intel_bios.c +2 -2
index f22041973f3a..86b95ca413d1 100644
@@ -259,7 +259,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
 			downclock = dvo_timing->clock;
 	}
 
-	if (downclock < panel_dvo_timing->clock && i915_lvds_downclock) {
+	if (downclock < panel_dvo_timing->clock && i915.lvds_downclock) {
 		dev_priv->lvds_downclock_avail = 1;
 		dev_priv->lvds_downclock = downclock * 10;
 		DRM_DEBUG_KMS("LVDS downclock is found in VBT. "
@@ -318,7 +318,7 @@ parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
 	struct drm_display_mode *panel_fixed_mode;
 	int index;
 
-	index = i915_vbt_sdvo_panel_type;
+	index = i915.vbt_sdvo_panel_type;
 	if (index == -2) {
 		DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n");
 		return;
drivers/gpu/drm/i915/intel_display.c +13 -13
index 15f55e88372e..ee4660653e03 100644
@@ -2372,7 +2372,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	 * whether the platform allows pfit disable with pipe active, and only
 	 * then update the pipesrc and pfit state, even on the flip path.
 	 */
-	if (i915_fastboot) {
+	if (i915.fastboot) {
 		const struct drm_display_mode *adjusted_mode =
 			&intel_crtc->config.adjusted_mode;
 
@@ -4553,7 +4553,7 @@ retry:
 static void hsw_compute_ips_config(struct intel_crtc *crtc,
 				   struct intel_crtc_config *pipe_config)
 {
-	pipe_config->ips_enabled = i915_enable_ips &&
+	pipe_config->ips_enabled = i915.enable_ips &&
 				   hsw_crtc_supports_ips(crtc) &&
 				   pipe_config->pipe_bpp <= 24;
 }
@@ -4754,8 +4754,8 @@ intel_link_compute_m_n(int bits_per_pixel, int nlanes,
 
 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
 {
-	if (i915_panel_use_ssc >= 0)
-		return i915_panel_use_ssc != 0;
+	if (i915.panel_use_ssc >= 0)
+		return i915.panel_use_ssc != 0;
 	return dev_priv->vbt.lvds_use_ssc
 		&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
 }
@@ -4814,7 +4814,7 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
 
 	crtc->lowfreq_avail = false;
 	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
-	    reduced_clock && i915_powersave) {
+	    reduced_clock && i915.powersave) {
 		I915_WRITE(FP1(pipe), fp2);
 		crtc->config.dpll_hw_state.fp1 = fp2;
 		crtc->lowfreq_avail = true;
@@ -6318,7 +6318,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	if (intel_crtc->config.has_dp_encoder)
 		intel_dp_set_m_n(intel_crtc);
 
-	if (is_lvds && has_reduced_clock && i915_powersave)
+	if (is_lvds && has_reduced_clock && i915.powersave)
 		intel_crtc->lowfreq_avail = true;
 	else
 		intel_crtc->lowfreq_avail = false;
@@ -6686,7 +6686,7 @@ static void __hsw_enable_package_c8(struct drm_i915_private *dev_priv)
 		return;
 
 	schedule_delayed_work(&dev_priv->pc8.enable_work,
-			      msecs_to_jiffies(i915_pc8_timeout));
+			      msecs_to_jiffies(i915.pc8_timeout));
 }
 
 static void __hsw_disable_package_c8(struct drm_i915_private *dev_priv)
@@ -6785,7 +6785,7 @@ static void hsw_update_package_c8(struct drm_device *dev)
 	if (!HAS_PC8(dev_priv->dev))
 		return;
 
-	if (!i915_enable_pc8)
+	if (!i915.enable_pc8)
 		return;
 
 	mutex_lock(&dev_priv->pc8.lock);
@@ -8183,7 +8183,7 @@ void intel_mark_idle(struct drm_device *dev)
 
 	hsw_package_c8_gpu_idle(dev_priv);
 
-	if (!i915_powersave)
+	if (!i915.powersave)
 		return;
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
@@ -8203,7 +8203,7 @@ void intel_mark_fb_busy(struct drm_i915_gem_object *obj,
 	struct drm_device *dev = obj->base.dev;
 	struct drm_crtc *crtc;
 
-	if (!i915_powersave)
+	if (!i915.powersave)
 		return;
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
@@ -9875,7 +9875,7 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
 			struct intel_crtc *intel_crtc =
 				to_intel_crtc(set->crtc);
 
-			if (intel_crtc->active && i915_fastboot) {
+			if (intel_crtc->active && i915.fastboot) {
 				DRM_DEBUG_KMS("crtc has no fb, will flip\n");
 				config->fb_changed = true;
 			} else {
@@ -10126,7 +10126,7 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 		 * flipping, so increasing its cost here shouldn't be a big
 		 * deal).
 		 */
-		if (i915_fastboot && ret == 0)
+		if (i915.fastboot && ret == 0)
 			intel_modeset_check_state(set->crtc->dev);
 	}
 
@@ -11360,7 +11360,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 	 */
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list,
 			    base.head) {
-		if (crtc->active && i915_fastboot) {
+		if (crtc->active && i915.fastboot) {
 			intel_crtc_mode_from_pipe_config(crtc, &crtc->config);
 
 			DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
drivers/gpu/drm/i915/intel_dp.c +1 -1
index 885d271942b3..eb38a77aed0f 100644
@@ -1684,7 +1684,7 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
 		return false;
 	}
 
-	if (!i915_enable_psr) {
+	if (!i915.enable_psr) {
 		DRM_DEBUG_KMS("PSR disable by flag\n");
 		return false;
 	}
drivers/gpu/drm/i915/intel_lvds.c +3 -3
index 8bcb93a2a9f6..3f3043b4ff26 100644
@@ -848,8 +848,8 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	/* use the module option value if specified */
-	if (i915_lvds_channel_mode > 0)
-		return i915_lvds_channel_mode == 2;
+	if (i915.lvds_channel_mode > 0)
+		return i915.lvds_channel_mode == 2;
 
 	if (dmi_check_system(intel_dual_link_lvds))
 		return true;
@@ -1036,7 +1036,7 @@ void intel_lvds_init(struct drm_device *dev)
 					intel_find_panel_downclock(dev,
 					fixed_mode, connector);
 				if (intel_connector->panel.downclock_mode !=
-					NULL &&	i915_lvds_downclock) {
+					NULL &&	i915.lvds_downclock) {
 					/* We found the downclock for LVDS. */
 					dev_priv->lvds_downclock_avail = true;
 					dev_priv->lvds_downclock =
drivers/gpu/drm/i915/intel_panel.c +4 -11
index 9f83ab06fb5e..f1ee2c4d282e 100644
@@ -323,13 +323,6 @@ out:
 	pipe_config->gmch_pfit.lvds_border_bits = border;
 }
 
-static int i915_panel_invert_brightness;
-MODULE_PARM_DESC(invert_brightness, "Invert backlight brightness "
-	"(-1 force normal, 0 machine defaults, 1 force inversion), please "
-	"report PCI device ID, subsystem vendor and subsystem device ID "
-	"to [email protected], if your machine needs it. "
-	"It will then be included in an upcoming module version.");
-module_param_named(invert_brightness, i915_panel_invert_brightness, int, 0600);
 static u32 intel_panel_compute_brightness(struct intel_connector *connector,
 					  u32 val)
 {
@@ -339,10 +332,10 @@ static u32 intel_panel_compute_brightness(struct intel_connector *connector,
 
 	WARN_ON(panel->backlight.max == 0);
 
-	if (i915_panel_invert_brightness < 0)
+	if (i915.invert_brightness < 0)
 		return val;
 
-	if (i915_panel_invert_brightness > 0 ||
+	if (i915.invert_brightness > 0 ||
 	    dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS) {
 		return panel->backlight.max - val;
 	}
@@ -808,13 +801,13 @@ intel_panel_detect(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	/* Assume that the BIOS does not lie through the OpRegion... */
-	if (!i915_panel_ignore_lid && dev_priv->opregion.lid_state) {
+	if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
 		return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
 			connector_status_connected :
 			connector_status_disconnected;
 	}
 
-	switch (i915_panel_ignore_lid) {
+	switch (i915.panel_ignore_lid) {
 	case -2:
 		return connector_status_connected;
 	case -1:
drivers/gpu/drm/i915/intel_pm.c +6 -6
index b9b4fe4e6313..3b61c8bbe718 100644
@@ -466,7 +466,7 @@ void intel_update_fbc(struct drm_device *dev)
 		return;
 	}
 
-	if (!i915_powersave) {
+	if (!i915.powersave) {
 		if (set_no_fbc_reason(dev_priv, FBC_MODULE_PARAM))
 			DRM_DEBUG_KMS("fbc disabled per module param\n");
 		return;
@@ -505,13 +505,13 @@ void intel_update_fbc(struct drm_device *dev)
 	obj = intel_fb->obj;
 	adjusted_mode = &intel_crtc->config.adjusted_mode;
 
-	if (i915_enable_fbc < 0 &&
+	if (i915.enable_fbc < 0 &&
 	    INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev)) {
 		if (set_no_fbc_reason(dev_priv, FBC_CHIP_DEFAULT))
 			DRM_DEBUG_KMS("disabled per chip default\n");
 		goto out_disable;
 	}
-	if (!i915_enable_fbc) {
+	if (!i915.enable_fbc) {
 		if (set_no_fbc_reason(dev_priv, FBC_MODULE_PARAM))
 			DRM_DEBUG_KMS("fbc disabled per module param\n");
 		goto out_disable;
@@ -3151,8 +3151,8 @@ int intel_enable_rc6(const struct drm_device *dev)
 		return 0;
 
 	/* Respect the kernel parameter if it is set */
-	if (i915_enable_rc6 >= 0)
-		return i915_enable_rc6;
+	if (i915.enable_rc6 >= 0)
+		return i915.enable_rc6;
 
 	/* Disable RC6 on Ironlake */
 	if (INTEL_INFO(dev)->gen == 5)
@@ -5274,7 +5274,7 @@ static void __intel_power_well_put(struct drm_device *dev,
 	WARN_ON(!power_well->count);
 
 	if (!--power_well->count && power_well->set &&
-	    i915_disable_power_well) {
+	    i915.disable_power_well) {
 		power_well->set(dev, power_well, false);
 		hsw_enable_package_c8(dev_priv);
 	}
Signature · 6 lines
1.7.9.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

Re: [PATCH v2 2/2] drm/i915: move module parameters into a struct, in a new file

Quoted 16 lines · Jani Nikula

With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c.

Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset".

The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references:

Quoted 8 lines
$ git grep "i915\." -- drivers/gpu/drm/i915

v2:
- move the definitions into a new file
- s/i915_params/i915/
- make i915_try_reset i915.reset, for consistency

Queued for -next, thanks for the patch. While we're at it: Can you please smash another patch on top ot drop the i915_ prefix from the module parameters? i915.i915_ really is a bit verbose ;-) and I think we can declare this to be non-abi, i.e. a good excuse to update all the various bug reports ;-)
-Daniel

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#6 lore raw

Re: [PATCH v2 1/2] drm/i915: drop the i915.fbpercrtc module parameter

In reply to Jani Nikula
Quoted 4 lines · Jani Nikula

It's unused, and nowadays specifying unknown parameters no longer prevents modules from being loaded.

Queued for -next, thanks for the patch.
-Daniel

Quoted 34 lines
---
 drivers/gpu/drm/i915/i915_drv.c |    3 ---
 drivers/gpu/drm/i915/i915_drv.h |    1 -
 2 files changed, 4 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -3
index 62c0f16b869d..a543667140fa 100644
@@ -44,9 +44,6 @@ MODULE_PARM_DESC(modeset,
 		"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
 		"1=on, -1=force vga console preference [default])");
 
-unsigned int i915_fbpercrtc __always_unused = 0;
-module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
-
 int i915_panel_ignore_lid __read_mostly = 1;
 module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
 MODULE_PARM_DESC(panel_ignore_lid,
drivers/gpu/drm/i915/i915_drv.h +0 -1
index f888fea9cb5d..56c720b789bc 100644
@@ -1896,7 +1896,6 @@ struct drm_i915_file_private {
 
 extern const struct drm_ioctl_desc i915_ioctls[];
 extern int i915_max_ioctl;
-extern unsigned int i915_fbpercrtc __always_unused;
 extern int i915_panel_ignore_lid __read_mostly;
 extern unsigned int i915_powersave __read_mostly;
 extern int i915_semaphores __read_mostly;
Signature · 1 line
1.7.9.5
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch