Skip to contentSkip to conversation

keystone: Add pci feature to MACHINE Keystone

PATCH Superseded Sam Nelson 2 participants 2 messages Jan 31, 2014

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Sam Nelson

author
#0 lore raw

PATCH 1/1 keystone: Add pci feature to MACHINE Keystone

- Device support pci interface

---
 conf/machine/include/keystone.inc |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
conf/machine/include/keystone.inc +1 -1
index 72e71bf..02bd295 100644
@@ -20,4 +20,4 @@ UBOOT_LOADADDRESS = "0x80008000"
 EXTRA_IMAGEDEPENDS += "u-boot"
 EXTRA_IMAGEDEPENDS += "boot-monitor"
 
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat"
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat pci"
Signature · 1 line
1.7.9.5
#1 lore raw
Quoted 1 line · Sam Nelson

- Device support pci interface

Ack, but normally you would want to bump MACHINE_KERNEL_PR, which is conveniently located in the same .inc file. That way if someone was building before and after this change, they'll get the kernel and all external modules rebuilt with the change. Otherwise the rebuild won't be triggered, unless you change something else in the kernel or do a clean build (which you always do)

Quoted 22 lines
---
 conf/machine/include/keystone.inc |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
conf/machine/include/keystone.inc +1 -1
index 72e71bf..02bd295 100644
@@ -20,4 +20,4 @@ UBOOT_LOADADDRESS = "0x80008000"
 EXTRA_IMAGEDEPENDS += "u-boot"
 EXTRA_IMAGEDEPENDS += "boot-monitor"
 
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat"
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat pci"
Signature · 6 lines
1.7.9.5

_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti